Fabricante:
(Categoria: 101)
bore capacity in steel (diameter): 16 mmthroat: 285 mmbore stroke: 150 mmtable surface area: 400 x 430 mmspindle taper MT: 2 spindle turning speed range: 150 - 3.000 U/minvoltage: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 260 kgdimensions of the machine ca.: 0,40 x 1,00 x 1,70 m- Serialä-No.: 749-160-582- Stepless speed control- Quick-release drill chuck, Ø 3–16 mm- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture: 2018 Serial Number: 5000095 Auction-ID: A1-49793-1104
Connection: 230V Year of Make: 2022 Serial Number: 2022 3410039 Auction-ID: A1-49793-2629
Serial number: 416158Travel X-axis: 1200 mmTravel Y-axis: 900 mmTravel Z-axis: 250 mmZ-passage: 200 mmT-slot clamping table: 1250 x 1000 mmSpeed: max. 20,000 rpmTable dimensions: approx. 1250 x 1000 mmfor further technical data see pictureswith documentationwith accessoriesImportant note: the tool changer is not installed !Reference: Wup - Lot 16 Auction-ID: A7-49882-297
x-travel: 800 mmy-travel: 950 mmz-travel: 1020 mmControl: SIN840D sl B - axis: 360 x 0,001 °A - axis: -180 / +45 x 0,001 °feed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 35,00 KWmax. torque at 40% / 100% load: 223 / 160 Nmspindle diameter in front bearing: 80 mmtool taper: HSK-A63 tool magazin:: 50 tool length - max.: 400 / 465 mmtool diameter: 72 mmtool diameter with 2 vacant positions: 160 mmtool total weight: 8,00 kgsize of pallet: 630x630 mmworkpiece weight: 700 kginterference diameter: 900 mmtotal power requirement: 50,00 kWweight of the machine ca.: 26,00 tdimensions of the machine ca.: 7,00 x 4,50 x H3,50 m5-axis machining center withSIEMENS Sinumerik 840D SL control,integrated ...
: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drilling capacity diameter min.: 3 mmdrilling capacity diameter max.: 25 mmbore depth: 660 mmtable surface area: 700 x 500 mmtable rotating: manuell, 360 °spindle taper: SK 40 spindle speed:: 100 - 6.000 U/minspindle motor: 4 kWtravel -x axis: 600 mmtravel -y axis: 400 mmtravel -z axis: 1.000 mmtravel -w axis: 400 mmthreading: M 20 internal coolant system feed: 60 barcontrol: SIEMENS control: SINUMERIK 802 D total power requirement: 10 kVAweight of the machine ca.: 4 tdimensions of machine L x W x H: 2,80 x 2,20 x 2,10 m- with internal coolant 60 bar -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-49882-157
Connection: 230V Serial Number: 0900047 Year of Make: 2019 Auction-ID: A1-49793-2870
Serial number: 498-56Important note: A new spindle has recently been installedTravel paths: X: 800 mm Y: 500+50 mm Z: 550 mmSpindle speed: 12000 rpmTool holder: SK 40Number of tool positions: 40Control: SIEMENS SINUMERIK 840 Dincl. chip conveyor from KNOLL, paper belt filter system from KNOLL, zero-point clamping system from SCHUNK Type: SDE 138Table dimensions: 850 x 350 mmincl. the tool holders and tools on the tool changerincl. touch probe as shown in the pictures Atruck with a width of 3000 mm is required for transportReference: Wittner - Lot 11 Auction-ID: A7-49882-412
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 k Travel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y-axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D Probe Reference: Schönichen - Lot 25 Auction-ID: A7-49882-158
Connection: 230V Year of Make: 2020 Serial Number: 1300069 Auction-ID: A1-49793-265
Machine number: 13088094Operating voltage: 380 VFrequency: 50 HzDrilling depth: up to 120 mmControl: HEIDENHAIN TNC 155Table clamping surface: 780 x 230 mmSpindle speed infinitely adjustable: from 50 to 9000 rpmDrive power of the spindle motor: 3.7 kWDrilling capacity in steel: 20 mmDrilling distance of the drill head: 450 mmTravel X-axis: 420 mmTravel Y-axis: 240 mmTravel Z-axis: 120 mmTravel A-axis: +- 30000°Rapid traverse X-axis: 7 m/minFeed X-axis: 7000 mm/minRapid traverse Y-axis: 7 m/minFeed Y-axis: 1 - 7000 mm/minFeed Z-axis: 0.02 - 0.30 mm/revRapid traverse A-axis: 10800°/minFeed: 1 - 10800°/minincl. built-in workshop drawer cabinet with contents of various hand tools, milling cutters, matching tool holders, colletsAttention: the machine is expressly sold as untested!Reference: C.O. - Lot 23 Auction-ID: A7-49882-292
Projection: approx. 700 mm Table dimensions: approx. 780 x 655 mm Speed range: 125 - 710 rpm Internal reference: previously lot 51 Auction-ID: A7-49882-263
Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 660 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance from table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vice shown in the photos! incl. the tool holders located in the tool changer as well as touch probe and 4th axisReference: Schönichen - ...
