subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 101)
Machine is dismantled and stored (see photos). May show traces of storage Auction-ID: A7-49688-2
Core drilling machine / diamond drill Brand: Daewoo Type: DADK-D230BE Peak power: 4580 watts Speed: 100-530 RPM (infinitely adjustable) Max. Drilling Diameter: 230 mm Max. Drilling Depth: 550 mm Drill connection: 1/2 inch internal, 5/4 inch external Equipped with: digital display Equipped with: connection for water cooling Equipped with: 30 milliamp residual current device (PRCD) Tripod: Adjustable aluminum tripod Condition: unused, in the original packaging Attention: diamond drill bit not included Auction-ID: A3-46152-1066
A-axis 0-360grd, miter saw ø 550mm, feed conveyor approximately 6mtr, discharge conveyor approximately 5mtr, including walk-in protection, chip extraction Auction-ID: A1-48474-3
Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler Auction-ID: A1-49370-8
CNC Control: Siemens 828D ShopMillCourses X/Y/Z: 1220 / 600 / 610 mmTotal power: 10 / 14 kWSpindle speed: 8,000 rpmSpindle taper: SK40Tool magazine: 20 positionsEquipment: Chip conveyor, coolant, technical documentationPower supply: 400 V – 50 HzManufacturer: HuronYear: 2012Serial number: M02741Estimated dimensions (mm): 3500 x 2800 x 3200Weight (kg): 10000 Auction-ID: A1-49171-10
Serial number: 498-56Important note: A new spindle has recently been installedTravel paths: X: 800 mm Y: 500+50 mm Z: 550 mmSpindle speed: 12000 rpmTool holder: SK 40Number of tool positions: 40Control: SIEMENS SINUMERIK 840 Dincl. chip conveyor from KNOLL, paper belt filter system from KNOLL, zero-point clamping system from SCHUNK Type: SDE 138Table dimensions: 850 x 350 mmincl. the tool holders and tools on the tool changerincl. touch probe as shown in the pictures Atruck with a width of 3000 mm is required for transportReference: Wittner - Lot 11 Auction-ID: A7-49056-412
Technical data Manufacturer: HURCO Model: VMX42i Date of manufacture: 2018/3/6 Spindle speed: 12,000 rpm Machine mass according to nameplate: 6,450 kg Travel X/Y/Z: 1,067 / 610 / 610 mm (Source: Online research) Table size: 1,270 x 610 mm (Source: Online research) Max. table load: 1,750 kg (Source: Online research) Spindle power: 18 kW (Source: online research) Tool holder: ISO 40 (Source: Online Research) Tool changer: 30 places (Source: Online Research) Control: HURCO MAX5 / WinMax with double screen (Source: Online research) Configuration 3-axis CNC vertical machining center with 2 machine vices, chip conveyor and separate cooling/tempering unit. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Note information researched to the best of my knowledge and belief. No guarantee is given for completeness and ...
TOYODA FH400J horizontal CNC machining center equipped with a 58-position tool magazine, ideal for industrial production and machining of complex parts. Thanks to its high-capacity magazine, this machine allows: Automatic sequence of many operations Reduced machine downtime series production with long cycles High machining flexibility Coupled with its turntable and multi-piece clamping system, this horizontal center offers high productivity and optimal precision. Machine perfectly suited for: CNC machine shops Industrial production Precision mechanics Subcontracting Automotive, energy, general mechanical engineering sectors TOYODA centers are known for their robustness, rigidity and reliability in continuous production. Auction-ID: A1-48554-8
Equipped with 4 pneumatic clamps Auction-ID: A1-48474-1
Machine number: 33905Operating voltage: 400 VFrequency: 50 HzRated current: 5 ASpindle speed: from 120 to 2200 rpmDrilling depth: 160 mmTable dimensions: 400 x 300 mmwith two grooves and a vice, jaw width: 70 mm Auction-ID: A7-49089-268
machine ready for transport and to be assessed on viewing day Not included tooling Auction-ID: A1-48648-133
Technical details Manufacturer: Csepel Type: Radial drilling machine Configuration: - Heavy-duty radial arm - Rotating column - Vertically adjustable drilling head - Geared spindle drive - Manual and power spindle feed - Drill chuck installed - Large T-slotted box table - T-slotted base plate - Speed and feed selector gearbox - Mechanical control system Application: - Drilling - Boring - Tapping - Reaming - Machining of large steel workpieces Construction: - Heavy-duty cast-iron frame - Conventional mechanical operation Estimated drilling capacity: Approx. 75 mm in steel Estimated arm reach: Approx. 1750–2000 mm Dimensions: - Length: Approx. 2500 mm - Width: Approx. 1200 mm - Height: Approx. 2900 mm Weight: Approx. 4500 kg Condition: Used Observed condition: - Machine appears substantially complete - Original gearbox and controls installed - Drill chuck fitted - Large cast T-slotted ta ...
