Fabricante:
(Categoria: 101)
machine ready for transport and to be assessed on viewing day Auction-ID: A1-48648-6
Hours: 42209 Robot included Machine already ready for transport, to be assessed on viewing day. Complete curtain-sided trailer required for machine transport Auction-ID: A1-48648-1
ATC Tool changer 51 positions, Double table 1100 x 600 x 150 mm, Feed rates 30.000 mm/Min, Spil table 190 to 690 mm, the tooling in the ATC are not part off the delivery machine ready for transport and to be assessed on viewing day. Auction-ID: A1-48648-91
DECKEL MAHO - DMU 125 T Machine is delivered with new discs. Offer details Stock number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of construction 1998 Control TNC 426 Heidenhain Country of origin Germany Additional information CNC - Vertical machining center DECKEL MAHO - DMU 125 T - IKZ Technical details x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 426 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool locations 30 pos. max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 160 mm max. tool length 315 mm max. tool weig ...
x-travel: 1660 mmy-travel: 510 mmz-travel: 510 mmControl: M+ Mazatrol Table dimensions: 2000x510 mmtable load: max. 1.000 kgnumber of spindle speeds: 7.000 UpMtool taper: SK 40 tool piece magazine with: 48 Stückweight of the machine ca.: 7.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REIDEN - BFR 22 Offer details Stock number 1039-9086 Machine Type Machining Center - Universal Manufacturer REIDEN Type BFR 22 Year of construction 2003 Control TNC 430 Heidenhain Country of origin Switzerland Additional Information 4-Axis Machining Center - Universal REIDEN - BFR 22 - Incl. 2x tool cabinets for recordings - incl. 3x pull-out cabinets - incl. 1x workbench - Incl. Ringler chip vacuum cleaner Technical details x-travel 2,000 mm y-travel 1,000 mm z-travel 1,200 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle 20 - 5,000 rpm/-1 Gear stages 2 Drive power - main spindle 30 (100%) / 45 (40%) kW Torque 1,050 / 1,580 Nm Tool holder HSK 100 Swivel B: +/- 180° Pitch B: 0.001° Work table: Table clamping area 1,000 x 2,000 mm max. table load 4,000 kg Groove spacing 100 mm T-slots 18 H7 Number of T-slots 10 Tool magazine: Number of tool positions 40 ...
DECKEL MAHO - DMU 50 T Offer details Stock number 1039-9277 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 50 T Year of construction 1998 Control TNC 426M Heidenhain Storage location D-59302 Oelde Country of origin Germany Delivery time by arrangement Freight base from location Additional information CNC - Machining Center Universal DECKEL MAHO - DMU 50 T - 5 axles (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Technical details x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain Main spindle: Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Max. torque 57 / 82 Nm Tool holder ISO 40 DIN 69871 Swivel rotary table: Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of T-slots 7 T-slots - spaci ...
OPTIMUM - OPTImill F 105 CNC Offer details Stock number 1039-8705 Machine Type Machining Center - Vertical Manufacturer: OPTIMUM Type OPTImill F 105 CNC Year of construction 2019 Control Sinumerik 808D adv. Siemens Additional Information CNC Machining Center Vertical OPTIMUM - OPTImill F 105 CNC - DEMONSTRATION MACHINE Technical details x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle 10 - 10,000 rpm Drive power - main spindle 11 / 7.5 kW Max. torque 70 / 48 Nm Tool holder BT 40 Work table: Table clamping area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm Distance spindle / table 100 - 600 mm Tool Changer: Number of tool positions 12 pos. Tool holder BT 40 max. tool diameter 70 mm max. tool weight 6.0 kg Tool-tool changeover time 7.0 sec Feeds: Rapid traverse ( X / Y / Z ) 10 m/min Feed ...
DECKEL MAHO - DMU 80 T Offer details Stock number 1039-9228 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 T Year of construction 2002 Control iTNC 530 Heidenhain Country of origin Germany Additional information CNC - Machining Center Universal DECKEL MAHO - DMU 80 T - 5-axis - Rotary table in rigid table Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle 20 - 10,000 rpm/-1 Drive power - main spindle 13 kW Torque 130 Nm Tool holder BT 40 Work table: Table clamping area 1,250 x 700 mm max. table load approx. 500 kg Table diameter 700 mm T-slots 11x 14 x 63 mm Max. table speed 15 min/-1 Tool magazine: Number of tool positions 32 (2x 16) pos. Tool holder BT 40 max. tool diameter 80 / 130 mm max. tool diameter. with a free neighboring box. 160 mm max. tool lengt ...
