Overview This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance. Technical details Nominal output: 33,000 bph Control range: 13,200 - 36,300 bph Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pieces Total bottle cells: 7,860 pieces Bottle cells, loaded: 7,680 pieces Consumption Compressed air: 1m³ Steam (operation): 489 kg/ h Steam (heating): 4,430 kg/ h Electrical power: 48.4 kW Water: 7.35 m³/ h Bath volume Pre-soak: 2,263 l Pre-caustic: 7,240 l Caustic 1: 31,755 l Caustic 2: 350 l Hot water 1: 350 l Hot water 2: 350 l Cold water: 350 l
A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Operating hours: 5259, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: ...
청소기, 파브르. GM Gera, 타입: Arcade GEK2.1RV1, 시속 4,000bhp, 9b/row, 0.5lt NRW 병, 셀 피치 95mm, 프리스모크 포함, 부식성 욕조 1+2, 온수 욕조 1+2, 냉수 및 민수 분무, 2007년
청소기, 파브르. GM Gera, 타입: 아케이드, 24,000 bph, 제어 범위 7,600 - 26,400 bph, 25 bph, 케이지 피치 95mm, 체인 피치 140mm, Siemens S7 제어
GM Gera 병 세척 시스템을 사용할 수 있습니다. 1l 페트병 처리 용량: 13000병/h, 병 셀: 3240개, 바스켓 행당 셀: 18, 셀 피치: 110mm, 체인 피치: 169mm, 총 처리 시간: 약 15분, 총 침지 시간: 약 7.5분, 하우징 재질: 스테인리스 스틸(SST). 시스템 치수 X/Y/Z: 약. 8900mm/4200mm/3350mm, 무게: 약 23650kg, 작동 시간(09.2025): 약 14300시간. 문서를 사용할 수 있습니다. 현장 점검이 가능합니다. 2026년 3월 중순부터 출시 예정.