Machine is dismantled and stored (see photos). May show traces of storage. Auction-ID: A7-49688-1
With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-49592-15
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-49056-157
Pallet size 630 x 630 mm; 60 tool magazine; Please note! Tools in the warehouse are not included in this lot! Auction-ID: A1-49365-78
Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-49302-1008
With double pallet, Mori Seiki M730BM control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-49592-7
Serial number: 416158Travel X-axis: 1200 mmTravel Y-axis: 900 mmTravel Z-axis: 250 mmZ-passage: 200 mmT-slot clamping table: 1250 x 1000 mmSpeed: max. 20,000 rpmTable dimensions: approx. 1250 x 1000 mmfor further technical data see pictureswith documentationwith accessoriesImportant note: the tool changer is not installed !Reference: Wup - Lot 16 Auction-ID: A7-49056-69
Column drill with: automatic feed Tapping function. Digital depth display 2 Stage Motor Spindle protection Swivel table LED lighting Coolant system Drilling capacity in steel 40 mm Projection 350 mm Drilling stroke 180 mm Spindle mount MK 4 MK Table: 560 x 560 mm Column diameter 140 mm Speed 50 - 1450 rpm Feeds 0.1 - 0.2 mm/rev Total power requirement 1.5 kW Machine weight approx. 580 kg Condition: never used / new (5) Auction-ID: A7-49782-487
General Description Horizontal metal-cutting band saw - honing machine designed for precision cutting of steel, stainless steel and other metal profiles, tubes and solid materials. The machine is equipped with a hydraulic feed system, hydraulic clamping vise and coolant system for production cutting applications. Technical Details Machine type: Horizontal metal-cutting band saw Hydraulic feed system Hydraulic clamping vise Automatic feed components Drive motor Coolant system Safety enclosure Condition Used industrial condition. The machine appears mechanically complete with hydraulic feed, clamping vise, coolant system and safety enclosure installed. Cosmetic wear, oil residue and metal swarf are visible, consistent with industrial use. Operational status and cutting accuracy have not been tested. Dimensions Length: Approx. 2,800 mm Width: Approx. 1,800 mm Height: Approx. 1,900 mm Wei ...
Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-49782-404
Pneumatic Tapping Machine version with an adjustable angle, Horizontal tapping possible Tapping machine for M3 - M16 threads, Angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-520
Gear Drilling Machine Tapping device Left / Right Run Tilt work table. Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging Dimensions: 2100 x 400 x 710mm Weight 260Kg Drilling capacity in steel 30 mm Projection 250 mm Drilling stroke 130 mm Spindle mount MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Feeds mm/U Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5) Auction-ID: A7-49782-425
Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 48 position ATC Auction-ID: A1-49370-11
RADIAL DRILL SASS mod. TRL 1600 Max. working diameter 90/110 mm Max. spindle/column centre distance 3,020 mm Min. drilling radius 695 mm Max. drilling radius 3.345 mm Min. spindle nose-to-base distance 540 mm Max. distance between spindle nose and base 2.250 mm Spindle - CM 6 110 mm Spindle stroke 550 mm Spindle speed - 24 from 19 to 1.540 RPM Spindle motor power 20 HP Column diameter 650 mm Total weight 15.700 kg Complete with: - Worktop (cube) Auction-ID: A1-48745-25
Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-49782-414
2.000 € 
