used HOMAG CPU

Manufacturer: Homag, Type: CPU Umlade-RAM 512 I/O, Serial number: 2-083-01-5004, Systemconfiguration: PC Steuerung CPU , Year: 1992, Year :1992

Manufacturer: Homag CPU, Type: CPU HC020 SPS II, Serial number: 2-083-01-50-60, Systemconfiguration: V:4.66a,

Manufacturer: Homag, Type: CPU PC Controlleinheit, Model: 5003, Serial number: 2-083-01-6902,

Manufacturer: Homag, Type: CPU Karte, Year: 1996, Year :1996

Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,

Manufacturer: Homag, Type: Konvertierungskarte CPU/30/E16 4 x RS, Serial number: 4-086-05-0241, Year: 19.10.1994 K.kraft, Year :19.10.1994 K.kraft

Manufacturer: Homag CPU SPS CPU, Type: Homatic, Serial number: 2-083-01-5057, Systemconfiguration: 2-083-01-5020 REV02, Year: 11/94, Year :11/94

Manufacturer: Homag CPU SPS-II, Type: Homatic, Model: PC-Controller, Serial number: 2-083-01-5053,

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Manufacturer: Homag CPU SPS-II, Type: 1 MB RAM und PC Cobtroller, Serial number: 2-083-01-5043, Year: 93, Year :93

Aggregate for 4-Achs CNC to the extension for the 5-th axis

Aggregate for 4-Achs CNC to the extension for the 5-th axis

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

Edge gluing machine - see picture Next: Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

ID-Nr. 1-056-11-0400

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.