We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Yuvarlak masa freze makineleri DMG MORI DMU 40

metal çalışma makineleri / freze makineleri / Yuvarlak masa freze makineleri

TOP
Seller

Üretici: DMG MORI

model:DMU 40

Makine türü: Yuvarlak masa freze makineleri

madde-No: 168620029

miktar: 1

tarih: 23.01.2026

yer: Land-de Almanya

fiyat:


Seller-item-No.:040851


General
Universal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7
Working area 1
Longitudinal 550 mm
Cross 450 mm
Vertical 420 mm
Technical Data
Feed rate longitudinal/transverse/vertical 30000/30000/30000 mm/min
Rapid traverse longitudinal/transverse/vertical 30/30/30 m/min


inlineMASTER® spindle speed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools
Clamping System DIN ISO 7388-3-A, AD
Spindle taper SK40 Tool holder DIN ISO 7388-1-A
Speed range 20 - 15000 rpm
Torque (40% DC) 121 Nm
Torque (100% DC) 84 Nm
Drive power (40% DC) 20,3 kW
Drive power (100% DC) 14,5 kW
Tool clamping for HSK-A63 Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)
NC swivel rotary table Swivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
Version Rotary joint, 4 channels, outside of table Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table
Clamping pneumatic, two circuits up to 8,5 bar Clamping pneumatics, 2 clamping circuits up to 8,5 bar
Tool magazine 60 pockets Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air
Mechanical Preparation Oil-mist separator Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø 200mm
Chip removal package with cabin roof Swarf removal package chip conveyor Coolant - air-blast changeover Swarf conveyor, scraper type with cleaned slot screen Spray gun for swarf removal Bed flushing, cabin roof
Internal coolant supply 40bar/600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotary joint in spindle, double cartridge filter 50µm for internal coolant Rotating clear-view window (differently from standard)
Measuring kit Renishaw Measuring kit Renishaw touch probe PP40 optical with tool taper TS27R contact tool D6152871 setting probe for tool length and tool diameter measurement
3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
MPC - Machine Protection Control MPC - Machine Protection Control Machine protection by quick shutdown
Signal lamp 4-colour Signal lamp, 4 colours
Automation interface for external automation PROFINET Automation interface according to DMG MORI specification consisting of: Interface (Profinet) via M65 Automatic loading door Working table with 4-channel rotary joint
Execution of automation interface as PROFIBUS Execution of automation interface as PROFIBUS version Just available in combination with the standard automation interface
Package for tropical climate PLUS Package for tropical climate for inlineMASTER® for ambient temperature max. 50° Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
CAD Import CAD Import: Open CAD files directly in the TNC 640 Extracting of counters and machining positions Supported file formats: DXF; IGES; STEP Supported elements: Line; Circle; Circular arc; Polyline
ATC (Application Tuning Cycle) ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
Bu makineyi Facebook'ta paylaşın:

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

Sana kopyalamak mı?

Save input data


General
Universal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7
Working area 1
Longitudinal 550 mm
Cross 450 mm
Vertical 420 mm
Technical Data
Feed rate longitudinal/transverse/vertical 30000/30000/30000 mm/min
Rapid traverse longitudinal/transverse/vertical 30/30/30 m/min


inlineMASTER® spindle speed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools
Clamping System DIN ISO 7388-3-A, AD
Spindle taper SK40 Tool holder DIN ISO 7388-1-A
Speed range 20 - 15000 rpm
Torque (40% DC) 121 Nm
Torque (100% DC) 84 Nm
Drive power (40% DC) 20,3 kW
Drive power (100% DC) 14,5 kW
Tool clamping for HSK-A63 Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)
NC swivel rotary table Swivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
Version Rotary joint, 4 channels, outside of table Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table
Clamping pneumatic, two circuits up to 8,5 bar Clamping pneumatics, 2 clamping circuits up to 8,5 bar
Tool magazine 60 pockets Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air
Mechanical Preparation Oil-mist separator Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø 200mm
Chip removal package with cabin roof Swarf removal package chip conveyor Coolant - air-blast changeover Swarf conveyor, scraper type with cleaned slot screen Spray gun for swarf removal Bed flushing, cabin roof
Internal coolant supply 40bar/600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotary joint in spindle, double cartridge filter 50µm for internal coolant Rotating clear-view window (differently from standard)
Measuring kit Renishaw Measuring kit Renishaw touch probe PP40 optical with tool taper TS27R contact tool D6152871 setting probe for tool D6152871 length and tool diameter measurement
3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
MPC - Machine Protection Control MPC - Machine Protection Control Machine protection by quick shutdown
Signal lamp 4-colour Signal lamp, 4 colours
Automation interface for external automation PROFINET Automation interface according to DMG MORI specification consisting of: Interface (Profinet) via M65 Automatic loading door Working table with 4-channel rotary joint
Execution of automation interface as PROFIBUS Execution of automation interface as PROFIBUS version Just available in combination with the standard automation interface
Package for tropical climate PLUS Package for tropical climate for inlineMASTER® for ambient temperature max. 50° Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
CAD Import CAD Import: Open CAD files directly in the TNC 640 Extracting of counters and machining positions Supported file formats: DXF; IGES; STEP Supported elements: Line; Circle; Circular arc; Polyline
ATC (Application Tuning Cycle) ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.

seller offer No. resale 040851
Bu makineyi Facebook'ta paylaşın:
izleme listesine ekle
onaylı
Satıcı

satıcı

logo dealer

DMG MORI Used Machines GmbH

Bayan Kerstin Bauer
82538 Geretsried
Germany

RESALE üye beri 2019


verified user
[ bayi profili ]
  • makine listesi (149)
sorgu gönderme
sorgu gönderme

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

(böyle bir makine için tüm bayilere)

Sana kopyalamak mı?

(soruşturmanızın kopyası e-posta adresinize gönderilecektir)

Save input data

(Save input data for further inquiries)

daha DMG MORI DMU 40 + similar DMG MORI-model

DMG MORIDMU 75 monoBLOCK
DMG MORIDMU 80 P duoBLOCK
DMG MORIDMU 65 monoBLOCK
DMG MORIDMU 65 monoBLOCK
2008 DMG MORIDMU 50 EVO LINEAR
2012 DMG MORIDMU 40 Evo/PW
2010 DMG MORIDMU 40 ) 2250 EUR
2016 DMG MORIDMU 50
DMG MORIDMU 40
2014 DMG MORIDMU 80 EVO LINEAR

fiyat: sold DMG MORI DMU 40 + benzer DMG MORI-model

2014 DMG MORIDMU 50 Ecoline 49170 EUR [Dec 2024]
2010 DMG MORIDMU 40 MONOBLOCK 115000 EUR [Nov 2019]
2021 DMG MORIDMU 50 2nd generation 130000 EUR [Nov 2024]
2020 DMG MORIDMU 65 monoBLOCK 5-Axis 82400 EUR [Nov 2024]
2015 DMG MORIDMU 50 125000 EUR [Jan 2019]