Fabricante:
(Categoria: 101)
Pillar drill. Brand: RACHAL. Approximate dimensions: 1,050 x 700 x 2,200 mm. Approximate weight: 500 kg. Auction-ID: A7-48385-90
Works flawlessly With large and small machine vise with threading devices With foot pedal With lighting With attacks Loading 100 EUR Auction-ID: A1-48530-2042
Technical details Manufacturer: HAAS Model: Super Mini Mill Type: CNC vertical machining center with 4th axis Year: 2008 Spindle taper: 40 (BT40 / SK40 compatible) Spindle speed: 10,000 rpm Control system: HAAS CNC control Configuration: - Automatic tool changer (ATC) - Automatic tool magazine - HAAS 4th axis rotary unit with quill - Cooling system Application: Precision CNC milling and multi-axis machining operations Condition: Used, fully functional and maintained Additional notes: - Machine reported clean with no detectable play - No operating errors reported - Can be inspected under power and seen in operation Auction-ID: A7-48425-6
Fanuc 21i-M control, enclosed VMC Spindle taper: BT40 Spindle speed range: 72–10000 rpm Spindle motor power: 5.5/3.7 kW Pull stud bolt type: MAS-P40T-1 Number of tools: 20 Maximum tool weight: 5 kg Maximum tool diameter: 100 mm Maximum tool length: 250 mm Tool change time (T-T): 1.2 sec Tool change time (T-C): 2.8 sec Pallet change method: Turning-table method Pallet change time: 4 sec Drilling capability: Ø22 mm Tapping capability: M18 Milling capability: 20 cc/min Machine weight: 4000 kg NC device: FANUC 21i-MA Auction-ID: A7-48385-28
SOLARUCE model TR2 radial drill. Year of manufacture: 1989. Maximum drilling diameter: 80 mm. Column diameter: 380 mm. Arm length: 1,600 mm. Spindle travel: 350 mm. Status: Working. Approximate dimensions: 2,600 x 1,200 x 2,900 mm (L x W x H). Approximate weight: 3,500 kg. Auction-ID: A7-48385-10
Fadal CNC Machining Center Manufacturer: Fadal Engineering Co. Inc., USA Type: VMC 15RT (Model 914-15) Year of Make: 1995 Serial Number: 95111170 Control: Fadal CNC 88HS Vertical CNC Machining Center 3-axis version Tool changer available Tool holder partly included Machine room equipped with vice Electrical connection: 400 V / 50 Hz Robust industrial design Machine was in production until it was relocated Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-48287-1052
x-travel: 740 (915) mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain iTNC 530 turning speeds: 20-12.000 U/minfeed: 0-15.000 mm/mintool change unit: 16-fach rapid power traverse in X-and Z direction: 30/20 m/mintool taper: SK 40 table surface area: 900 x 528 mmmax. table load: 700 kgspindle hours: 8.961 htotal power requirement: 32,5/17,5 kWweight of the machine ca.: 7,3 tdimensions of the machine ca.: 2,8 x 2,4 x 2,4 mMachining Center HERMLE U 740, built in 2007Accessories:Tool holders, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmTable dimensions: 1300 x 600 mmtable load: 1,0 ttool taper: ISO 40 DIN 69871Aspindle turning speed range: 60 - 12000 U/minrapid traverse: 32 m/minpower capacity: 10 / 17 kWno. of tools in the magazine: 32 Stücktool length - max.: 300 mmTool diameter: 76 / 127 mmweight of tools max.: 8 kgtool changing time: 2,5 sectotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmMachine with only 3.275 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Workpiece changing table, Bh machine 30.092, Bh spindle 12.296, control, tool changer Pickup plate with 20 tool positions, dimensions clamping table approx. 2,000 x 1,150 mm, travel A-axis 180 degrees swivel beam, B-axis 192 degrees, C-axis 372 degrees, incl. 1 pc machine extraction Hurrican see appendix, and 1 pc vacuum filter system Hurrican F 19/900-PL06/7-K10 for the grinding table and manual suction. The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself Auction-ID: A1-48512-9
