We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Modello
(Fabbricante: MAZAK)
usato
This MAZAK Multiplex 6100 + robot FLEX-GL50F Lathe was manufactured in the year 2001 in Japan. It is equipped with a Mazak Mazatrol 640T control unit and has 3 axis. The machine has a spindle speed of 6000 rpm, is in good condition and well maintained.
usato
This Mazak SPACE GEAR-510 Mk II Laser cutting machine was made in 2003 in Japan and has 52204 production hours. It is equipped with a Mazak MAZAK & FANUC L64 control unit. The machine has a laser power of 2,5 kW.
usato
This MAZAK INTEGREX J-200 S Lathe was manufactured in the year 2016 in Japan. It is equipped with a Mazatrol Matrix Nexus 2 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm. See original purchase confirmation for more technical details as PDF (German) attached.
usato
This MAZAK INTEGREX 200 IV S Lathe was manufactured in the year 2007. It is equipped with a Matrix control unit. The machines disposes od a spindle, a counter spindle, a milling spindle and a chip conveyor.
usato
This Mazak Super Turbo-X510 Mk III G Laser Cutting machine was manufactured in the year 2013 in Japan and has 25000 production hours. It is equipped with a Mazatrol Preview control unit. The machine has a laser power of 2,5 kW.
usato
This Mazak Multiplex 6200-II Lathe was manufactured in the year 2015 in Japan. It is equipped with a Mazak Matrix 2 control unit. The machine has a spindle speed of 5000 rpm.
usato
This MAZAK VCN-530C Vertical Machining center was manufactured in the year 2020 in Japan and has 1440 spindle hours. It is equipped with a MAZATROL SmoothG control unit. The spindle has cooling through spindle (15 bar). It is in a very good condition with low spindle hours.
usato
This MAZAK VTC-20B Vertical Machining center was manufactured in the year 1998. It is equipped with a Mazatrol MPlus control unit and has 3 axis. The machine has a spindle speed of 40-7000 rpm.
usato
This MAZAK NEXUS 4000-III Horizontal Machining center was manufactured in the year 2013 in Japan and has 59968 hours. It is equipped with a Mazatrol control unit and has 4 axis. The machine has a spindle speed of 18000 rpm.
usato
This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.
usato
This Mazak VTC-200B Vertical Machining center was made in the year 2000. It is equipped with a Mazatrol PC-FUSION-CNC control unit.
usato
This Mazak HCN-5000 Horizontal Machining center was manufactured in the year 2018. It is equipped with a Mazak Smooth G control unit. The machine has a spindle speed of 18000 rpm.
usato
This MAZAK MTV655/60 Vertical Machining center was manufactured in the year 1996 in Japan. It is equipped with a MAZATROL M PLUS control unit. The machine has a spindle speed of 25 - 6000 rpm.
usato
This MAZAK VTC-200C Vertical Machining center was manufactured in the year 2005 in the United Kingdom. It is equipped with a MAZAK MAZATROL 640M control unit and has 3 axis. The machine has a spindle speed of 12000 rpm and operates with a table size 2000 x 510 mm.
usato
This MAZAK INTEGREX i-800V/8 (2017) 5-Axis Universal Machining Centre (Turn-Mill) was manufactured in 2017 in Japan. It is equipped with a high torque milling spindle with scale feedback (max. 5.000 rpm), a 80x tool magazine (capto), MAZAK tool identification system and multi tool function. The machine has 5 axis machining package for SmoothX (X-axis stroke: 1.700mm / Y-axis stroke: 1.500mm / Z-axis stroke: 1.150mm / B-axis: 150° (-30°, +120°) / C-axis: 360°), operates with a max. machining diameter of 1,500 mm and a table speed of 500 rpm. It comes with a RENISHAW RMP 600 probe, laser tool measurement, coolant temperature control system, blowing air through coolant, large volume coolant option and chip conveyor (rear, right). The cutting time is at 3539 hours. This INTEGREX i-800V/8 Multi-Tasking machine combines full 5-axis milling and powerful turning operations to product ...
usato
This Mazak Optiplex Nexus 3015 Laser cutting machine was manufactured in the year 2016 and has 11735 production hours. It is equipped with a Mazatrol Preview 3 control unit. The machine has a laser power of 2,5 kW.
usato
This MAZAK FJV-35/60 Vertical Machining center was manufactured in the year 2003. It is equipped with a MAZATROL PC-FUSION-CNC 640 M control unit. The machine has a spindle speed of 40-10000 rpm.
usato
This Mazak SQT-200 Lathe was manufactured in the year 1997 in the United of Kingdom. It is equipped with a Mazatrol T PLUS control unit. The machine has a Lathe chuck kitagawa 8â + 10â and disposes of a Mayfran chip conveyor.
usato
This MAZAK HCN-8800 Horizontal Machining centre was manufactured in the year 2008 in Japan. It is equipped with a MATRIX 1 control unit. The machine disposes of a 4 axis and a spindle. Tool magazin with a capacity of 120 tools.
usato
This MAZAK H400N Horizontal Machining center was manufactured in the year 1991 in the United Kingdom. The machine has 4 axis and a spindle speed of 10000 rpm.
usato
This MAZAK Multiplex 6200 Lathe machine was manufactured in 2000. It is equipped with a MAZAK Mazatrol 640T control unit. The machine dispose of a 2 turrets with 16 tools each one and 2 spindles. The machine has milling function too.
usato
This MAZAK H-500 Horizontal Machining center was manufactured in the year 1990 in Japan. It is equipped with a Mazatrol M32 control unit and has 4 axis. The machine has a spindle speed of 50-7000 rpm and a FMS System.
