Fabricante:
(Categoria: 101)
HAAS MiniMill CNC Vertical Machining Center (2011) Serial number:1082948 Operating hours (read): approx. 1315 hours Technical data: Travels: X-axis: 406 mm Y-axis: 305 mm Z-axis: 254 mm Table dimensions: 914 x 305 mm max. table load: approx. 227 kg max. spindle speed: 6000 rpm Tool holder: SK40 Tool Changer Positions: 10 Tool not included. Further operating hours may be added. Feel free to take a look at the video about this machine. Auction-ID: A7-47533-7
Table dimensions: approx. 510 x 300 mm, workbench contents may vary Auction-ID: A7-47533-125
max. drilling diameter: 23 mm, drilling depth: 100 mm, projection: 225 mm Auction-ID: A7-47533-128
Table dimensions: approx. 300 x 250 mm, drilling capacity steel: 15 mm, continuous drilling capacity: 13 mm, spindle stroke: 60 mm, projection: 220 mm, speed range: 40 - 4000 rpm, column diameter: approx. 70 mm Auction-ID: A7-47533-230
bore capacity in steel (diameter): 50 mmarm length: 1.600 mmworkpiece height max.: 1.200 mmdistance spindle/base plate: 320 - 1.220 mmspindle taper MT: 5 quill stroke: 315 mmthroat min.: 350 mmthroat max.: 1.600 mmquill feed: 0,04 - 3,20 mm/Udrive capacity - spindle motor: 4,0 kWspindle turning speed range: 25 - 2.000 U/mincolumn diameter: 350 mmvoltage: 400 Vtotal power requirement: 6,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,45 x 1,00 x 2,65 m- Serial-No.: 4045935- Clamping cube 630 x 500 x 500 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAAS MiniMill CNC Vertical Machining Center (2013) Serial number: 1103446 Operating hours (read): approx. 4340 hours Technical data: Travels: X-axis: 406 mm Y-axis: 305 mm Z-axis: 254 mm Table dimensions: 914 x 305 mm max. table load: approx. 227 kg max. spindle speed: 6000 rpm Tool holder: SK40 Tool Changer Positions: 10 Tool not included. Further operating hours may be added. Feel free to take a look at the video about this machine. Auction-ID: A7-47533-37
x-travel: 560 mmy-travel: 510 mmz-travel: 510 mmControl: MSC 502 distance spindle center to table: 50 - 650 mmdistance Spindlenose and center of table: 100 - 610 mmMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 22 / 18,5 kWtool taper: MAS BT-40 spindle bearing diameter: 70 mmpallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mmmax. workpiecediameter: 580 mmmax. workpiece height: 650 mmb - axis: switching time: 90°: 2,5 secchange time of pallets: 6,0 secTool-Presetter:: number of toolpositions: 60 pos.tool taper: MAS BT-40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgchange-time tool to tool: 1,5 secchange-time chip to chip: 3,7 secfeeds:: rapid traverse ( X / Y / Z ): 32 m/minfeed speeds: 1 - 24.000 mm/minTipp feed: 0 - 1.260 mm/mintotal power requirem ...
number of spindle speeds: 18.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The machine has only 13.924 H spindle hours.The machine is in a well-maintained condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HERMLE C 400 V 4-Axis CNC Vertical Machining Center (2016) Serial Number: 24925 Operating hours (read): approx. 11712 hours Spindle hours (read): approx. 3641 hours Control: HEIDENHAIN TNC 640 Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Rapid traverse: 35 m/min. Feed rate: 7000 N Table dimensions: approx. 1070 x 700 mm Max. table load: approx. 600 kg Max. spindle speed: 15000 rpm Tool holder: SK40 Tool Changer Positions: 38 Without clamping plate, tools and machine vice. Further operating hours may be added. Feel free to take a look at the video about this machine. Auction-ID: A7-47533-100
x-travel: 1050 mmy-travel: 570 mmz-travel: 510 mmControl: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1power capacity - main spindel: 16,5 / 11 kWmax. Torque: 141 Nmtool taper: BT 40 distance spindle /table: 150 - 775 mmwork table:: table surface area: 1300 x 570 mmmax. table load: 1000 kgtool magazin:: number of toolpositions: 40 pos.tool taper: BT 40 max. tool diameter: 80 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,2 secchange-time chip to chip: 3,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/minworkpiece height max.: 590 mmtotal power requirement: 40,9 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,5 x 3,1 x 2,98 m3-axis vertical CNC machining center- Siemens 828D CNC control and workshop-oriented programming supportShop Mill- 40-tool tool changer (BT 40)- Basic cooling system / spin ...
x-travel: 200 mmy-travel: 200 mmz-travel: 280 mmControl: HEIDENHAIN iTNC 530 table - swivable +/-: -10 / +130 °-C-axis table rotating: 360° milling head: 42000 rpm tool piece magazine with: 60 Werkzeugplätzen weight of the machine ca.: 5 tdimensions of the machine ca.: 2 x 2 x 2.4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 860 mmy-travel: 560 mmz-travel: 600 mmtable-size: 1000x560 mmspindle turning speed range: 10000 U/mintool magazin:: 24 weight of the machine ca.: 6.5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-axis: 1250 mmW-axis (spindle longitudinal): 800 mm: ISO 50 P.D.B : 1800x2500 mm: 12 t: 3000 Hertz: 400 total power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mATC 40 positionsSafety guardingCoolantThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulM ...
