Key data: 330 mm, 1000 mm, 330 mm
Longitud de giro: 1.000 mm Diámetro de giro: 330 mm sobre la cama 160 mm sobre carro transversal Paso del husillo: 52 mm Velocidades del husillo: 70 - 2.000 rpm Equipado con: - 1x bisel fijo, 1x bisel giratorio - Teorema de Zahrade - Palet de sujeción - Protección del mandril de la mejilla - Dispositivo de refrigeración País de origen: Países Bajos Máquina L x An x Al: 1.800 x 650 x 1.400 mm Peso de la máquina: 750 kg
Key data: 25 mm, 225 mm, 150 mm
Capacidad de perforación acero: ø 25 mm Dimensiones de la mesa: ø 390 mm Adaptador de husillo: MK3 Velocidades del husillo: 100 - 2900 rpm. Carrera del husillo: 150 mm Proyección: 225 mm Equipado con: - Protección contra taladros -Perforación País de origen: Países Bajos Potencia del motor: 0,75 kW Máquina LxAxA: 700 x 700 x 1800 mm Peso de la máquina: 300 kg
Ancho de la lámina: 1270 mm Grosor de la placa: 2,0 mm Distancia entre columnas: 1295 mm Apertura de luz: 46 mm: 135 Consumo total de potencia: Handbetrieben Peso de la máquina aprox: 0,4 tDimensiones de la máquina aprox: 1,6 x 0,8 x 1,2 m Máquina de flexión de segmentos, nueva. Anchos de segmento: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm. Incluyendo el tope del material, máximo 660mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
Capacidad de diámetro en acero (diámetro): 40 mm garganta: 230 mm carrera de diámetro: 130 mmtaper MK: 4 MKtamaño de la tabla: 400 x 315 mm de giro: mm/Velocidades de giro: 105 - 1257 U/min Requisito total de potencia: 2,55 KWpeso de la máquina aprox.: 0,35 tdimensiones: 0,8 x 0,6 x 1,95 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
nuevo
cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...
capacidad de perforación en acero (diámetro): 32 mmgarganta: 265 mmcarrera del orificio: 150 mmtaper MK: 3 MKtamaño de la mesa: 390 x 390 mmavances: mm/velocidades de giro: 100 - 3300 U/minpotencia total: 1,5 KWpeso de la máquina aprox.: 0,35 tdimensiones: 0,8 x 0,6 x 1,95 mPantalla no utilizada con:- Accesorio de corte de roscas- Velocidad variable del husillo- Sistema de refrigeraciónLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
Ancho de la chapa: 1020 mmEspesor de la placa: 2 mmDistancia entre columnas: 1020 mmÁngulo de plegado máx.: 135 Potencia total requerida: 0 kWPeso de la máquina aprox.: 0,3 tDimensiones de la máquina aprox.: 1350 x 850 x 1175 mMáx. ángulo de flexión 135Accionamiento manual con muelle auxiliar en ambos lados. Apertura de la viga superior 40 mm,Vigas superior e inferior segmentadas,División de segmentos: 25-30-35-40-45-50-75-100-150-200-270 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.
cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 320 mm cutting capacity - flat: 320 x 300 /90° mm cutting capacity - round: 320 / 90° mm cutting capacity - square: 300 / 90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2,8 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2100 x 1300 x 850 mm Features: • Inverter for adjustable speed • hydraulic lifting of the saw arm • automatic stop after sawing operation • manual saw blade tension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacidad 90 grados: redonda: 250 mm Capacidad 90 grados: Cuadrada: 240 mm : Longitud de la cinta de sierra: 2965 x 27 x 0,9 mm Altura de la mesa: mm Velocidad de la banda: 37 / 76 m/min Potencia total requerida: 1,0 kW Peso de la máquina aprox.: 0,38 t Dimensiones de la máquina aprox.: 1,0 x 1,6 x 1,4 m Sierra de cinta de doble inglete
Características técnicas: - Dimensiones de la hoja de sierra: 315 x 2,5 x 32 mm - 2 velocidades de husillo de hoja de sierra aprox. 40 + 80 rpm - Rango de corte a 90° alrededor de 95 mm - Plano 110 x 70 mm - a 45° alrededor de 90 mm - Plano 85 x 70 mm - Inglete ajustable izquierda + derecha hasta 45 ° - Tornillo de banco de material - Accionamiento 400 V / 0,75 / 1,3 kW - Necesidad de espacio aprox. 700 x 700 x 700 mm - Peso aprox. 200 kg
Number of tools: 156 St. 0: Handwerkzeuge : 6 St. weight: 55 kg range L-W-H: 840 x 480 x 760 mm The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ancho de las tiras: 75 mm Longitud de la banda: 2000 mm Velocidad de la banda: 37 m/min Requisito de potencia total: 3 kW Peso de la máquina aprox.: 0,084 t Dimensiones de la máquina aprox.: 1x0,5x1 m
Ancho de las tiras: 75 mm Longitud de la banda: 2000 mm Velocidad de la banda: 37 m/min Potencia total requerida: 3 kW Peso de la máquina aprox.: 0,11 t Dimensiones de la máquina aprox.: 1x0,5x1 m
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 t stroke: 400 mm table surface area: 800 x 500 mm feed down: 4,03 mm/sec feed up: 5,82 mm/sec column daylight: 820 mm oil pressure max. in the work cylinder: 400 bar oil volume: 26 l voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Longitud de la placa: 1550 mm Espesor de la placa: 3,5 mm Número de rollos: 3 Diámetro del rollo: 120 mm Potencia total requerida: 2,2 kW Peso de la máquina aprox.: 750 Kg dimensiones de la máquina aprox.: 2,2 x 1,5 x 1,6 m Rodillo redondo accionado eléctricamente a través de la palanca de pie,Robusto soporte de construcción soldado,Rodillo trasero ajustable para flexión cónica, Los rodillos están endurecidos, El rodillo superior se puede girar para retirar la pieza de trabajo.
bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm thread dia.: M 24 mm feeds: 0,1 - 0,2 mm/U spindle turning speed range: 100 - 1450 U/min spindle taper: MT 4 table surface area: 560 x 385 mm Distance spindle/table max.: 780 mm distance spindle/base plate: 1320 mm voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 460 Kg dimensions of the machine ca.: 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grosor del papel de lija: 1,3 mm Ancho del papel de lija: 41 mm Longitud del papel de lija: 6280 mm Paso de afilado: 6 mm
saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: 810 mm cutting capacity - flat: 480 x 850 / 45° mm cutting capacity - round: 480 / 45° mm speed: 20 - 100 m/min sawing motor: 4 kW total power requirement: 6 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 3000 x 1200 x 2350 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de chapa: 2020 mm pulso de placa: 2 mm distancia entre columnas: 2030 mm ángulo de inclinación máx.: 135 queque de potencia total: - kW peso de la máquina ca.: 1,22 t dimensiones de la máquina ca.: 2,5 x 1,0 x 1,4 m
turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw ...
rango de corte: 90: 90 mm cuerva de corte: 45: 75 mm Diámetro de la hoja de sierra: 315 mm Tamaterias de la mesa: 800 x 500/400 mm Pasa de sierra: 30 mm peso de la máquina ab.: 45 kg dimensiones: 850 x 600 x 430 mm
