하위 범주
(3 카테고리 레벨)
생산자:
(범주: 706)
특징 볼륨 3600 L 재료 번호. V2A 총 높이 1300 mm 외경 1200mm 깊이 3400mm 설명 탱크 문장: 두 개의 학 눈 용접 노즐 DN50 앞면: 클래퍼 바닥 시음 탭 맨홀 440 x 340 명확한 절차 후면: 클래퍼 바닥 언더바디: 디스크 밸브 DN50이 있는 잔류 배수관 베어링 컵 없
특징 볼륨 6000 L 재료 번호. V2A 작동 압력 8 bar 총 높이 1600 mm 실린더 높이 1300mm 외경 1400mm 깊이 4600 mm 설명 탱크 문장: 압력 피팅용 플랜지 연결, 배관을 앞으로 당기는 상태 앞면: 클래퍼 바닥 압력 피팅 샘플 탭이 있는 플랜지 맨홀 410 x 320 프란츠 포겔 압력 피팅이 있는 정화 배수관 후면: 클래퍼 바닥 언더바디: 경사진 시트 밸브 DN50이 있는 잔류 배수관 베어링 컵 2개
특징 볼륨 6200 L 재료 번호. V2A 총 높이 2050 mm 실린더 높이 1740mm 외경 1740mm 깊이 2700mm 설명 탱크 문장: 용접 노즐 DN50 앞면: 원뿔 베이스 시음 탭 맨홀 410 x 320 노즐 플랩 크기 37 후면: 원뿔 베이스 언더바디: 경사진 시트 밸브 DN50이 있는 잔류 배수관 베어링 컵 2
팔레타이저 GEA 프로코맥 오페라 제작 연도: 2009 출산 포함: - 완전한 팔레트 컨베이어 시스템 - 팔레트 매거진 - 로보팍 스트레치 래핑 머신 - 모선 팔레트 취급 - 로고팩 팔레트 라벨링 시스템 GEA 프로코맥 오페라는 저급 공급 팔레타이저로, 저급에서 중간 생산 능력을 위해 설계되었습니다. 이 장치는 다양한 팔레트 패턴과 팔레트 크기로 자동 전환을 제공하여 생산 라인 종료 시 신뢰할 수 있고 유연한 팔레타이징을 보장합니다. 이용 가능 여부: 2026년 9월
Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3x, Internal height: 2.350 mm, Total outsid ...
Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3 ...
CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...
Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...
Bag filter housing – 2 size #2 bags – stainless steel 304Number of bags: 2Bag size: #2Material: Stainless steel 304Housing dimension D (mm): 426Height H (mm): 1580Max. working pressure (bar): 8Design pressure (bar): 10Max. working temperature (°C): 130Inlet/outlet: DN65 flangeSeal: SiliconeSurface: SandblastedData source: Individual drawingDimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304, the drawing also applies geometrically where its title block specifies a different material.
Bag filter housing – 3 size #2 bags – stainless steel 304Number of bags: 3Bag size: #2Material: Stainless steel 304Housing dimension D (mm): 450 ±3Height H (mm): 1800 +3/?1Max. working pressure (bar): 6Design pressure (bar): 8Max. working temperature (°C): 80Inlet/outlet: TC50 Tri-ClampSeal: VitonSurface: SandblastedData source: Individual drawingDimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304, the drawing also applies geometrically where its title block specifies a different material.
Bag filter housing – 4 size #2 bags – stainless steel 304Number of bags: 4Bag size: #2Material: Stainless steel 304Housing dimension D (mm): 530Height H (mm): approx. 1741Max. working pressure (bar): 6Design pressure (bar): 8Max. working temperature (°C): 80Inlet/outlet: Ø108 flangeSeal: SiliconeSurface: Mirror polishedData source: Individual drawingDimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304, the drawing also applies geometrically where its title block specifies a different material.
Cap Blower 12000 Caps/ Hour2x 2m Pipes2x Curve 90 DegreeLot of Shorts pics And Connections
Length 3500 mmStainless steel structureComplete with - Side guides- Support feet- N° 2 adjustable speed motors- Chains width 82.6 mm- Motorized device with idle rolls for round bottle sliding
Rinser: 24 valvesFiller: 24 valvesScrew Capper: 4 headsBottle format: Diameter 46?mmCap format: 22×30?mm closure head
Technical detailsSpeed: 6000 Bottles/hourProducts: Wine (Still)Containers: Glass, PETFormats: 0.187 L PET bottleSafety features: YesManuals: YesFill type: Gravity/light depressionNeck type: 22 mmConsisting of:- Conveyors ConpartThe line ensures seamless movement of bottles using conveyors with suction systems, stabilizing each bottle while maintaining a nominal capacity of 7200 bottles per hour.Filling Monoblock Euro Star LDG24-24-4V, Year 2014- Operates with a rinser / blower equipped with 24 clamps, enabling a secure grip on the bottle neck. The injection system prevents fluid flow when bottles are absent.- Fills wine using 24 stainless steel spouts, which manage slight vacuum and inert gas overpressure to maintain ideal filling conditions. As a result, the conical-bottomed tank ensures complete product discharge at the end of each cycle.Labeling Machine Conpart Arco M25, Ye ...
Bertolaso Screwcapper 4 Head1 Set Heads 30x601 Set Heads Polykork 31x40Inkl Pic and Place und Adjustible StarsDriven by Kardan
The turntable is used for loading or unloading products, containers, and bottles. It is freestanding and has its own drive system. The rotational speed can be controlled continuously with a frequency converter.Product-contacting parts are made of stainless steel.Turntable diameter: 800mm.It is freestanding and height-adjustable on dome-shaped feet.It also has a side attachment for sliding containers from a pallet onto the turntable, and side guides for sliding containers onto a conveyor belt.The power connection is about 0.35 kW 400V.YouTube Video: youtu.be/VLwFuRR2NG0
consisting of: - Depalletiser, KETTNER, year 2000, 15000 bph,- Rinser with air, Alwid, year 1999, 7500 bph,- Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour- Labeller, Krones Variomatic, year 2001, 8000 bottles/hour- Carton erector, KETTNER, year 2001, 20 cartons/min.- Packer, KETTNER, year 2001, 7000 bottles/hourDetails:- Control Siemens S7- different format sets available,- for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm- annual maintenance by Krones technicians- very good condition
This screw capper from renowned manufacturer Zalkin features 5 capping heads designed for plastic closures. It includes a pick-and-place unit and operates clockwise (left-to-right).For 42mm CapFormat Set 100ml Spice Bottle
TECHNISCHE ANGABENAnzahl Stationen: 2 Stationen für SelbstklebeetikettenEtikett: Deckel + BodenEtikett-Breite: 30-300 mm (zu spezifizieren)Behälterformat: runde und eckige FlaschenSeitliche Gurtbänder zum fixiren der Produkte beim EtikettierenLeistung: bis ca. 4000 Fl./Std.CE Konformität: Erfüllt die CE RichtlinieGewicht: ca. 600 KGAbmessungen: 2800(L) x 1300(B) x 2400(H) mmYouTube Video: youtu.be/zuztvYhDkNc
Depalletizer and Palletizer – Flema Star C-LCFor NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right.Crate Unpacker – RICO UNO 1-Head Type 124For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation.Bottle Cap and Cork Remover – ADELSKI Type PPE 2005For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation.Bottle Washer – PAC CB 14-0.5l-R-7 LII CompactFor NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175.Bottle Inspection – SYSCONA LC 10 FDCaustic control + metal detection, Year: 2007.Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6For NRW, Euro, and Ale 0.33l and 0.5l ...
