used HIDRALMAC PH

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

pressure:400 t passage width:600 mm stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm

pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung ...

pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil Tank Capacity:150 l

pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

pressure:40 t stroke:500 mm total power requirement:5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:2950 x 1300 x 2000 mm return capacity:6 t work height max.:700 mm pre-running speed:250 mm/sec :20 mm return speed:200 mm/sec pestle plate:500 x 400 mm table plate:600 x 450 mit T-Nuten mm Table cut-out:150 mm Durchmesser table height:1000 mm :200 l Oil Cooling:elektrisch light-barrier:700 mm

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil tank capacity:150 l

pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:56 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working feed:0 - 10 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)