DECKEL MAHO - DMU 80 monoBLOCK 3233 Offer details Stock number 1039-9302 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 monoBLOCK 3233 Year of manufacture 2007 Control iTNC 530 Heidenhain Country of origin Germany Additional information 5 Axis CNC Machining Center Universal DECKEL MAHO - DMU 80 monoBLOCK - NC rotary table (C-axis) integrated into rigid table - Swivel milling head (B-axis) Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle max. 18,000 rpm/-1 Drive power - main spindle 28 / 19 kW Max. torque 121 Nm Tool holder HSK-A 63 Swivel B: +30° / -120° NC rotary table: Table clamping surface Ø 700 / 1,250 x 700 mm max. table load 650 kg Rotatable C: 360° Tool magazine: Number of tool stations 2x16 pos. Tool holder HSK-A 63 max. tool diameter 80 mm max. t ...
DECKEL MAHO - DMU 80 monoBLOCK 1213 Offer details Stock number 1039-9301 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 monoBLOCK 1213 Year of construction 2006 Control iTNC 530 Heidenhain Additional information 5 Axis CNC Machining Center Universal DECKEL MAHO - DMU 80 monoBLOCK - NC rotary table (C-axis) integrated into rigid table - Swivel milling head (B-axis) Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle max. 18,000 rpm/-1 Drive power - main spindle 28 / 19 kW Max. torque 121 Nm Tool holder HSK-A 63 Swivel B: +30° / -120° NC rotary table: Table clamping surface Ø 700 / 1,250 x 700 mm max. table load 650 kg Rotatable C: 360° Tool magazine: Number of tool stations 2x16 pos. Tool holder HSK-A 63 max. tool diameter 80 mm max. tool diameter. with a free ...
column diameter 72 mm, including drill chuck, pin, ejector, work light, digital depth stop, delivered in original packaging Auction-ID: A1-48552-166
Technical details Type: Radial drilling machine Configuration: - Heavy-duty radial arm - Rotating column - Vertically adjustable drilling head - Manual and power spindle feed - Large T-slotted box table - T-slotted base table - Mechanical feed gearbox - Coolant and lubrication system - Electrical control panel Application: - Drilling - Boring - Tapping - Reaming - Countersinking - Machining of large workpieces Construction: - Heavy-duty cast-iron machine frame - Conventional mechanical operation - Industrial radial drilling machine Dimensions: - Length: Approx. 3200 mm - Width: Approx. 1400 mm - Height: Approx. 3400 mm Weight: Approx. 7000 kg Condition: Used Observed condition: - Machine appears substantially complete - Radial arm and drilling head installed - Large T-slotted worktable and base table present - Mechanical controls intact - Cosmetic wear and surface oxidation visible - Ope ...
x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain iTNC 530 table surface area: 1250 x 600 mmtable load: 600 kgtool taper: SK 40 spindle turning speed range: 1 - 8000 U/minmax. torque on the spindle: (S1/S6) 140/200 Nmfeed range: 40000 mm/minrapid power traverse in X-and Z direction: 70 m/minrapid motion - y-axis: 40 m/minspindle drive: (100/40 % ED) 13/19 kWtotal power requirement: 39 kVAweight of the machine ca.: 8,9 tdimensions of the machine ca.: mOperating hours 70294Spindle hours 23335Please note the enclosed geometry measurement report with the tool pull-in force measurement.Equipment:CNC control Heidenhain iTNC 530Electronic handwheel Heidenhain HR 410Motor spindle with increased torqueDirect path measuring system in Y-Z axisPreparation for measuring probe30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kgROTOCLEARProduction package 2Inte ...
