Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998
Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,
Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002
Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE ...
Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999
A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a one-man operation, where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/S ...
Macchina per la banda dei bordi Tipo: Optimat KDF 230 AT Produttore: Homag Anno: 2017 Macchina in buone condizioni, sotto alimentazione Trova di più qui - / Contattaci a -
Macchina per la banda dei bordi Tipo: KAL370 Ambition 2274 Produttore: Homag Anno: 2016 La macchina dispone anche di airTec per il bordo laser e il bordaggio con colla pura. Macchina in buone condizioni, sotto alimentazione Trova di più qui - / Contattaci a -
Unità di ricambio per fresatura di contorni HOMAG
Unità di lucidatura oscillante HOMAG
Manufacturer: Homag Verleimteil gebraucht, Type: Q 34, Year: 1996, FREITEXT1: vorhanden für linke und rechte Seite, FREITEXT2: 2 Linke Seite/2 rechte Seite, Year :1996
Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,
Manufacturer: 2 Stück Kantenschleifaggregate KS 10 Homag, Spare part from machine: KS 10, Kantenschleifaggregat: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,
Manufacturer: Homag Tellerwechsler, Year: 1999, Type: 8 Fach Wechsler, Length mm: Ersatzteil aus Weeke 195 T, Year :1999
Manufacturer: Bohrgetriebe, Stück Bohrgetriebe : 1, Number of drilling spindles: 13, Grid 32 mm: yes,
Manufacturer: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren- Fälzen und Kaliberieren, Herstellung von: Innentüren, Work piece width min-max mm: 1300 X 2200, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 50-2200, Manufacturer1: Bargstedt, Machine type1: Beschickungsanlage doppelseitig, Year of manufacture1: ca 2000, Manufacturer2: Viet Kalibrieranlage, Machine type2: 4 Aggregate Walze/Schuh, Year of manufacture2: ca.1998, Manufacturer3: Homag Doppelendprofiler, Machine type3: Längsprofilerer, Year of manufacture3: Überholt 2004,
Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005
Manufacturer: Homag Siemens Achskarte Drehgeber, Type: ser 8808 B, Model: Drehge. Interface,
Manufacturer: Siemens Elektronikkarte 03410, Type: 3818, Model: 548 229 9001, Serial number: A 8605 590 700,
Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,
Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004
Manufacturer: Indramat Motor mit Getriebe Atlanta, Year: 1999, Type: MAC93C-0-FS/4HC/110-A-0, Kw output: ca.10, Bauart Flanschmotor: yes, Preis pro Stück Euro: 1500, Available: sofort, Year :1999
Manufacturer: Homag Radiusziehklinge, Ausführung links: yes, Radiusziehklinge: yes, Tracing by roller: yess, Wechselstähle: yes, Wendemesser: yes, ziehend: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes, Zustand: gut, Available: sofort,
Manufacturer: Homag Ziehklingenaggregat, Ausführung rechts: yes, Radiusziehklinge: yes, Steuerbar: no, Tracing by roller: yes, Wechselstähle: yes, Wendemesser: yes, Radien 2/3 mm: yes, Automatischer Radienwechsel: no, Ständeraufbau: yes, Kettenbahn/Oberdruck: yes,
Manufacturer: Homag KF, for right machine side: Geräteträger mit Verstellung, Number of motors: für linke und rechte Seite, Motor : komplett mit Aggragaten, kW-Leistung : und Verstelleinheit,
Manufacturer: Homag KF, Year: 1996, FREITEXT1: Asrichtlineal rechts, FREITEXT2: gesteuert, FREITEXT3: 8 Positionen verstellbar, FREITEXT4: länge 1400, FREITEXT5: mit Halter Maschinebett, Year :1996
Manufacturer: Homag Verleimteil gebraucht, Type: Q 34, Year: 1996, FREITEXT1: vorhanden für linke und rechte Seite, FREITEXT2: 2 Linke Seite/2 rechte Seite, Year :1996
Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007
