sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 109)
GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.
Rotary table wheel blast machine manufactured in 2006. This C.M. T-10 features a turntable diameter of 1,000 mm and a usable height in the workspace of 450 mm. It has a maximum permissible table load of 900 kg and operates with a blast wheel power of 5.5 kW. If you are looking to get high-quality blasting capabilities, consider the C.M. T-10 machine we have for sale. Contact us for further details.
This 5-axis JUARISTI 12/TS1.7 boring machine was manufactured in 1991. It features a substantial X-axis travel of 2000 mm, Y-axis travel of 1200 mm, and Z-axis travel of 1200 mm. The CNC rotary table dimensions are 1000 x 1200 mm, with a maximum table load of 6000 kg. If you are looking to get high-quality boring capabilities, consider the JUARISTI 12/TS1.7 machine we have for sale. Contact us for further details.
Additional technical specifications:• Diameter of storage surface: 50 mm• Incl. digital display• Incl. table booklet for hardness tests• with workbench
Content consisting of an attached vise, jaw width: 125 mm and various hand tools.
Macchina per fusione Frech DAW 125 F, BJ, 2007,
Macchina per fusione Frech DAW 125 S DV, costruita nel 1999,
Macchina per fusione Frech DAW 80F RC, costruita nel 2003,
A used sinker EDM machine is offered for sale. Equipped with F 100 filtration system. Inspection possible by appointment.
A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment.
This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details.
This 3-axis MAHR Compakt 400 was manufactured in 2001. It features optical and tactile measurement functionality, allowing for precise measurement of rotationally symmetrical components. The machine includes a rotary axis with a Sanyo Denki motor drive, a 6-position probe change rack, and multiple probe configurations. If you are looking to get high-quality measurement capabilities, consider the MAHR Compakt 400 CMM machine we have for sale. Contact us for further details.
This 3-axis TESA Scan 52 was manufactured in 2010. It features a diameter measuring range of 0.5 - 52 mm and a maximum workpiece length of approximately 300 mm. The machine is equipped for dynamic display of measurement results and non-contact optical measurement, making it suitable for both static and dynamic measurements. If you are looking to get high-quality optical measurement capabilities, consider the TESA Scan 52 optical measurement machine we have for sale. Contact us for further details.
Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg
DIBO ECN-L High-pressure cleanerManufacturerDIBOModelECN-LConditionuntestedLocation35614 Aßlar DELot6
Macchina di misurazione delle coordinate 3D Produttore: Wenzel CMM tipo Smarth Lastra di granito L x L x L 1640 x 700 Anno di produzione 2005 inclusi i manuali PC, manuale utente, software La macchina è in condizioni di usato, buone condizioni di funzionamento al 100%.
Workbench without contentsConditionuntestedLocation35614 Aßlar DELot27
Lot of collets 173 E consisting of various manufacturers, diameters see pictures, round, square and hexagonal.
• 1 x BERG, type: KH 250, diameter: 250 mm• 1 x SCHUNK, diameter: 165 mm• incl. clamping jaws and a special chuck
Consisting of SCHUNK clamping jaws, various types and sizes, 2- and 3-piece sets, with T-nuts and screws as well as reduction sleeves in various sizes.
With mounted vise, jaw width: 125 mm, with inventory of two cordless screwdrivers, hand saws, brushes, files and cutting discs.
Content consisting of a mounted vice, jaw width: 125 mm as well as various turning tools, indexable inserts, hand tools
Adapters for HSK and SK 50 as well as SK 40 tool holdersAdditional technical specifications:• Operating pressure: 4 - 6 bar• Frequency: 50/60 Hz
GARANT 363010-125 5-Axis Clamping SystemManufacturerGARANTModel363010-125ConditionuntestedLocation63843 Niedernberg DELot70
In various designs and sizes, predominantly from the manufacturers SFT and LENZKES.
80 € 
