Brocas especiais (66)

Works flawlessly With large and small machine vise with threading devices With foot pedal With lighting With attacks Loading 100 EUR Auction-ID: A1-46501-2042

Tap capacity M.30 Drive gears (hardened and ground) Automatic power supply Number of power supplies 3 x 0.10-0.20-0.30 Clutch electromagnetic Main engine power 2 HP 380 Volt Material clamp automatic manual operation System air pressure 8 bar Spindle column distance 300 mm Table size 520 x 390 mm Cooling device with lubrication system. Drill ejector . Light installation. Drill protection with microswitch. MPS automatic feed table: Type MPS system 4010 Roll feed table l x w 3000 x 360 mm Complete with control cabinet with digital readout Auction-ID: A1-41995-161

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-46460-404

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machine for M3 - M16 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-46460-520

Fast radials with - Tapping device - Table vertical 750 x 620mm - Horizontal table 1200 x 510mm - Emergency stop facility - Documentation Machine No. 445 Drilling capacity in steel 32 mm Projection 950 mm Speed range 51 - 1000 rpm Speed levels 12 Drill spindle Morse taper MK 4 Quill stroke 160 mm Feed range 0.075 x 0.3 mm/min Table surface 1200 x 510 mm Total power requirement 2 kW Machine weight approx. 1.9 t Space requirement approx. 1.8 x 1.2 x 2.25 m Auction-ID: A7-46460-423

Unused exhibition machine with: - Tapping device - Variable spindle speed - Coolant system Drilling capacity in steel 32 mm Projection 265 mm Drilling stroke 150 mm Recording MK 3 MK Table size 390 x 390 mm Speed 100 - 3300 rpm Total power requirement 1.5 KW Machine weight approx. 0.35 t Dimensions L x W x H 0.8 x 0.6 x 1.95 m Auction-ID: A7-46460-436

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-495

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right Switch Head swivel left/right 90° Spindle protection. incl. toolbox with various tools Drilling capacity in steel25 mm Projection 175 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle holder ISO 30 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 380 mm Table adjustment longitudinal 175 mm Table clamping area 700 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-46460-458

Column drill with: ARBO/CE approved protective cover. Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5) Auction-ID: A7-46460-473

Column drill with: automatic feed Tapping function. Digital depth display Coolant system 2 Stage Motor Spindle protection Swivel table Swivel drill head LED lighting Drilling capacity in steel 40 mm Projection 300 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 500 x 460 mm Column diameter 115 mm Speed 75- 3200 rpm Feeds 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.5 kW Condition: never used / new (5) Auction-ID: A7-46460-494

Column drill with: Tapping function. Digital depth display Coolant system 2 Stage Motor Spindle protection Swivel table Swivel drill head LED lighting Packaging Dimensions: 730 x 760 x 188mm Weight 340Kg Drilling capacity in steel 40 mm Projection 300 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 500 x 460 mm Column diameter 115 mm Speed 75- 3200 rpm Feeds 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions L-W-H 2.2 x 0.8 x 0.7 mm Condition: never used / new (5) Auction-ID: A7-46460-430

Drilling capacity in steel 25 mm Projection 220 mm Drilling stroke 110 mm Recording MK 3 MK Table size 350 round mm Feeds mm/U Speed 100 - 2080 rpm Connection voltage 400 V Total power requirement 0.9 KW Machine weight approx. 0.2 t Dimensions L x W x H 0.8 x 0.6 x 1.9 m Auction-ID: A7-46460-437

Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-46460-414

Column drill with: - Variable spindle speed - Digital display for speed - Digital display for drilling depth - Left/right rotation - Incl. vice Drilling capacity in steel 30 mm Projection 275 mm Drilling stroke 100 mm Mounting MK 4 MK Table size 420 x 340 mm Speed 80 - 2000 rpm Total power requirement 0.9 / 1.45 KW Machine weight approx. 0.22 t Dimensions L x W x H 0.85 x 0.6 x 1.9 m Auction-ID: A7-46460-593

