We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usato
Cantina Soffianti di estrazione 1,8 kW
usato
Keller SMM 016,0 Soffianti di estrazione Diametro 160/160mm Portata d'aria 1200 Nm³/h 1,5 kW
usato
Cantina SMM 012.0 Soffianti di estrazione Diametro 120/120mm Portata d'aria 700 Nm³/h 0.55kW
usato
Portata volumetrica 2.000 – 3.000 m³/h Livello di pressione sonora < 75 dB L/W/H 1,4 m / 1,4 m / 2,0 m Peso 1.025 t Potenza richiesta 7,5 kW
usato
Description: Machine number: 502485 Operating voltage: 400 V Frequency: 50 Hz Connection: 5.5 kW Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 2,000 mm, weight approx.: 500 kg
usato
Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.
usato
Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES) ...
usato
Type: Vario T 1.0 L originates from LVD lasercutting machine power: 2,2 kW
usato
Dati tecniciTelocità mandrino: 1800 rpmAria aspirata: 20 m3/minTensione 50 Hz 3x: 400 VoltMotore di trascinamento (potenza motore): 1,1 kWPotenza : 2,7 Peso : 100 kgDimensioni : Lunghezza: 800 mmLarghezza : 550 mmAltezza : 1100 mm
usato
Capacità (x): 0 Applicazione del processo: 0 Altra informazioni: 0 Dati Tecnologia: 2850 rpm Aerespirata: 1000 m3/h Tensione 50 Hz 3x: 400 Volt Motore di guida (potenza motore): 1,5 kW Dimensioni: Lunghezza: 1200 mm Larghezza: 800 mm Altezza: 2300 mm
usato
Capacità (x): 0 Applicazione del processo: 0 Altre informazioni: 0 Dati Tensione 50 Hz 3x: 400 Volt Costanza installata: 0,55 kW Peso: 60 kg Dimensioni: Lunghezza: 650 mm Larghezza: 500 mm Altezza: 1100 mm
usato
sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.