Digital depth stop, Laser function, LED work light, Chuck 20 mm, Drill pin, Extension pin, Protective cap (CE), Emergency stop (CE), Supplied in original box Auction-ID: A1-48552-140
equipped with SCHNEIDER electricity, tap function, digital depth stop, LED work light, CE plug, tool holder MK4-B16, drill chuck 1-13 mm, reducing sleeve MK4-3 and MK3-2, expulsion pin, 2 pieces T-bolts M10x55, manual with complete parts list, delivered in original packaging Auction-ID: A1-48552-83
bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 45 - 1370 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Taps up to M10, including tap set, Röhm drill head, SCHOTT KL1500 cold light source Auction-ID: A1-48552-111
digital depth stop, CE protective cover, laser function, led lighting, drill chuck, delivered in original packaging Auction-ID: A1-48552-70
automatic spindle feed, tapping function, drilling table motorized in height, digital depth stop, LED lighting, CE plug, tool holder MK4-B16, drill chuck, reducing sleeve MK4-3 and MK3-2, mechanical drill ejector, manual with parts list Auction-ID: A1-48552-123
equipped with MK2 drill chuck with keyless drill chuck 0.2-16 mm, tool ejector, work light Auction-ID: A1-48552-45
equipped with SCHNEIDER electricity, tap capacity M12, max. Distance spindle nose/drilling table 810 mm, max. distance spindle nose/foot 1210 mm, foot 535 × 360 mm, column diameter Ø 100 mm, equipped with tap function, CE protective cover, LED lighting, drill chuck, drill chuck holder, reducing sleeve 3/2, drill ejector, CE plug, anchoring bolts, toolbox, manual, delivered in original packaging Auction-ID: A1-48552-172
Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mmturning speeds: 1000 - 6100 U/minbore slide stroke: 850 mmbore depth: 550 mmspindle distance: 240 mmdimensions: ca. 6 5 2,3 mShipping weight: ca. 6000 kgPacking: ca. 10 Lademeter m: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mmx-travel: 8000 mmy-travel: 4000 mmz-travel: (RAM) 1000 mmW-axis (spindle longitudinal): 800 mmControl: Heidenhain iTNC 530 tool taper: ISO 50 DIN 69871spindle turning speed range: 5 - 2500 U/minspindle drive motor: 40 kWmax. torque on the spindle: 2024 Nmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWorking hours (February 2026):- Machine on: 27.315 h- Autom. cycle: 11.533 h CNC-control HEIDENHAIN iTNC 530 30-pos. ATC Floor plates 8000 x 4000 mm Coolant equipment with coolant through spindle Swarf conveyor Angular milling head with adapter movable operators platform DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mmx-travel: 3000 mmy-travel: 2000 mmz-travel: 1500 mmW-axis (spindle longitudinal): 600 mmtable-size: 1250 x 1600 mmtable load capacity - central/maximum: 5000 kgControl: Heidenhain iTNC 530 tool taper: ISO 50 spindle turning speed range: 5 - 3000 U/minspindle drive motor: 37 kWmax. torque on the spindle: 1646 Nmtransmission ratio: 2 total power requirement: kWweight of the machine ca.: 23 tdimensions of the machine ca.: 6830 x 6615 x 7200 mmWorking hours:- Machine on: 59.078 h- Autom. cycle: 24.207 h CNC-control HEIDENHAIN iTNC 530 Coolant equipment Table B-axis, 360.000 positionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mmy-travel: 1600 mmz-travel: 800 mmcontrol: Siemens 840 D boring spindle diameter: 150 mmbore spindle turning speed range: 4-1500 U/minFeeds, stepless (Y, Z): 1-9999 mm/minRapid Feed Y, Z, W: 10000 mm/minBoring spindle taper: ISO 50 Milling spindle taper: ISO 60 surface area: 1600 x 2000 mmworkpiece weight max.: 12500 kgtotal connected load: 90 kWweight of the machine ca.: 32200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Control: Fanuc 0i-M X-axis: 650mm Y-axis: 765mm Z-axis: 520mm A-axis: +30° ~ -120° C-axis: 360° Table length: 630mm Table width: 630mm Max. part weight: 500kg Spindle taper: Dual Contact Big Plus ISO 40 Spindle speed: 12.000rpm Spindle motor power: 22kW Positions on ATC: 40 Dimensions: Length: 4585mm Width: 3200mm Height: 3295mm Weight: 12.500kg Machine is equipped with: Standard: - Fanuc 31-iA5 - 12.000rpm Spindle - Lineair guides for X, Y & Z-axis - Tool measuring system Renishaw TS27R - Through spindle coolant 16 bar - 40 positions ATC - Handwheel Option: - Fanuc 0i-M (4+1) - Oil skimmer - Chip conveyor - Auto power off - AOF AF20-P oil mist filter - Renishaw RMP60 probe - High pressure unit PF70-30DVF (70 bar, 25ltr/min) - Tool load monitoring Auction-ID: A1-49370-3
5.000 € 
