KRAUSS MAFFEI macchina utilizzata in vendita

Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 915x915 Clearance between columns (hxv) [mm] 560x560 Min./max. mold height [mm] min 350 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 679 Injection weight [g] 618 Injection pressure [bar] 2006

This KRAUSS MAFFEI 150-700 C2 Injection moulding machine was manufactured in 2000 in Germany. This machine offers a clamping force of 1500 kN and features a mold mounting platen sized at 780 mm x 790 mm. With a tool opening stroke of 600 mm and an opening width of 900 mm. Screw diameter options include 45 mm, 50 mm, and 55 mm, while injection pressures range from 1564 bar to 2336 bar. The screw speed reaches up to 356 rpm, with a dry running speed of 1700 l/min. It requires approximately 345 liters of oil filling. Contact us anytime for further information.

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

Producer KRAUSS MAFFEI Type KM 250/1400 CX Year 2010 Clamping unit Clamping force 250 ton Opening stroke 820 mm Distance between tie bars 710 x 630 mm Mould height min. 480 mm Opening width 1300 mm Injection unit Screw diameter 55 mm Injection volume 570 cm³ Shot weight 519 g Injection pressure 2387 bar Measurements and weight Dimensions 6.1 x 2.2 x 2.3 m Machine weight 15000 kg

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Height of the form [mm] -600 Max. mold height [mm] -1150 Column spacing (hxv) in the light (mm) - 1000 x 930 Mounting plates size - 1490 × 1440 Ejector stroke (max) [mm] -250 Screw diameter [mm] -90 Injection weight [g] -2500 Oil quantity [liter] -1000 Injection sequence in mold -2 Number of hydraulic cores S / R- 0/2 The maximum distance between the plates [mm] -1500

Closing unit Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Injection weight [g] 1304 Injection pressure [bar] 1829 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 36 Dimensions and weight Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6.91 m x 2.20 m x 2.41 m Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380

Clamping force [kN] 20000 Dimensions of mounting plates (hxv) [mm] 2650 x 2400 Clearance between columns (hxv) [mm] 1870 x 1620 min./ max. mold height [mm] 800-1700 Maximum opening width [mm] 3600 injection unit Screw diameter [mm] 150 Injection volume [cm3] 11928 Injection weight [g] 8469 Injection pressure [bar] 1445 Electric-hydraulic equipment Pump motor rated power [kW] 160 Heater power [kW] 109 Dimensions and weight Net weight with control cabinet [t] 111 Dimensions (L x W x H) [m] 14.75 x 4.10 x 3.41

Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1270 x 1310 Clearance between columns (hxv) [mm] 900 x 800 min./ max. mold height [mm] min 480 Maximum opening width [mm] 1650 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Injection weight [g] 1404 Injection pressure [bar] 2205 Electric-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 44 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (L x W x H) [m] 7.65 m x 2.55 m x 2.55 m

Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156 Shot weight [g] 142 Injection pressure [bar] 2429 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02

Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 x 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156

Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38

Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19

Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 25 Injection volume [cm3] 52 Injection weight [g] 47 Injection pressure [bar] 2500 Dimensions and weight Net weight with control cabinet [t] 2.2 Dimensions (L x W x H) [m] 3.3 x 1.2 x 1.9

Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380 Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 393 Injection pressure [bar] 2304 Electric-hydraulic equipment Pump motor rated power [kW] 75 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 6.79 x 2.17 x 2.25

Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19

Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Injection weight [g] 358 Injection pressure [bar] 358 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

Clamping/injection matrix Clamping force [kN] 3500 Mounting plate dimensions (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Shot weight [g] 393 Injection pressure [bar] 2304 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 6,79 x 2,17 x 2,25

Krauss Maffei KM 160-380 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 1250 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 201 Shot weight [g] 183 Injection pressure [bar] 1860 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] m 4,6 x 1,6 x 2,1

Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1530 Clearance between columns (hxv) [mm] 1120 x 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 3367 Injection weight [g] 3064 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 61 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (length x width x height) [m] 10.5 x 2.65 x 2.4 Hydraulic auger drive with permanent motor (with torque limitation in the upper speed range). The screw drive is adjustable on the monitor screen. For independent and parallel plasticization when opening and closing the mold, a screw drive with an electric motor or a second pump unit is used Single pneumatic valve on movable mold mou ...

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

Krauss Maffei KM 450-3500 C3 Closing unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 26.3 Dimensions (length x width x height) [m] 7.98 x 2.35 x 2.51m Pressure tank for increased injection power. The screw is driven by an electric motor Air core Hydraulic core 10 x rotameters Euromap 67

Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43

Clamping/injection matrix Clamping force [kN] 5000 Mounting plate dimensions (hxv) [mm] 1270 x 1310 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Shot weight [g] 1404 Injection pressure [bar] 2205 Electro-hydraulic equipment Power rating of the pump motor [kW] 90 Power rating of barrel heating [kW] 44 Dimensions and weight (approximately) Net weight with control cabinet [t] 7.9 Dimensions (L x W x H) [m] 7,65 m x 2,55 m x 2,55 m

Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 995x1050 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] min 330 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 523 Injection weight [g] 476 Injection pressure [bar] 1904 Dimensions and weight Net weight with control cabinet [t] 12.5 Dimensions (length x width x height) [m] 5.97 x 2.04 x 2.36