Equipment: Drill chuck with ISO-30 mount Digital depth display Left/right switch. Emergency stop Swivelling drill head Spindle protection. Feed via handwheel. Small tool case Machine base optional. Drilling capacity in steel 45mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 30 Spindle speeds 75 - 1600 rpm max. cutter diameter 80 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm max. distance between work table and spindle nose 460 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 320 kg Space requirements approx. 1.0 x 0.8 x 1.45 m Auction-ID: A7-46460-476

Auction-ID: A1-46480-3045

Tapping machine Thread diameter 3 - 10 mm Speed tool 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Condition: unchecked (6) Auction-ID: A7-46460-517

Column drill with: - Feed via handwheel - Spindle speeds via belt drive Drilling capacity in steel 32 mm Projection 300 mm Drilling stroke 140 mm Recording MK 3 Table size 380 x 360 mm Feeds via handwheel Speed 85 - 1100 rpm Total power requirement 1.3 KW Machine weight approx. 0.27 t Dimensions L x W x H 0.95 x 0.6 x 1.92 m Auction-ID: A7-46460-590

Drilling capacity in steel 40 mm Projection 230 mm Drilling stroke 130 mm Mounting MK 4 MK Table size 400 x 315 mm Speed 105 - 1257 rpm Total power requirement 2.55 KW Machine weight approx. 0.32 t Dimensions L x W x H 0.8 x 0.6 x 1.95 m Auction-ID: A7-46460-513

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5) Auction-ID: A7-46460-501

Quick radials with: - Feed - Tapping device Drilling capacity in steel 32 mm Projection 1230 mm Table surface 1200 x 500 mm Drilling stroke 180 mm Feed - automatic 0.10 - 0.15 - 0.20 mm Speed 60 - 1800 rpm Recording MK 4 Total power requirement 2.7 kW Machine weight approx. 1.8 t Dimensions approx. 2.2 x 1.8 x 2.3 m Auction-ID: A7-46460-455

Radial drilling machine - Clamping cube 750 x 500 x 500mm - Digital display for boom travel - Coolant system - Good condition Drilling capacity in steel 40 mm Projection 1600 mm Drilling capacity in cast iron 60 mm Spindle diameter 85 mm Quill stroke 350 mm Tool holder MK 5 Speeds 24 - 1050 rpm Feeds 0.06 - 1.0 mm/rev Column diameter 345 mm Threading device yes Drilling motor 5.5 kw Total power requirement 7.5 kW Machine weight approx. 4000 kg Dimensions approx. 2.5 x 1.0 x 2.99 m Auction-ID: A7-46460-599

Electric tapping machines for M3 - M16 threads. Incl. connection for cutting oil supply Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Optional: Clamping table with grooves Type: FL-WB Thread diameter M3 - M16 metric Speed infinitely variable 300 rpm. Working range max. 1100 mm Motor power 0.6 kW Weight 30 kg Dimensions L x W x H 700 x 600 x 200 mm Condition: never used / new (5) Auction-ID: A7-46460-595

Column drill with: - Feed - Variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 325 mm Drilling stroke 170 mm Mounting MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 2.9 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 m Auction-ID: A7-46460-600

Column drill with: - Feed - Variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 325 mm Drilling stroke 170 mm Mounting MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 2.9 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 m Auction-ID: A7-46460-622

Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-525

Brand: Quantum Maschinen Type: B30 GS Machine: Drill press Drive: gear driven Power: 550 / 750 W Voltage: 400V (3-phase) Speed: 100 – 1450 rpm (multiple positions) Auction-ID: A3-43525-11845

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-46460-435

Drilling machine with: Feed 2 gears Left/right rotation Footswitch Coolant Pump Machine Light Drilling capacity in steel 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - mm/rev Tool holder MK 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Condition: unchecked (6) Auction-ID: A7-46460-507

