하위 범주
(3 카테고리 레벨)
생산자:
(범주: 706)
Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Product: still wine Containers: glass bottles, design bottle 0.75 l Line output: 12,000 bottles/h Closures: natural cork, aluminium roll-on screw caps, shrink capsules Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off dep ...
Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper Application: filling and closing of glass bottles Fil ...
Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data Manufacturer: Krones Model: AirCo Year of manufacture: 2011 Machine type: air conveyor, neck handling of empty PET bottles Total conveyor length: approx. 60 m Declining sections: 10 sections at 10°, approx. 16.8 m in total Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right Fan units: 7, each with filter housing Diverter: 1 Conveyor sections In ...
Overview This GALDI RG50/2 UCS is an automatic form-fill-seal machine for gable-top cartons, built in 2007 in Italy. It erects the cartons from flat blanks, fills and seals them at up to 3,000 cycles per hour, and a cap applicator is included. The machine currently fills liquid egg products and is suitable for milk and other liquid food products. It is still installed and in production. Technical data Manufacturer: GALDI (Italy) Model: RG50/2 UCS Year of manufacture: 2007 Machine type: automatic form-fill-seal machine for gable-top cartons Capacity: up to 3,000 cycles per hour Carton format: 95 x 95 mm cross section Products: liquid egg products; suitable for milk and other liquid foods Installed power: 28 kW Power supply: 380 V / 50 Hz Weight: 5,000 kg Equipment Magazine for flat carton blanks Filling station with sanitary product valves Cap applicator Control panel with QuickPanel View ...
Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data Manufacturer: Scaligera Model: ULISSE 4000 Year of manufacture: 2016 Machine type: sleeve labeler with steam shrink tunnel Output: up to 4,000 cans/h Containers: sleek and standard cans Machine direction: left to right Power supply: 400 V, 3-phase, 50 Hz Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) Max. current: sleever 7 A, ...
Overview Robotic end-of-line palletizing system from a wine bottling plant, consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack the packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. The system is still installed in Belgium and can be viewed by appointment. Technical data Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller Gripper clearance: 1,200 x 240 mm Pallet size handled by the destacker: 1,100 x 1,200 mm Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm Film: pre-stretched LLDPE, pre-stretch levels ...
제조사: Pack und Palettiertechnik 루돌프 스타인레 거스트호펜 GmbH 유형: RAPID-EK 제작 연도: 1993 박스 바닥 면적: 400 mm × 300 mm, 유로노름 팔레트에 적합 1200 mm × 800 mm 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 관람: 편의에 따라 위치: 독일 바이에른 기압: 6바 연결: 220/380 V, 50 Hz 제어: 24V DC
라덴스카 & 스타인레(RS) ARO-P3 언패커는 일반적으로 병을 상자에서 꺼내는 산업용 음료 기계입니다 품목 상태: 운영 중 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 관람: 편의에 따라 위치: 독일 바이에른 출력: 3 kW 연결: 380 V, 50 Hz 기압: 6
Radenska & Steinle(RS) SPN-2S는 주로 음료 산업에서 반환 가능한 병 상자 청소에 사용되는 전문 크레이트 세척기입니다. 품목 상태: 운영 중 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 조회. 협정에 따라 연결: 380 V, 50 Hz 출력: 8 kW 위치: 독일 바이에
Schymanski GmbH(MAG) 유형: SIRIO 8-24는 주로 음료 산업에서 반환 가능한 병에 사용되는 산업용 병 세척기/병 세척기입니다. 품목 상태: 운영 중 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 관람: 편의에 따라 위치: 독일 바이에른 연결: 400 V, 50 Hz
미호 DAVID는 매우 혁신적인 빈 병 검사기입니다. 이 시스템은 전 세계 음료 및 식품 산업에서 재사용 가능하거나 일회용 병(유리 또는 PET으로 만들어짐)의 결함을 원활하게 검사하는 데 사용됩니다. 기술 성능 데이터: 높은 처리량: 이 시스템은 조립 라인 운영에서 시간당 최대 72,000병을 완벽하게 제어할 수 있습니다. 유연성: 이 시스템은 다양한 형태와 크기의 용기에 적합합니다. 위생적인 디자인: 기계적 설계는 병입 공장의 엄격한 위생 요구사항에 최적화되어 있으며 세척이 용이합니다. 품목 상태: 운영 중 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 관람: 편의에 따라 위치: 독일 바이에른 연결: 230 V, 50 Hz
KHS, Krones, Hormes는 음료 및 액체 식품 산업을 위한 병입 시스템과 기계의 선도적인 제조업체이자 공급업체입니다. 병 채우기 제조사: KHS 유형: VVF KHS 병 충전 시스템, VVF 유형(종종 델타 VVF 또는 KHS/SEN VVF라고도 함)은 CO2가 포함된 음료를 유리병이나 PET 병에 채우기 위해 특별히 개발된 고전적인 기계식 역압 충전 시스템입니다 병뚜껑 덮기 시스템 제조사: 호름스 종류: KK/SV (크라운 코르크 / 스크류 캡 조합) 이 기계는 매우 작은 공간에 두 가지 다른 캡핑 기술을 결합합니다. 병(주로 유리병)을 크라운 코르크(맥주, 레모네이드용)나 스크류 캡(주스, 와인, 미네랄 워터용)으로 유연하게 닫을 수 있습니다. 회전식 라벨링 기계 제조사: 크로네스 유형: 프론토매틱 제 ...