Connection: 230V Year of Make: 2020 Serial Number: 1600034 Auction-ID: A1-49793-2678
Machine is already in storage Including: Clamping tools Kawasaki charging and unloading robot RS 20N dim. 1200 x 800 x 1500 mm. Work table dimensions. 2000 x 800 x 900 mm. Auction-ID: A1-47360-51
Radial drilling machine - Clamping cube 750 x 750 x 500mm - Coolant system - Emergency stop facility Drilling capacity in steel 50 mm Projection 1100 mm Quill stroke 300 mm Tool holder MK 5 Speeds: 22 - 1000 rpm Feeds yes Drilling motor 4.5 kw Total power requirement 7.0 kW Machine weight approx. 3200 kg Dimensions approx. 2.1 x 0.9 x 2.85 m Auction-ID: A7-49782-656
Drilling and milling machine with - Variable spindle speed - Cross support - Rotatable spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm Projection 185 mm Drilling stroke 50 mm Capacity finger tiller 20 mm Spindle Holder MK 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment transverse 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 m Condition: never used / new (5) Auction-ID: A7-49782-504
Drilling and milling machine - Digital display - Left/right rotation - 2 electr. Speed levels - Drilling spindle with autom. Feed and manual feed - With machine base Drilling capacity in steel 40 mm Projection 250 mm Drilling stroke 125 mm Spindle Holder MK 4 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 550 mm Table adjustment longitudinal 230 mm Table clamping area 820 x 240 mm Connection voltage 400 V Total power requirement 0.8 kW Machine weight approx. 0.7 t Space requirement approx. 1.2 x 1.0 x 1.85 m Auction-ID: A7-49782-657
Column drill with: automatic feed Tapping function. Digital depth display 2 Stage Motor Spindle protection Swivel table LED lighting Coolant system Drilling capacity in steel 40 mm Projection 350 mm Drilling stroke 180 mm Spindle mount MK 4 MK Table: 560 x 560 mm Column diameter 140 mm Speed 50 - 1450 rpm Feeds 0.1 - 0.2 mm/rev Total power requirement 1.5 kW Machine weight approx. 580 kg Condition: never used / new (5) Auction-ID: A7-49782-487
X shaft 700 mm Y shaft 315 mm Z shaft pinole controlled 172 mm Z shaft manual pinole 180 mm W shaft ( Machine head ) 495 mm 4th axle 360 x 0,001 gr with against center. Table size 1230 x 410 Spindle holder SK 30 / DIN 69871A Includes tool drawer Auction-ID: A1-47360-148
Drilling capacity in steel 25 mm Projection 220 mm Drilling stroke 110 mm Recording MK 3 MK Table size 350 round mm Feeds mm/U Speed 100 - 2080 rpm Connection voltage 400 V Total power requirement 0.9 KW Machine weight approx. 0.2 t Dimensions L x W x H 0.8 x 0.6 x 1.9 m Auction-ID: A7-49782-437
column 90 mm, Height column drilling machine 1750 mm. Drill chuck 16 mm with key. 2 different speeds by rerouting the V-belts. With machine clamp Auction-ID: A1-48994-37
Pneumatic Tapping Machine version with an adjustable angle, Horizontal tapping possible Tapping machines for M3 - M12 threads, Angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-435
Pneumatic Tapping Machine version with an adjustable angle, Horizontal tapping possible Tapping machine for M3 - M16 threads, Angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-520
Bench Drill - Left/right rotation - Vorschib - Base frame Drilling capacity in steel 23 mm Projection 310 mm Drilling stroke 150 mm Speed 90 - 2000 rpm Table 420 x 360 mm Machine weight approx. 650 kg Dimensions L x W x H 1.2 x 0.8 x 2.4 mm Condition: unchecked (6) Auction-ID: A7-49782-511
5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-38
25 € 
