MORBIDELLI macchina utilizzata in vendita

Key data: 900 mm, 2600 mm, 80 mm

Modello Author 503, macchina a 3 assi, x = 900 y = 2600 Z = 80, con sega a scanalatura, 1 x fresatura, foratura di tasselli a T 18 + 3 sul lato anteriore, 2 + 2 dal retro e dalla parte anteriore 1 x, anno di costruzione 95

Funziona, funziona correttamente, viene occasionalmente utilizzato nella fresatura e foratura specialistica di mobili. Attrezzatura molto semplice, senza problemi e graziosa. 16 mandrini di foratura, 2 elettromandrini, gruppo sega, pompa del vuoto Becker. Controllo Trio 6000.

Testa di foratura orizzontale S/R guidata a sinistra preso da un scm Tech 99 quando è stato rottamato

Key data: 3050 mm, 1200 mm, 120 mm

Versione tecnica: Consolle 3050 x 1200 mm con 6 staffe spostabili manualmente, 2 ventose per consolle e una guida di scavo pneumatica Ausilio per l'installazione del laser spot, pompa a vuoto Controllo CNC XILOG Plus Mandrino principale 7,5 kW HSK 63F con asse C, 1500 – 24.000 giri/min Piastra di cambio utensile 10 volte 1 unità adattatore per sega girevole Testa di foratura con: 12 mandrini verticali, 4+2 mandrini orizzontali, sega per scanalature Dimensioni di installazione: 6800 x 3040 mm Peso: 2850 kg

Vendo un centro di lavoro CNC a 3 assi SCM Morbidelli Author A630S con tavolo a traliccio Anno di costruzione 2004. Configurazione: Mandrino principale a 3 assi SCM 6,6kW 24.000 giri/min Caricatori utensili 2 x 6 posizioni ISO30 sulla testa Secondo mandrino principale a 3 assi SCM 6,6kW 24.000 giri/min Secondo magazzino utensili 6 posizioni ISO30 sulla testa 1x sega a scanalatura direzione X Testa di perforazione 12+4+4 mandrino di foratura completamente attrezzato Piano di lavoro utilizzabile 3050x1370 x Z 180mm. 2 superfici di lavoro, 4 zone di serraggio Sistema automatico di Lubrikazion centrale Pompa Gardner Denver 215/260 m3/h. Xilog Plus nuovo software con le istruzioni per l'uso. Ottime condizioni. Disponibile lo stesso.

Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.

X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t.

X-travel: 3660mm, y-travel: 1250mm, z-travel: 180mm, length: 5300mm, width: 2200mm, height: 2500mm, weight: 4.3t.

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

Description: Maximum workpiece size: 600 mm . Table depth: 320 mm Spindle Quantity: No. 35 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,500 mm, weight approx.: 700 kg

Description: Machine with possible inclination up to 45°. Maximum travel along the drilling axis: 75 mm Maximum machinable width: 600 mm , Maximum stroke in depth: 165 mm Machine equipped with No. 35 vertical spindles, powered by two ICME electric motors. Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,400 mm, weight approx.: 400 kg

Description: • CNC machining centre (3-axis) • Serial number AL5632 • Total installed power 20 KW • Working area approx. 2600 x 1150 mm • Panel passage height 180 mm • Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm • Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min • Tool magazine with 10 positions (some elastic nippers are broken) • Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder • Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change • Saw unit to groove in X direction • Vertical drilling spindles in X-axis direction: 9 • Vertical drilling spindles in Y-axis direction: 7 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Automatic lubrication • Remote control panel • 8 consoles with 22 vacuum suction cups total • 4 lifting modules for heavy wo ...