usato
This Mazak Integrex 30 Lathe was manufactured in the year 1999 in Japan. It is equipped with a Mazatrol PC-Fusion-CNC 640MT control unit. The machine has a spindle speed of 3500 rpm.
usato
Mazak FH 4800 Horizontal Machining Center Machine is in working condition • Control: Mazatrol Fusion 640M • Spindle Taper: BT 40 • Magazine:120 sets • Atc: Arm Type • Table Size: 400 mm x 400 mm • Pallet Changer: Available: Double Pallet • Travel X: 560 mm • Travel H: 610 mm • Travel Z: 560 mm • Table: B Axis: 1 Degree • Power Spindle Motor: 22 KW • Spindle speed: 25000 rpm • Status: Under power, Ready to Use • Cooling through Shaft: Available • Chip conveyor: Available
usato
turning diameter: 575 mm turning length: 1500 mm control: Mazatrol PC Fusion 640MT total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol PC Fusion 640 MT control milling spindle C-axis Y-axis 40-fold magazine 3-jaw chuck Kitagawa Steady rest tail stock Tool Eye coolant device chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 575 mm Drehdurchmesser über Schlitten / turning diameter over sledge 470 mm max. Drehlänge / max. turning length 1500 mm X-Achsenverfahrweg / travel x-axis 450 mm Z-Achsenverfahrweg / travel z-axis 1527 mm Y-Achsenverfahrweg / travel y-axis +-90 mm max. Drehzahl Hauptspindel / max. spindle speed main spindle 35-3000 UpM / rpm Drehzahl Frässpindel / speed of milling spindle 15-6000 UpM / rpm Anzahl der Magazinplätze / number of places in magazine 40 fach /fold Gewi ...
usato
CNC : MATRIX II Maxi turning diam : 350 mm Distance between centers : 500 mm Main spindle chuck diam : 210 mm Spindle bore : 76 mm Stroke X/Z : 30/33 m/min Spindle speed : 5000 rpm Power motor : 26kW Turret : 12 posts Subspindle speed : 6000 rpm Subspindle power : 7.5kW EQUIPMENT : Chip coveyor : Barfeeder : LNS
usato
CNC turning center with 6-axis Mitsubishi robot arm (robot cell) - Machine can be tested under power Specifications: Manufacturer: Mazak Model: QTG-50 SG Control: Mitsubishi M80 Year of construction: 2019 Properties: oscillation diameter: 470 mm oscillation diameter over Feed size: 100-135 mm rod diameter: 32 mm workpiece weight for shaft parts: 20 kg workpiece weight incl. chuck with suitable clamping force and stiffness of the feed: 20Kg Distance spindle nose - tool holder slide 105 to 340mm Main spindle: speed 7,000 min-¹ Min. speed 35 min-¹ Gearbox gradation Continuously variable Spindle nose H6 flat, 115 mm diameter. spindle passage 45 mm 30 min. rated power 7.5 kW B3lphazt0t TOOL REST: Tool rest type Tool holder slide Number of tools: 6 Tool dimensions (turning tool): 16x16mm Tool dimensions (drilling tool): 20 mm diameter Feed axles Rapid tr ...
usato
MazaK M Plus X Axis Strokes: 1150 Y Axis Strokes: 1000 Z Axis Strokes: 1000 Board length: 630 Deck Board Width: 630 Max Piece Dimensions Length X Width X Height Table: D.1050XH.1100 Spindle Table Surface: Tapped holes Max Spindle Piece Weight: 1500 Spindle Spindle: 8000 Spindle holder: ISO 50 Torque Cont 10 Min Spindle: 600 Nm Rapid Displacement X Axis Rapid Displacement: 30000 Rapid Move Y Axis Rapid Move: 30000 Rapid Displacement Z Axis Rapid Displacement: 30000 Number of Atc Warehouse Tools: 120 Max Atc Magazine Tool Diameter: 225 Max Tool Length from the Atc Warehouse Reference Line: 630 ATC magazine tool selection method: fixed Max Tool Weight Atc Warehouse: 30 Kg Atc Warehouse Tool Change Time: 5 SEC. Refrigerant pressure: 50 BAR Machine Dimensions Height: 21350 Machine Dimensions Width: 3480 Depth Machine Dimensions: 6750 Machine Dimensions Weight: 20900 ...
usato
Mazak Hcn 5000 Fusion Used Horizontal Machining Center Machine In Good Condition. Table 4th Continuous Axis Tecnoforme 20 Bar System With Coonsep Lateral Rotofilter Government Unit: FUSION X-axis Strokes: 730 Y axis Strokes: 730 Z axis Strokes: 800 Table Length: 500 Deck Width: 500 Max Piece Dimensions L X W X H Table: D.800x1000 Spindle Table Surface: Tapped Holes Max Piece Weight Spindle: 500 kg Spindle Spindle: 18000 Spindle Shank: ISO 40 Torque Cont 10 Min Spindle: 168 NM X-Axis Rapid Movement Rapid Movement: 60.000 Y-Axis Rapid Movement Rapid Movement: 60.000 Z Axis Rapid Movement Rapid Movement: 60.000 Number of Atc Warehouse Tools: 80 Atc Warehouse Max Tool Diameter: D. 95 D.170 Max Tool Length From Atc Warehouse Reference Line: 170 Atc Warehouse Tool Selection Method: FIXED Max Tool Weight Atc Warehouse: 12 Atc Warehouse Tool Change Time: 2.8 Refrigerant ...
usato
Table size : 2000 x 760 mm X/Y/Z : 1740/760/660 mm Spindle taper : ISO 40 Spindle speeds : 12000 rpm Tool changer : 48 stations CNC : Mazatrol 640 M Equipped with : Wireless touch probe : Chip conveyor : Tool holders : Vice : New main spindle & bearings in 2022