sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 109)
diameter: 315 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed, high-quality, manual three-jaw chuck from the HI-GRIP® product line with an integrated quick-change jaw system.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. ram stroke: - mmthroat: - mmtable diameter: - mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
filling capacity: 40 lSuction height: 3000 mmwall strength: VA 3,0 mmtotal power requirement: 6/12 kW/Aweight of the machine ca.: 0,5 tdimensions: 1,63 x 0,68 x 1,24 mUsed centrifuge for coolants and washing media.- VA welded construction- Power connection V/A 400/16The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
coil weight: 30.000 kgband width: 300-1300 mmcoil outside dia.: 900-2.000 mm diameter of the mandrel: 570-630 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
mechanical: ja stroke: 180 mmcross-moving table: ja frequency: 50 Hzweight of the machine ca.: 1,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 1,5 tserial number: 4193 : ja vice: ja x-travel: 500 mmlength: 1200 mmwidth: 1300 mmheight: 1789 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
linear axis:: - travel -x axis: - mmweight max. in kg: - kgtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitudinal feed: - mmslides vertical travel: - mmgrip- and swivelling device: - weight max. in kg: - kgControl: Sinumerik total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSpecial price for pickup EXW / EX Foundation from the Osterburken siteLinear/gantry axis system in heavy-duty industrial designLong horizontal X-axis2 vertical linear axes / Z-axesTwo separate handling unitsRack-and-pinion drive on the horizontal axisServo motors and gearboxesPower transmission via energy chainsPneumatic components and gripper technologySensors and limit switchesComplete cablingSeparate industrial control cabinetSiemens SINAMICS servo drive technologyMultiple SINAMICS motor modules / power modulesSiemens industrial control and operator componentsOperator panel on the control cabinetSafety and switching technologyVarious decentralized I/O and fieldbus components ...
feed pressure: 9,8 bar: 2,39 m³/minNumber of working hours: ca. 85.410 htotal power requirement: 15 kWweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chucking diameter: 230 mm: 400 mm Axis: 2-Achsen Schwenkbar weight of the machine ca.: 60 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rockwell hardness: . brinell hardness: . weight: kgdimensions: mmHardness tester Rockwell measurementwith underframe table all technical data without guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 12 St.: ca. 90 kg: ca. 710x720x1000 mmdrawer measurements: 600 x 600 mmColour: 7035/5012 RALCabinet including assortment of dividersLarge drawer usable space Full extension drawers (VA) 100%8 drawers with internal height 40 mm2 drawers with internal height 70 mm,2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes3 drawers with rail dividers2 drawers with foam insertsBall bearing drawer runnersIndividual pull-out stopIndividual locking possible for each drawerCabinet without key!Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmburner heads: 1 Control: CNC workpiece weight: 1500 kgtraversing speed: 200 m/mintotal power requirement: 55 kWdimensions of the machine ca.: 10050 x 4920 x 2200 mmCUTTING CAPACITY:STRUCTURAL STEEL 40 mmSTAINLESS STEEL 40 mmALUMINUM 40 mmBRASS 16 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5-axis CNC machining center Type: DMU 40 eVo Manufacturer: DMG MORI Year: 2013 Control: Heidenhain iTNC 530 X: 400 mm Y: 400 mm Z: 375 mm B: -5•/+110• C axis Spindle speed: 18000 rpm Spindle taper: HSK 63 Max work diameter: 450 mm Max work height: 460 mm Max work weight: 250 kg Machine weight: 6900 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
CNC laser cutting machine Type: TruLaser 3030 Manufacturer: Trumpf Year: 2010 Control: Siemens Laser: TruFlow 2000 Laser power: 2000 W X: 3000 mm Y: 1500 mm Z: 115 mm Max. sheet size: 1500 x 3000 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
