Fabricante:
(Categoría: 106)
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 €: 148.61 €: 100 to: fix : 900 mm: 1050 mm: 1900 mm: 850 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 8600 €: 165.98 €: 100 to: horizontal verschiebbar : 900 mm: 1050 mm: 1900 mm: 1000 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 €: 240 €: 150 to: fix : 150 mm: 780 mm: 1000 mm: 1900 mm: 1200 mm: 2450 (PSS: 2600) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 17850 €: 342.72 €: 100 to: fix : 1020 mm: 300 mm: 1020 mm: 680 mm: 9 mm/s: 5 mm/s: 10 mm/s: 6 mm: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2275 mm: 2082 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel AND FOOT PEDALTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POSIBLE RETIRO A PARTIR DE SEPTIEMBRE DE 2026 Auction-ID: A7-50524-900
Distancia entre las columnas frontales 2100 mm y distancia entre las columnas laterales 1100 mm. Tamaño adicional de la mesa 1820 × 1500 mm. Diámetro del cilindro 250 mm. Tamaño de la mesa principal 2600 x 1800 mm. Incluyendo controlador de temperatura REGLOPLAS 300LD Auction-ID: A7-50524-927
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 €: 1756.41 €: 175 to: 3050 mm: Y1 / Y2 / X und R-Achse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 100 mm/s: 650 mm: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 18.5 kW: 4250 mm: 1700 mm: 2850 mm: 10900 kg4axes (Y1, Y2,X and R)Color graphics control Delem DA 66 S- 2D graphical touch screen programming mode- 3D machine representation, in simulation and production- 24", high resolution color TFT- Delem Modusys compatibility (module scalability and adaptivity)- USB, peripheral interfacing- User specific application support within the control&apos,s multitasking environment- Sensor bending &, correction interface- Profile-S2D offline softwareservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A ...
pressure: - tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4000 tstroke: 380 mmdayligth: 1050 mmdistance between columns: 1580 mmtable-size: 1520 x 1600 mmdimension of ram: 1470 x 1500 mmram adjustment: 15 mmstrokes of ram per min.: 50 ejector path: 31 / 70 mmmain drive: 200 kWheight over floor: 7520 mmtotal power requirement: ca. 250 kWweight of the machine ca.: 245 tdimensions of the machine ca.: 4,4 x 4,6 x 7,5 mcomplete forging line includes an - Smeral Hot Forging Press- induction heater- Manyo 460-millimeter forging roll- manipulator with forging roll link- SMERAL 500-ton trimming pressThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 50 mmbending angle max. +/-: 180 °bending radius max.: 350 mmbending speed: 3 U/minmotor speeds:: 2815 U/minbending radius max.: 350 mmbending angle max. +/-: 180 °tool taper: Sechskant 40 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,1 tMachine Type Electric Bending MachineModel 6000-SPower Connection 3-phase 400 VControl System JUTEC electronic, programmable bending control with display and membrane keypadOperation Foot switch for clockwise/counterclockwise rotation and bending operationDesign Mobile machine on swivel castersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: ca. 60 mmtool taper: Sechskant 40 mmbending device: horizontal bending speed: 3 U/minweight of the machine ca.: 120 kgtotal power requirement: 2,2 kWElectronic bend angle controlDigital display and keypadOperated via dual foot switchesMandrel-less bendingMobile machine basePipe diameter range likely up to Ø 60 mmTool mounting via hexagonal shankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 93 ( 100 ) tstroke: 165 mmtable surface area: 990 x 400 mmtotal power requirement: 1 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 2 x 1 x 2,2 / 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 €: 849.95 €: 1 : 40 to: 4 mm: 630 mm: 450 mm: 160 mm: 3 - 75 mm: 154 1/min: 420 x 275 mm: 8 : 75 mm: 40 mm: 230 mm: 293 mm: 4 kW: 1174 mm: 1540 mm: 2200 mm: 2850 kg8-fold ram guide2-hand control panel and foot pedalAutomatic central lubricationFront light guardVibration padsUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 135 tchamfer lenght: 3600 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmajustment speed: 70.0 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/sec: 315 bardayligth: 400 mmtable height: 915 mmcolumn arm: 250 mmengine output: 15.0 kWweight: 8800 kgrange L-W-H: 4200 x 1700 x 2600 mmEquipment:- Electro-hydraulic press brake with torsion bar- HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs- Swiveling control panel (front left)- NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers- NC motorized depth adjustment (Y-axis)- 1x set of sectionalized gooseneck (swan-neck) upper tools- 1x rotatable MULTI-V die block- Rear safety guard (sliding door) ...