surface area: 1168 x 508 mmmax. table load: 1800 kgtravel -x axis: 1016 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle taper: SK40 spindle speed: 10000 U/minspindle capacity: 15 kWspindle torque max.: 99 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 20 kWweight of the machine ca.: 4,15 tdimensions of the machine ca.: 3,7 x 3,3 x 2,5 mThe machine is like new !, only 61 spindle hoursTool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
surface area: 1321 x 610 mmmax. table load: 1800 kgtravel -x axis: 1270 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle cone: SK40 number of spindle speeds: 12000 U/minspindle capacity: 15 kWspindle torque max.: 82 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 21 kWweight of the machine ca.: 4,25 tdimensions of the machine ca.: 4,1 x 3,35 x 2,6 mthe machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 (875) mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC 430 turning speeds: 20-7.000 U/minfeed: 0-15.000 mm/mintool change unit: 16-fach rapid power traverse in X-and Z direction: 15 m/mintool taper: SK 40 table surface area: 900 x 528 mmmax. table load: 400 kgspindle diameter in front bearing: 55 mmswivellable: 0-90 °quill stroke: 75 mmspindle hours: 9.546 htotal power requirement: 12/7,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 4 x 3,6 x 2,2 mHERMLE U 630T 3-axis machining centre, built in 1999The X-axis, with a stroke of 630 mm, can be extended to 875 mmby swivelling the tool changer out of the way.Accessories:Tool holders, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindle speeds: 10.000 U/mincontrol: HEIDENHAIN - iTNC 530 number of spindle speeds: 10.000 U/minnumbers of positions in the tool changer: 32 tool taper: SK 40 NC rotary indexing table Ø: 630 mm5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours.The machine is in a well-maintained condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 75 mmx-travel: 700 mmy-travel: 800 mmZ-axis (spindle headbox - vertical): 700 mmW-axis (spindle longitudinal): 700 mmtable surface area: 700 x 800 mmtable load: 1500 Kgspindle speed:: 17 - 1700 U/mintool taper: MK 5 total power requirement: kWweight of the machine ca.: 6,0 tdimensions: 3,6 x 2,0 x 2,45 mTable-type Boring Mill- Digital readout- Morse taper tooling- Coolant system- Telescopic covers- Machine lamp- Operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 140 mmx-travel: 2000 mmy-travel: 2000 mmz-axis: 1500 mmspindle stroke - max.: 800 mmspindle taper ISO: 50 table surface area: 1800 x 1500 mmtable load: 15000 kgturning speed range: 2,3 - 810 U/mintotal power requirement: ca. 30 kWweight of the machine ca.: 31000 kgdimensions of the machine ca.: 7300 x 5600 x 4000 mmEquipment:- Faceplate with NC facing slide and NC rotary table- Heidenhain digital readout- Various tool holders- Various clamping devicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 1000 x 600 mmspindle taper: HSK 63 A spindle turning speed - stepless: 18.000 U/minfeeds x/y/z -stepless: 0 - 30.000 mm/minrapid traverse: 30 m/minno. of tools in magazin: 2 x 12 workpiece diameter at full load: 130 mmtool length - max.: 315 mmweight of tools max.: 8 kginternal coolant system feed: 40 barcontrol: HEIDENHAIN control: MillPlus iT table load capacity: max. 500 kgtotal power requirement: 52 kVAweight of the machine ca.: 6,5 tdimensions of machine L x W x H: 3,40 x 1,86 x 2,42 mAccessories: probe HEIDENHAIN, TS 640, electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mmy-travel: 2500 mmz-travel: 1500 mmbore diameter: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy.The data for this ad was created ...
x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmcontrol: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 8300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1250 mmy-travel: 850 mmz-travel: 800 mmControl: Heidenhain MillPlus total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmCNC-control: iTNC530 HEIDENHAINtable-size: 1000 x 560 mmmax. table load: 800 kgspindle taper: SK 40 spindle turning speed range: 20 - 14.000 U/minfeed stepless: 1 - 20.000 mm/minrapid traverse: 20 m/mindrive capacity - spindle motor: 13 / 9 kWtool change unit: 32 Poscoolant: IKZ 25 barvoltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,50 x 3,50 x 2,70 mchip conveyor: 3,55 x 0,90 x 1,55 mcoolant equipment: 1,60 x 1,35 x 1,80 mspindle oil cooler: 0,40 x 0,50 x 1,00 mTransformer: 0,75 x 0,45 x 0,65 m- Serial-No.: 15415041384- Machine ON: 72,882 h- Program Run: 25.267 h- Linear scales in all 3 axis- electr. handwheel- Tool changer 30 pos. with double gripper- Chip conveyor- TSC with belt filter system- Coolant unit- new ball screw incl. bearings (X-Axis)- motor spindel changed by previ ...
x-travel: 1120 mmy-travel: 510 mmz-travel: 510 mmcontrol: Mazatrol M Plus spindle turning speed range: 0-7000 U/mintool taper: Cat 40 tool piece magazine with: 24 Plätzenmax. table load: 500 kgtable dimensions (lengthxwidth): 1460 x 510 mmOverall size: 3600x2700x2590 mmmachine weight ab.: 5850 kgEquipment/Accessories:- 4 vices- 1 chuck- 18 tool holders with tools- Transport locks- USB flash drive with data backup- Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 65 mmarm length: 1600 mmworkpiece height max.: 1600 mmsurface area: 1800x800 mmturning speeds: 18-1800 U/minFeed: -2,54 mm/UThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 100-1000 barliter capacity: 10 lmotor speeds:: 975 total power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
7.500 € 