Radenska & Steinle(RS) ERO-3T는 음료 산업을 위한 산업용 병 포장기(패커/언패커)입니다. 이 기계는 주로 맥주, 미네랄 워터, 청량음료 등 반환 가능한 유리병의 자동 충전 라인에 사용됩니다. 기술 사양 및 세부 사항 기계 종류: 병 포장기 (그리퍼 헤드 패커) 포장 헤드: 3개의 헤드(그래서 '3T'라는 명칭)로 구성되며, 병 세그먼트를 평행하게 잡고 이동하도록 설계되었습니다(예: 6x4 또는 5x4 병과 같은 표준 크레이트 크기의 포장 그리드). 작동 압력: 6 바 공기압(그리퍼 헤드의 공압 제어). 품목 상태: 운영 중 이용 가능 여부: 2027년 1월 13일부터 해체: 구매자 관람: 편의에 따라 위치: 독일 바이에른 연결: 380 V / 50 Hz
Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: MBK 12 AS Year of manufacture: 2006 Machine type: capsule placing and shrinking machine Output: 3,000 - 12,000 bottles/h Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm Head diameter: 33 mm Heating stations: 12 Capsule magazine: 1,800 capsules Bottle height: 235 - 360 mm Bottle diameter: 50 - 115 mm Working height: 1,100 mm (+/- 50 mm) Direction of travel: left to right Power supply: 400 V, 50 Hz; main drive 0.75 kW Compressed air: 6 - 7 bar, approx. 350 l/min Overall dimensions (L x W x H): 3,7 ...
Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data Manufacturer: KHS Model: Innofill NRF Year of manufacture: 2007 Output: 12,000 bottles/h Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top Vacuum device with vacuum pump Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps Machine pitch 36π, running direction left to right Conveyor: stainless ste ...
Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data Manufacturer: Logopak Model: LOGOMATIC 920 II PF Year of manufacture: 2007 Machine type: print-and-apply pallet labeller Output: 4 labels/min Print methods: direct thermal and thermal transfer Label size: 148 x 210 mm (W x H), 3 mm gap Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) Mounting: vertical, print head at the bottom Control: Logopak POWER LEAP II Interfaces: W&T COM server, RS 232 Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V Compressed air: required (valve ...
Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: T20-3 KMT Year of manufacture: 2006 Machine type: bottle dryer (air knife tunnel) Conveyor: plastic chain, 120 mm wide Power supply: 400 V, 3 phases, 50 Hz Control voltage: 24 V DC Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers Siemens SIMATIC touch panel (French, Dutch, German) with output counte ...
Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack CA-1 Year of manufacture: 2006 Machine type: carton erector with bottom gluing Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps Power supply: 400 V, 3 Ph, 50 Hz, 15 A Compressed air: min. 5 bar operating pressure Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm Blank infeed: roller conveyor wit ...
Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack SP Year of manufacture: 2006 Machine type: pick-and-place case packer Bottle infeed: 4 lanes, lane width 85 mm Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles Case clearance: 175 x 400 mm Power supply packer: 4 ...
Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at ...
Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skids own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Corvus Year of manufacture: 2007 (filter housings 2006) Machine type: cartridge filtration system (microfiltration), skid-mounted Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Housing design rat ...
Flow steam generator with 33 kw/h Capacity: 50 kg/h steamStrom / Volt: 400capacity / hour ca.: 50customs no.: 84022000
New Seegräber GmbH TD9 electric steam generator. Manufacturer: Seegräber GmbH, manufacturer article: 100-0001-0900.9.9 kW, steam output 15 kg/h, maximum steam pressure 2.5 bar.3/N/PE 400 V AC, 50 Hz, CEE 5-pole 16 A, fusing 16 A.Water: GeKa coupling, minimum 2.5 bar, steam outlet NW 25.760 × 345 × 690 mm, approx. 50 kg. Cable approx. 5 m.Standard version, accessories quoted separately. Price and delivery time on request.
Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens ...
Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...
Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data Manufacturer: KOSME Model: DEPACK B B1F A/67-Rf Year of manufacture: 2013 Machine type: depalletizer for empty containers Output: up to 13,000 c ...
이 시스템은 이동식 공기 노즐(순수 필터)을 통해 충전 전에 빈 용기/용기/병을 자동으로 세척하는 데 사용됩니다. KOSME JET CLEAN G 16/960 1T UP은 빈 용기를 돌려 (머리 위)에서 회전시키고, 이동식 노즐을 통해 여과된 공기를 불어 느슨한 입자와 불순물을 제거합니다. 이 기계는 용기의 느슨한 침전물을 충전 시스템에 들어가기 전에 제거하는 데 사용됩니다. 용량: 최대 6000병/시간 크기: 2500 x 2500 mm 기계 중량: 1600 kg 연결: 3x400 V, N, 50 Hz 기압: 6바 수압: 3
디팔레타이저는 팔레트, 다층 용기(예: 불어온 병/병 빈칸)를 다음 연결된 기계까지 운송 용기로 분리합니다. 용량: 13,000 bh(13,000 bh) 통제: 지멘스 연결: 3x400 V, N, 50 Hz 보호 등급: IP 54 전력(전기): 27 kW 전류: 49 A 상태: 잘 관리되고 완전 기능 이용 가능 여부: 2026년 43주차부
Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data Manufacturer: H&K (Holstein und Kappert) Model: SVF 120-D Year of manufacture: 1991 Machine type: rotary can filler Filling valves: 120 Can format: 211/202 Output: approx. 80,000 cans/h (330 ml) Power supply: 380 V, 50 Hz, 3/N Rated current: 24 A Control voltage: 24 V DC PLC: Siemens S7-400 (CPU 416-2) Scope of delivery Can filler SVF 120-D with 120 filling valves and can lift cylinders Can seamer: Angelus 121 L (202), year 1991 Can rinser operated tog ...
Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: SK 452 T Year of manufacture: 2002 Machine type: shrink packer for PET bottles with integrated heating tunnel Output: up to 30,000 bottles/hour Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1. ...