pressure: 60 tthroat: 280 mmstroke: 10-90 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 750x540 mmram surface: 600x200 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø35 mmweight of the machine ca.: 3,7 tdimensions of the machine ca.: 1800x1800x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tstroke: 380 mmtable-size: 800 x 700 mmworking speed:: mm/ sec.return speed: mm/secwork height max.: mmtotal power requirement: 4,0 kW: 90 mmweight: 2,5 tdimensions: 2,2 x 1,4 x 1,6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Prensa manual de pórtico 20 toneladas Dimensiones totales: 1200 x 800 x 500 mm Peso: 100 kg Auction-ID: A7-50066-418
Capacidad 4 toneladas, manual, nunca usado Dimensiones totales: 500 x 400 x 800 mm Peso: 50 kg Auction-ID: A7-50066-347
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 400 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/minreturn speed: 165 mm/secwork stroke: ca. 350 mmdayligth: ca. 660 mmoil volume: 450 ltr.table height: 830 / 950 mmtable width: 75.0 / 60.0 mmvoltage: 400 Volttotal power requirement: 18.5 kWweight: 13440 kgrange L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request------------------------------------------------------ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm------------------------------------------------------ in checked condition - machine video -https://www.youtube.com/watch?v=chgCaXLnpa8Equipment:- CNC electro-hydraulic die/press brake- CYBELEC CNC control DNC 880 S swiveling control panel, front right 2D graphic ...
pressure: 170 tchamfer lenght: 3170 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 620 mmstroke: 350 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secoil volume: 280 L0: 300 barcontrolled axis: 7 AnzahlNumber of working hours: ca. 51.500 htotal power requirement: 16.5 KWweight of the machine ca.: 12700 kgrange L-W-H: 4550 x 2650 x 3150 mm LONG STROKE special version Excellent condition () Original price approx. 200.000 Euro Special price on request----------------------------------------------LONG STROKE electro-hydraulic press brake featuring: Increased daylight opening (installation height) = 620 mm Increased cylinder stroke = 350 mm----------------------------------------------Equipment:- Electro-hydraulic CNC press brake- AMADA CNC control AMNC - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) Swiveling control unit - front left Touchscreen control panel ...
pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kg very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinder = double-acting cylinder- upper ...
pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmdayligth: 425 mmthroat: 300 mmworking feed: 9.0 mm/secreturn speed: 90.0 mm/secwork height max.: 980 mmback stop - adjustable: ca. 700 mmControl: PPS-TS Touch oil volume: 350 ltotal power requirement: 18.0 kWweight: 12.000 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__sEquipment:- CNC electro-hydraulic press brakes- with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left)- CNC-controlled axes: Y1/Y2 + X- CNC motorized backgauge (X-axis) with 4 manua ...
pressure: 40.0 tchamfer lenght: 1250 mmdistance between columns: 890 mmwork stroke: 100 mmdayligth: 300 mmcolumn arm: 200 mmtable width: 140 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 90.0 mm/sectank: 63.0 ltotal power requirement: 3.0 kWweight of the machine ca.: 2000 kgrange L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!)Features:- conventional hydraulic press brake- swiveling control unit (front left)- electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds)- manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator- 2x manually adjustable gauge fingers (R + Z axes)- 1x upper tool- 1x reversible universal die block- pressure gauge / pressure indicator- 1x mobile control unitThe data for this ad was created w ...
: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 8800 €: 169.84 €: 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTIONS (PRICES ON REQUEST):Handwheel and fixingbolt for cylinderadjustment1 pair of V-blockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmEquipment:- robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Including round steel chain and 2x locking bolts Piston rod with metric mount- 1x set of V-block prism support- Pressure gauge for pressure display- Simple manual operation with : 1x feed speed 1x working speed 1x retraction speed- piston can be stopped in any position- Hydraulic tank permanently mounted on the side- operating inst ...
7.500 € 
