Presse idrauliche (112)

CONTROLLA le FORZE di pressione convenzionali forza totale (nominale): 160 toPRESS TABLE superficie (sinistra-destra): 1000 mm superficie tavolo (anteriore-posteriore): 850 mm Corsa slitta: 705 mmDIMENSIONI DELL'ASSEMBLAGGIO UTENSILE altezza di chiusura (corsa verso il basso, regolazione verso l'alto), BDC: 1205 mm Ore della macchina: 78571

LOIRE SAFE Hydraulic Press – High-Performance System for Tooling and Heavy Forming ApplicationsThis high-performance hydraulic press, designed in a rigid 4-column portal frame construction, is ideally suited for demanding applications in toolmaking (tryout / spotting) as well as large-scale forming operations. The stress-relieved welded structure ensures maximum rigidity and long-term process stability.The machine is equipped with three main cylinders and a multi-cylinder parallel control system, achieving high repeatability in the range of ±0.1 mm. The powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approx. 450 bar, delivering both precision and high pressing force.Control is handled via a Siemens S7-317F PLC combined with servo-controlled axes (Rexroth MLC) and visualization through Siemens WinCC. This setup enables fully progr ...

Pressione: 150 corsa: mmDistanza tra tavolo / ram: 660 mm Superficie del tavolo: 1500 x 610 mm Altezza del tavolo sul pavimento: mm Diametro della guarnizione: 150 mm R-L-H: 1,7 x 1,5 x 2,3 m-peso della macchina ca.: tC-frame - foro di pressa nella tabella 120 mm I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 710 mm  table surface (front-back): 560 mmSLIDE  slide force: 100 to  table surface (left-right): 560 mm  table surface (front-back): 450 mm  spigot hole diameter: 50 mm  stroke: 320 mm  thickness of bolster plate: 150 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 340 mm/s  working velocity max.: 32 mm/s  return velocity max.: 330 mm/sSLIDE EJECTOR / CUSHION  nominal force: 2 to  stroke: 40 mmDIE CUSHION (TABLE CUSHION)  cushion force: 10 to  stroke: 80 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 455 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mm  sheet thickness max.: 20 mm  spee ...

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmELECTRICAL SPECIFICATIONS  total power consumption: 60 kWDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion plate surface (front-back): 1450 mm  working principle: hydraulical TOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm   ...

pressione: 630 tdiametro: 320 mmcorsa: 310 mmpotenza totale richiesta: kWpeso della macchina ca.: 3500 tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnace system:- Natural gas heat ...

DESIGN  DELLA PRESSA sistema di azionamento: idraulico   design del telaio: telaio a C, su un lato FORZE DI  PRESSATURA forza totale (nominale): 12 aCORSA SLIDE  : 200 mmSPECIFICHE ELETTRICHE  tensione di rete: 380 V  frequenza di rete: 50 HzDIMENSIONI / PESI  peso totale circa: 1000 kgContaore: 30'181 hultimo controllo di sicurezza: 27.07.2023, tempo di inerzia 38 ms, distanza di inerzia 60 mm

pressione: 250 tdistanza tra le colonne: 0 mmcorsa: 0 mmpotenza totale richiesta: 0 kWpeso della macchina ca.: 0 tdimensioni della macchina ca.: 0 m

pressione: 63 tdistanza tra le colonne: 0 mmictus: 160 mm superficie abitabile: 630 x 500 mmdayligth: 400 mmpoteno di potenza totale: kWpeso della macchina ca.: 5 tdimensioni della macchina ca.: m

pressione di chiusura: 4360 kNmodifica tabella: 730 x 730 mmcontrollo: B+R Industrieelektronik repressione di prelievo: 190 kNve velocità di regolazione: max. 60 mm/secvempienza di ritorno: max. 90 mm/secilluminazione tra le colonne: 900 mm= pressa vulcanizzante con unità di chiusura verticale, con dispositivo di rimozione della forma e separazione della forma