turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,511,5 m No. 5291 1 used lead and feed spindle lathe WEILER Commodor 75 GS working range: Ø 380/190 x 1000 mm drive: 7,5 kW digital display spindle bore 56 mm Speed range 13 - 2000 min-1 3-jaw chuck Multifix B Chip tray documentation Space requirement approx. 2.5 x 1 x 1.5 Weight approx. 1700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teachin ...

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametric ...

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5+1+1,8 m Movie: https://www.youtube.com/watch?v=ckpr4-sE7K4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m WEILER Bundle - RDU - LZ 330 - 2 x Commodor - UD 24 - DZ 67 V3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg