sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 1200)
akvoFloat is a system for wastewater treatment, especially for removing solids and oilfrom old emulsions and wash water.
Plate heat exchanger with marine grade steel clamping device and titanium plate pack.
The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers,The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available.- Station 2: post-cleaning with ultrasound in heated cleaning liquid.- Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid.- Station 4: pre-drying with heated air.- Station 5: Post-drying with heated air.- Control: Siemens SPS S7-200
PE storage tank completely closed with lid. The containers are seamlessly manufactured from high-quality polyethylene in a rotational melting process.
The structure of the system:Fixed tank module, transfer module in which the chemical is pumped to a delivery point and on the other hand, the chemical delivered in the IBC module is transferred to the fixed tank.
Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network.The system is of very high quality and can be used for many chemicals.1x compressed air diaphragm pumps Almatec A15 TTT / 1x Almatec A15 TTZ / 1x Almatec A10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.
PP adsorberPrevious use for H2S.Can be filled with approx. 60kg activated carbon.PP grid plate for a fleece (not available) as separating layer.Chimney with weather bonnet.
Huber Rotamat RO2 as fine screen version and with EX-protection, spray nozzles and automatic press zone flushing. The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings. Range of application:- Wastewater treatment plants (municipal and industrial) The machine had its last application in a municipal wastewater treatment plant.
Extraction cabinet made of stainless steel equipped with PTFE-Pipes, drip pan and a membrane diaphragm pump. Former use as a storage for dangerous chemicals.
PE storage tank without lid. The containers are seamlessly manufactured from high-quality polyethylene in a rotational melting process.
Double softening system consisting of:- 2 GRP pressure vessels (Pentair)- 2 control heads (1 control head must be renewed)- 1 sole tank- Control unit MMP 81 (Gebrüder Heyl)- Piping with pneumatic diaphragm valvesThe plant is dismantled and stored in Warburg.
Deltapilot level meter from Endress + Hauser. for hydrostatic level measurement in rod design made of stainless steel
The system consists of a stainless steel vessel with a boiling and condensation chamber. It is equipped with defoaming, sight glass with lighting and cleaning.Furthermore, a concentrate pump, distillate pump and a vacuum pump as well as a piston compressor are available.
800-chamber filter press with motor hydraulics, closed filtrate drain and automatic plate displacement. When the filtrate drain is closed, the filtrate runs through channels within the plate pack to the connections on the fixed stand.
Plate heat exchangers coated with tensioning device made of steel and plate pack of stainless steel
complete light curtain systems consisting of one sender unit FGSS, one receiver unit FGSE.
System separator type BA298-80To protect water systems against backflow, back suction and back pressure of liquids. The system separator according to the three-chamber principle consists of two non-return valves, a drain valve and three ball valves for connection of a differential pressure manometer.