Radial drilling machine - Clamping cube 800 x 600 x 500mm - Coolant system - Good condition Drilling capacity in steel 50 mm Projection 1250 mm Drilling capacity in cast iron 60 mm Quill stroke 300 mm Tool holder MK 5 Speeds: 25 - 1440 rpm Feeds 0.08 to 0.58 mm/rev Threading device yes Drilling motor 4.0 kw Machine weight approx. 2.4 t Space requirement approx. 2.0 x 0.75 x 2.15 m Auction-ID: A7-46460-418

Column drill with: automatic feed Tapping function. Digital depth display 2 Stage Motor Spindle protection Swivel table LED lighting Coolant system Drilling capacity in steel 40 mm Projection 350 mm Drilling stroke 180 mm Spindle mount MK 4 MK Table: 560 x 560 mm Column diameter 140 mm Speed 50 - 1450 rpm Feeds 0.1 - 0.2 mm/rev Total power requirement 1.5 kW Machine weight approx. 580 kg Condition: never used / new (5) Auction-ID: A7-46460-487

Drilling and milling machine with - Variable spindle speed - Cross support - Rotatable spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm Projection 185 mm Drilling stroke 50 mm Capacity finger tiller 20 mm Spindle Holder MK 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment transverse 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-504

Column drill with - Right-left run - Threading - Coolant - Emergency stop Drilling capacity in steel 50 mm Projection 300 mm Drilling stroke 250 mm Spindle diameter 60 mm Spindle mount MK 5 Spindle speeds 18 - 1400 rpm Number of speeds: 12 levels Feeds 0.1 - 1.6 mm/rev Number of feeds 9 stages Table clamping area 500 x 500 mm Spindle motor 4 kW Total power requirement 4.2 kW Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.8 x 2.55 m Auction-ID: A7-46460-471

Gear Drilling Machine Tapping device Left / Right Run Tilt work table. Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging Dimensions: 2100 x 400 x 710mm Weight 260Kg Drilling capacity in steel 30 mm Projection 250 mm Drilling stroke 130 mm Spindle mount MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Feeds mm/U Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5) Auction-ID: A7-46460-425

Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads with: - Stable and flexible working arm. - 6 quick-change chuck with slipper clutch. Documentation in English Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm. Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-46460-410

According to photos, weight estimated Auction-ID: A1-45666-11

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-59

TNW Super Condor type 40 pillar drilling machine ; automatic version suitable for precise drilling work ; Voltage: 380 volts ; Speed: 60–1350 rpm ; Recording: MK-4 ; Extension: 350 mm ; Table size: 480 x 410 mm Auction-ID: A1-45170-24

MECOF 40 C radial drilling machine ; compact design with cube and clamp ; suitable for heavy and precise drilling work ; Voltage: 380 volts ; 2-speed motor L+R ; Recording: MK-4 ; Automatic feed: yes ; Speed: 35–1460 rpm ; Extension: 1380 mm ; Dimensions: 2000 x 800 x 2250 mm ; Weight approx. 2000 kg Auction-ID: A1-45170-16

ERLO TS-32 column drilling machine ; gear-driven version; suitable for precise and powerful drilling work ; Voltage: 380 volts ; Speed: 75–2100 rpm ; 2-speed motor: yes ; Recording: MK-4 ; Extension: 300 mm ; Table size: 400 x 400 mm Auction-ID: A1-45170-18

Auction-ID: A7-46309-46

Auction-ID: A7-46309-27

Auction-ID: A7-46309-79

Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17023

Machine number: 189368with a total of 6 drilling spindlesTable dimensions: 340 x 300 mmwith two grooves Auction-ID: A7-46287-133

with two drilling units with 4 drilling spindles each Auction-ID: A7-46287-149

Equipped with: adjustable drilling table Auction-ID: A1-45979-119

Equipped with: T-slot clamping table Auction-ID: A1-45979-103

Includes: (1x) wooden stand with drills in various types and sizes. Auction-ID: A1-45979-102

Tables can be adjusted at an angle. Auction-ID: A1-45979-146