Description: • CNC machining centre • Serial number AL5132 • Total installed power 20 KW • Useful working area approx. 2700 x 1000 mm • Maximum travel speed in the axes direction x-y-z: 50-45-22.50 m/min • , 2 x vertical milling unit with manual tool change • Saw unit to groove • Vertical drilling spindles in X-axis direction: 6 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 1 + 1 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Remote control panel • 6 consoles with 2 vacuum suction cups each • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h Approx. Onsite Dimension. (l x w x h): 5,500 x 2,800 x 2,500 mm, weight approx.: 2,900 kg

Description: • CNC machining center • Serial number AA2/002228 • Total installed power approx. 25 KW • Maximum programmable speed in x-y-z axis directions: 120-80-30 m/min • Workpiece length from 250 mm up to 3000 mm (with piece handling) • Workpiece length from 250 mm up to 1950 mm (without piece handling) • Workpiece width from 70 mm up to 1300 mm • Workpiece thickness from 10 mm up to 80 mm (machining a single piece) • Workpiece thickness from 10 mm up to 60 mm (30 + 30 mm)(machining 2 overlapping pieces) • Maximum workpiece weight 100 kg • Input table with approximate dimensions 2430 x 850 mm, mobile workpiece, clamping with grippers, driven belt output table • Identical upper and lower equipment to machine the part simultaneously on both sides: • 1 - Electrospindle: power 7.50 KW-max. 24000 rpm, for HSK F63 tool holder • 2 - Swiveling saw group to groove  ...

Description: Serial number AL1950 Documents: use and maintenance manual, programming diskette Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg

Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible

This MORBIDELLI Universal 3012 TV Universal Machining center was manufactured in the year 2008. It is equipped with a CNC XILOG Plus control unit and has 3 axis.

- Work surface 3050 x 1360 mm - Machining height 180 mm - Electrospindle 10 HP ISO 30 rapid 8 - 6 position tool tray - saw diameter 150 mm 0-90 ° - 18 independent vertical spindles - 4 opposite horizontal spindles in Y - 2 opposing horizontal spindles in X - 6 working beams with 18 suction cups - Xilog management - 100 mc/h vacuum pump - Safety system with bumpers - CE standards - fully functional 7 -regular service

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

Produttore: Morbidelli, Tipo: Autore 600, Anno: 1999, Velocità di alimentazione max m/min: 50, Campo di lavoro X: 3000, Campo di lavoro Asse Y: 915, Asse C: sì, Numero di mandrini di fresatura verticali: 1, Sistema di adattamento utensili: ISO 30, Motore di fresatura 1 ore di potenza: 7,5, U/min 1) Vertikal: 1500 - 1800, Numero di cambi utensili: 1, Numero utensili per magazzino utensili: 10, Trapani verticali-X: 18, Trapani orizzontali-X: 6, Tavola trasversale: sì, Pompe per vuoto m³/h: 100, Anno :1999

Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998

Produttore: Morbidelli, Tipo: U 50, Anno: 1991, Controllo: Morbielli, Velocità di alimentazione max m/min: 200, Campo di lavoro X: 3590, Campo di lavoro Asse Y: 1800, Campo di lavoro Z: 55, Fresatura motore 1 ore potenza: 5 - 7,5 PS, rpm 1): max 18.000, Trapani verticali-X: 14, Foratura verticale Y: 16, Trapani orizzontali-X: 2, Foratura orizzontale Y: 2, Traversa: sì, Anno :1991

Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999

Produttore: Morbidelli, Tipo: Autore 600, Anno: 2000, Campo di lavoro X: 4400, Campo di lavoro Asse Y: 1300, Numero di mandrini di fresatura: 2, Sistema di adattamento utensile: ISO 30, Motore di fresatura 1 ore di potenza: 10 PS, Motore di fresatura 2 ore di potenza: 9 PS, Numero di magazzini utensili: 1, Numero utensili per magazzino utensili: 10, Trapani orizzontali-X: 6, Tavola trasversale: sì, Pompe per vuoto Qty: 1, Pompe per vuoto m³/h: 100, Foratura verticale: 18, Macchina a braccio radiale: sì, Anno :2000