used HIDROKAR HAP

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

pressure: t chamfer lenght: mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Durma Type: HAP 35200 Capacity: 200 T Bend length: 3.550 mm Distance between columns: 3.100 mm Stroke: 185 mm Machine dimensions: 2.400 x 4.800 x 2.850 mm mm Machine weight: 13.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer Durma Model HAP 2035 35 Ton 2000 mm Machine is in good condition

Folding length : 3100 mm 120 Ton Machine is in good condition

Durma HAP 30200 NC Press Brake Folding length : 3000 mm 200 Ton

Complete with motorized rear stop and press depth setting. Quite a lot of new tooling, hand tools and instruction book (The rack where You see the tooling is not included)

Bending length : 3100 mm 80 Ton Cybelec control unit

Bending length : 3000 mm 200 Ton Control unit : Cybelec Machine is in good condition

Ä°nanlar CNC HAP 435 60/51 ABKANT PRES Bending length : 6100 mm 435 Ton Tools are additional cost

120 Ton 3000 mm Motorized crowning Number of axis : 4 Machine is in good condition

: gebraucht : 1995 : 8276 : prompt, Zwischenverkauf v : Türkei : 22500 € nachgerüstete Digitalanzeige Maper HT072 Gleichlauf über Torsionswelle 2 Hinteranschlagfinger 2 vordere Auflagearme seitliche und hintere Schutzgitter, 2-Hand und Fuß Bedienpult 1 Multi V Matrize 3100x100x100mm 1 Matrize 3100x80x80 mit 1 V (V16, 30°) 1 gekröpftes Oberwerkzeug 3050x130x44, in 2 Teilen 1 gekröpftes Oberwerkzeug 3050 x 130 x 50, geteilt 1 gerades Oberwerkzeug 3050x120x34mm 30° geteilt Betriebsanleitung DEUTSCH ENTSPRICHT DER DEUTSCHEN UVV &, ÖSTERREICHISCHEN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding tap pointer: . tube diameter: 5 - 20 mm tag length: 50 - 100 mm total wight: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 160 ton Bending length: 3,050 mm Stand width: 2,550 mm Backgauge: 650 mm Bending speed: 9 mm/sec. Return speed: 86 mm/sec. Stroke length: 175 mm Projection: 350 mm Equipped with: - Light cabinet - Crowning - Press brake tools - Side and rear protection Motor power: 15 kW Machine LxWxH: 4250 x 2170 x 2800 mm Machine weight: 9200 kg

pressure: 120 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 155 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9,0 mm/sec return speed: 77,0 mm/sec Control: ENC 310 work height max.: 878 mm table width: 104 mm oil volume: 150 l total power requirement: 11,0 kW weight: 7260 kg range L-W-H: 4150 x 2150 x 2600 mm ** New price ~ 50.000 euros ** from a maintenance workshop - good condition (!!) Furnishing: - DURMA NC control Mod. ENC 310 * 128x64 pixel LCD display, illuminated * 30 programs with 20 steps each * manual / semi-automatic / automatic mode of operation - pivoting control, front left - controlled axes : Y1 + Y2 + X - electric back gauge (X axis) - 2x manually adjustable stop fingers * including lateral and height adjustment (Z+R axis) - FIESSLER laser safety device at the front - Upper tool holder, with crowned upper wedge & quick-ch ...

cutting diameter: 800 mm saw band length: 8500 x 54 x 1,6 mm cutting width: 1000 mm cutting capacity - flat: 800 x 1000 mm cutting capacity - round: 800 mm cutting capacity - square: 800 x 800 mm speed: 15 - 100betrieb m/min operating pressure: 50 bar operating pressure: Spannbacken -40 bar operating pressure: Bündelspanner - 6-15 bar sawing motor: 11 kW hydraulic motor: 1,5 kW voltage: 400 V / 50 Hz total power requirement: 13,4 kW weight of the machine ca.: 3800 kg dimensions of the machine ca.: 4100 x 1300 x 2450 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 91102 THE MACHINE CAN BE VIEWED AT THE LOCATION D- 99868 GOTHA BY APPOINTMENT. Specifications: - Pressure capacity 80 t - Working width 2520 mm - Passage between the uprights 2150 mm - Table width 220 mm - Projection 240 mm - Installation height approx. 400 mm - Plunger stroke 160 mm - Working height approx. 900 mm - Engine power approx. 11 kW - Oil filling approx. 120 l - Space requirement approx. W 2750 x H 2400 x D 1900 mm - Weight approx. 6000 kg - with: - Swivel arm – control panel with CNC control CYBELEC -Mot. Backgauge with height adjustment - V – die + split upper tool incomplete - Two-hand control panel, foot switch,

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

15 KW

pressure: 160 t chamfer lenght: 3550 mm stroke: 200 mm quantity of oil: 150 l weight of the machine ca.: 11400 kg dimensions of the machine ca.: 4700x2100x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hezinger HAP2E Combi Plasma Cutting System, Year of construction 2016, Control ECK 872, Travel 1500 x 3000 mm, Harris oxy-fuel torch and Smart Focus 200 plasma source, Auto. gas control, Cutting current up to 200 A, Marking ron up to 50 A, Burner holder with 3 nozzles, Height control, DXF capable, 3100 on-duty hours, 323 hours of work,

Band saw Prvomajska HAP280 Maximum cutting diameter: 280 mm The possibility of working in a machine Total power: approximately 4 kW Tape dimensions: 3660x25x0.9mm Weight: approx. 1500 kg Dimensions (length / width / height): 2000 mm / 2000 mm / 2000 mm

AGFA AccuSet 1500 plus with AGFA OLP and AGFA PDF-Rip for Windows. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now