diameter: 35 - max. 65 mmGuide channels: 6 control: SPS max. bar length: 3.200 mmbar material dia.: min. 35 mmbar material dia.: max. 65 mmtotal power requirement: 2 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 4,0 x 1,1 x 1,6 mMulti-Channel-Bar-Feeding-SystemBREUNING IRCO - 65.6 196.6- has been installed at a Mori Seiki ZL 200 SMCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Find more here - .ucymachines/ Contact us at - sales@ucymachines1998ca. 7 t10.3 x 2.6 x 3.35 m
Manufacturer: OKUMA Model: Mac Turn 250 Rated Voltage: 400 V Number of Phases: 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Matec Model: matec-30HV Type of Machine: Machining Center) Year of Manufacture: 05/99 Technical Details: - X-axis travel: 2000 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - Spindle taper: SK-40 - Spindle speed: 9000 U/min - Rapid traverse: 30 m/min - Feed rate: 30000 mm/min - Control system: BOSCH, Typ 3 osa - Main Components: - Tool magazine: Alu-guss, 48 tool positions, SK 40 DIN 69871 - Table: 650 mm width x 2500 mm length - Chip conveyor with integrated coolant system Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Microcut Model: BNC-2240X Type of machine: Semi-CNC Lathe Year of manufacture: 2005 Condition: Good Technical Data - Accessories: Several tool holders are included - Main voltage: 220 Volt - Frequency: 50 Hz - Main motor power: 11 kW - Other motor power: 7.0 kW - Total power: Approximately 18 kW - Amperage: 28 Amps, 14 Amps, and 42 Amps
max. load: xxx kg0: 275x120x75 mmweight: 12 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. Control: FANUC Series 31i Model A Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6 chuck Speed up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° Milling spindle: Capto C5 interface Speed up to 12,000 rpm Chain magazine for milling spindle: 40 positions for Capto C5 tools Revolver: 16 tool positions Bar feeder Belt conveyor for finished parts workpieces. Tool holders Machine in good condition, fully functional. Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel: 3.500 mmy-travel: 2.600 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmtable weight: 15.000 Kgdistance between columns: 2.300 mmrapid travel x/y/z: 15/12.000 mm/minfeed: 5 m/minmilling head: Automatic Orthogonal UAGA milling head swivable ca.: 2,5 x 2,5 °spindle turning speed range: 3.000 U/minspindle drive: 22 kWtransmission ratio: 2 tool taper: ISO 50 Tools changer: 30 fach/toolshandwheel: HEIDENHAIN HR 410 total power requirement: kWweight of the machine ca.: 28 tdimensions of the machine ca.: m- Direct-Drive Spindle Head- Direct-Drive Spindle Speed 5,000 rpm- Automatic Retractable Support on the Right Side for Orthogonal UAGA Head - Automatic Retractable Support on the Left Side for Direct-Drive Spindle Head - Cover - Automatic Head Clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Laser cutting machine Type: ADILAS Manufacturer: BLM/ADIGE Year: 2008 Laser type: CO2 Power: 3500 W Number of tables: 2 interchangeable Working area: 6000 x 3000 mm Laser hours: 20,000 The generator was serviced at about 12,000 hours. Steel: up to 20 mm Stainless steel sheets: up to 12 mm Aluminum: up to 6 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Stiefelmayer 3D Horizontal Arm Coordinate Measuring & Marking Machine – 5000 x 1750 mm Plate Overview / Description: For sale is a high-precision, manual 3D horizontal arm coordinate measuring machine (CMM) and layout station manufactured by Stiefelmayer, complete with a heavy-duty cast iron surface plate (Spezialgußeisen) and Carl Zeiss IMT digital electronics. Ideal for large-part inspection, prototype construction, automotive cubing, and casting marking/layout tasks. Technical Specifications Measuring Plate / Bed (Stiefelmayer) - Manufacturer: Stiefelmayer - Plate Dimensions (L × W × H): 5000 mm × 1750 mm × 350 mm - Plate Material: Special Cast Iron (Spezialgußeisen mit Stahlzusatz) - Plate Weight: Approx. 5,800 kg - Surface Flatness: DIN 876/II (precision ground) - Base Supports: 10 × Height-adjustable cast iron levelling feet (Stützböcke, adjustable 370–470 mm) - W ...
