하위 범주
(3 카테고리 레벨)
생산자:
(범주: 706)
Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data Manufacturer: Twin Pack Year of manufacture: 2002 Machine type: handle applicator for beverage multipacks Line output: 20,000 - 30,000 bottles/h depending on format Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l Control: Siemens text operator panel Equipment Handle application unit with tape reels on a blue steel frame above the pack conveyor Control panel with separate start, stop and reset for the front and rear sections, emergency stop Guarded enclosure with transparent doors Condition Still installed and under power. An inspection o ...
Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement
시스템은 습식 접착제 공정을 통해 두 개의 모듈로 라벨링하며, 세 번째 추가 모듈을 통해 핫글루로 라벨링할 수 있습니다. 크기: 약 3.80m x 3.00m 라벨러는 시간당 최대 15,000병의 생산량을 달성합니다. 상태: 작동 중, 완전 기능 기계 크기(LxW): 3800 x 3000 mm 출력: 최대 15,000 bpm 상영 방
병입 라인은 다음과 같습니다: 1. 디팔레타이저/디팔레타이저 제조사: Pack und Palettiertechnik 루돌프 스타인레 거스트호펜 GmbH 유형: RAPID-EK 제작 연도: 1993 기압: 6바 연결: 220/380 V, 50 Hz 제어: 24V DC 2. 포장 해제 제조사: 라덴스카 & 슈타인레 (RS) 유형: ARO-P3 제작 연도: 1995 기압: 6바 연결: 380 V, 50 Hz 출력: 3 kW 3. 상자 세탁기 제조사: 라덴스카 & 슈타인레 (RS) 종류: SPN-2S 제작 연도: 1995 연결: 380 V, 50 Hz 출력: 8 kW 4. 병 세척기 제조사: Schymanski GmbH (MAG) 유형: SIRIO 8-24 건설 연도 2000년 연결: 400 V, 50 Hz 5. 병 검사관 제조사: miho Inspektionsysteme GmbH 유형: 데이비드 제작 연도: 2002 연결: 230 V, 50-60 Hz 6. 병 채우기 라인 병 채우기 제조사: KHS 유형: VVF 병뚜껑 ...
Krones VarioFlash B는 열 제품 처리를 위한 고효율 플래시 저온살균기입니다. 이 제품들은 맥주, 혼합 맥주, 와인, 스프리처의 미생물학적으로 안전한 충전용으로 특별히 개발되었습니다 성능 범위: 전체 제품군은 시간당 1,800에서 60,000리터 사이입니다. 2019년에 발표된 소형 변형은 시간당 18에서 45헥토리터(1,800에서 4,500 l/h)의 출력 범위에 정밀하게 최적화되어 있습니다. 컴팩트 설계: 소형 변형의 KZE 공장 전체는 하나의 용기에 들어갈 수 있도록 치수가 조정되어 있습니다. 이로 인해 현장 내 운송, 설치, 시운전이 훨씬 쉬워집니다. 부드러운 보존: 슬라이딩 PE 제어 시스템(저온살균 장치)과 적응된 온수 회로를 갖춘 맥주는 맛을 최적으로 보존하기 위해 매우 부드 ...
Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Manufacturer (line builder): Leifeld & Lemke Year of manufacture: 1990 (continuously upgraded since) Machine type: complete automatic KEG cleaning and filling line Capacity: up to 130 kegs/h at 30 L (seller-stated) Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery Empty-keg infeed with ce ...
Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Year of manufacture: 2009 Design: low-level infeed palletizer Changeover: automatic, for different pallet patterns and pallet sizes Output range: low to medium production capacities Handled at the site: shrink-wrapped PET bottle packs Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery GEA Procomac ...
Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg
2개의 테트라 팍 필링 라인 1대 필링기: TBA 8 베이스 500B 용량: 6000 TP/h 얌: 1996 작업 시간/시간: 약 30,000시간 1배 패커: TCP 70 얌: 1998년 1대 충전기: TBA 8 베이스 1000B 용량: 6000 TP/h 얌: 1996 근무 시간당 약 15,000시간 1배 패커: TCP 70 얌: 1998년 1개의 어트랙레이터: 테트라 헬릭스 21 얌: 2002년 상태: 중고 이용 가능성: 지금부
3대 충전기: TBA 8 베이스 750B 용량: 6000 TP/h 얌: 1996 작업 시간/시간: 약 30,000시간 3배 패커: TCP 70 얌: 1996 상태: 중고 이용 가능성: 지금부
Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...
Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles.Technical DataCapacity: 14,400 bottles/hour for 0.5 L bottlesProducts: Still and carbonated waterContainers: PET bottlesBottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L, currently running 0.5 L bottlesLabelling: PE Roll-LineCap feeding system: Gravity 26Pack formats: Packs of 12 for 0.5 L and 1.0 L bottles Packs of 24 for 0.5 L bottles Packs of 6 for 1.5 L bottlesPallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mmCondition: Used lineVideo: youtu.be/XUEY0L49VJQMachines and Equipment1. PET blow moulding machine – Sidel SBO 8, year 2006Including preform tipper, preform hopper, elevator, orienter and feed chute2. Air conveyor – Lanfranchi, year 20063. Chiller – MTA, year 20264. Filling machine – SACMI Blu Star ...
Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data Manufacturer: Jakü Model: EGA-CARBO Year of manufacture: 2017 Machine type: deaeration and carbonation unit for water Capacity: 120 - 12,000 l/h Components: water, CO2 Electrical supply: 400 V, 50 Hz Installed power: 16 kW Rated ...
CIMEC 이탈리아의 충전재는 린서, 충전제, 캡퍼로 구성되어 있습니다. 시간당 1,000병을 생산합니다. 수거판에서 수작업으로 적재 및 분
Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.
Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar
Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.
Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible.
Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.
LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottlesIDENTIFICATION- Manufacturer: LEIBINGER- Model: TRANSVASA 12/6 EK- Year of manufacture: 2017- Serial/order number: 472447- Previous application: ciderFUNCTION AND OUTPUT- 12 emptying valves- Counter-pressure emptying with long-tube technology- 6 decapping stations- Direction of operation: clockwise- Nominal output: 2,500 bottles/h for 0.75 l bottles- Adjustable range: 560–2,800 bottles/h- Designed for carbonated beverages, e.g. traditionally produced cider- Automatic removal and collection of pierced bottle closures- Integrated through conveyorPRODUCT AND UTILITY DATA- Maximum product temperature: 20 °C- Compressed air: 6 bar, connection R 1/2- CO? product pressure: 8 bar, gas connection R 1/2- Product outlet: DN 40- Gas discharge: DN 40- Buffer tank: 1 ...
Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...
Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...
품목 번호: 벨로-400-20-MC - 가장자리를 밀봉하기 위해 19개의 필터 플레이트가 있는 효모 필터를 사용했으며, 총 길이는 약 2,300mm - 총 필터 면적: 5.3m², 총 리유 함량: 66리터. - 새로운 모노필라멘트 필터 천 (번호 1001.6439) - 다이어프램 펌프 장착 1,800리터/시간. - 드립 트레이 사용 - 새로운 수동 유압 펌프 - 압력 스위치, 압축 공기 연결, 안전 밸브 - 원하는 와인 스레드 - 1년 기능 보증
Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.
Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SIPA (Italy) Model: SFR 8 Year of manufacture: 2009 Machine type: rotary stretch-blow moulder for PET bottles Number of cavities: 8 Output: up to 12,400 bottles/hour Bottle formats: 0.5 l, 0.75 l and 1.5 l Neck finish: 28 mm / 1881 (short neck) Electrical connection: 400 V, three-phase Total ...