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 €: 15 mm: MK 2 : 220 mm: 40 - 4000 U/min: 0,75 kW: M12 : 400 mm: 520 mm: 850 mm: 65 kg: 70 mm: 85 - 370 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 NmThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomicDrilling depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS (PRICES ON REQUEST):Machine cabinet with door and drawerDrill package (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
novo
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
novo
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2292.56 €: 10 mm: B 16 : 220 mm: 250 - 3000 U/min: 0,45 kW: 320 mm: 520 mm: 820 mm: 44 kg: 60 mm: 140 - 315 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 10/12 (in E335/ST60)Robust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationArt. - No. 217.400 with drill head height adjustmentOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The DECKEL-MAHO machining centers are suitable for manual and manual Automatic operation. --> area of application <-- --> MILLING: --> Drilling: --> Face Milling --> Countersinking --> Circular Milling --> Circular Drilling --> Screw Milling --> Screw Drilling --> Hobbing --> Profile drilling --> Profile Milling --> Shape Drilling --> Shape Milling --> incl. vertical tool changer with double gripper --> Tool Magazine, Variable Place Coding (VPC): --> Number of tools: 20 pieces --> Standard tool - Ø max.: 90 mm --> Special tool - Ø for free neighboring spaces max.: 140 mm --> Tool length from spindle nose max.: 300 mm --> Tool weight max. 12 kg Auction-ID: A1-48483-117
3-axis machining center Microcut Challenger 2412 Technologies: Drilling / Threading, Shape Milling (3D), Milling, HSC Milling without vice Table Size: 30\" x 14.3\" Maximum Table Load: 550 LBS X-axis: 24\" Y-axis: 12\" Z-axis: 20.47\" Spindle speed: 8,000 RPM Spindle cone: 40 Spindle motor: 5.5 HP ATC: 16 Auction-ID: A1-48483-2
x-travel: 2165 mmy-travel: 1600 mmz-travel: 1345 mm: 2300 mmTurning Speed of the Rolls: 2300 x 1684 mm: 7000 kgnotching width: 300 1/min: 0,0001 °Positioning speed: 10000 1/min: 37 /30 kW: 150 °Feeds (X,z,u,w-axis): 0,0001 (360°) °: ISO 50 : 42 Control: Mazatrol Smooth X Rapid Travel X / Y / Z-Achse: 42 m/mintotal power requirement: 141 kVAweight of the machine ca.: 51,5 tdimensions of the machine ca.: 4,4 x 5,2 , 7,8 m5-axis multitasking machine featuring:- Mazatrol Smooth X CNC control- Direct-drive table with C-axis accuracy of 0.0001°- Milling spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity diameter: 25.0/30.00mm , Throat depth: 260mm, Drilling stroke: 120mm, Spindle rotation rate: 80-1400 min-1 Auction-ID: A1-48483-43
x-travel — 600 mm y-travel — 450 mm z-travel — 450 mm Spindle speeds — 20–6300 rpm Number of tools — 30 pcs. Tool holder — SK 40 Total power requirement — 17 kW Machine weight — approx. 4 t Dimensions — approx. 3.2 × 3.4 × 2.2 m Auction-ID: A1-48483-118
Hand drill with crank, more precisely a so-called drill crank / breast lyre --> The crank with handle ? for turning by hand --> The round button at the other end ? for pressing (often against the breast or palm) --> The drill chuck at the front ? here the drill is clamped Such devices were used in the past to drill holes without electricity, usually in Wood. By turning the crank, the drill is mechanically set into rotation. Auction-ID: A1-48483-129
2-fold pallet changer, 40 tool positions on chain magazine, max. tool weight 25 kg, nominal current 79 A, incl. 1x KNOLL 270K-1 chip conveyor and 1x KNOLL PF70 belt filter Auction-ID: A1-48193-1
400 € 
