used HACO PP

HACO PPES 30135 5-AXIS CNC press brake was built in 1991 in Belgium. The machine operating with a press force of 135 tonnes performs precision bending of workpieces with a maximum width of 3000 mm. Machining is performed in five axes, which are controlled numerically (Y1, Y2, X, R axes) and by voltage potentiometer (Z axis). Among the extensive equipment on the press there is a CYBELEC DNC 60 CNC controller, DSP LASER light curtains to prevent entry of the operator into the working area and PROMECAM hydraulic top tool clamping. The press brake was continuously serviced and upgraded – during use, the control cabinet with four-axis controller was replaced and the machine’s upper pistons were reconditioned. Technical parameters of the HACO PPES 30135 CNC press brake - maximum press force: 135 t - CNC controller: CYBELEC DNC 60 - number of numerically controlled axes: 4 (Y1, Y2, ...

Haco - Com PPM 220 ton x 4100 mm CNC Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 80 mm Working speed: 9 mm/sec Returning speed: 80 mm/sec Electric motor (power): 25 HP Length: 5400 mm Depth: 2400 mm Height: 2800 mm Weight: 16 ton

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm stroke: 130 mm dayligth: 325 mm throat: 250 mm working feed: 10,0 mm/sec return speed: 100 mm/sec table width: 180 mm work height max.: 865 mm Control: M 9101 oil volume: 225 Liter engine output: 11,0 kW weight: 11.500 kg Dimensions (LxWxH): 4270 x 1500 x 2530 mm Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German * Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&f ...

pressure: 260 t chamfer lenght: 3000 mm distance between columns: mm upper beam stroke: 250 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 3,40 x 1,90 x 3,45 m • Controlled axes: Y, X • Control: Haco type PB 2350 • Pivoting control panel, left front • Free-moving dual footswitch • Tool package: Stamp straight, H 175mm, approx. R 1.5 4 V block die V 15.22, 35, 50 mm Die V 100, length = 4 x 835 mm Die V 80, length = 4 x 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haco PPEC 35 ton x 1600 mm CNC Capacity: 35 ton x 1600 mm Backgauge: CNC Control: 2D touch Passage between uprights: 1100 mm Max stroke: 100 mm Max distance between table -- ram: 295 mm Depth of throat: 195 mm Table width: 110 mm Locking speed: 80 mm/sec Working speed: 11 mm/sec Returning speed: 70 mm/sec Electric motor (power): 4 kW Length: 2600 mm Depth: 1500 mm Height: 2240 mm Weight: 2500 kg

Haco PPH 200 ton x 3600 mm Capacity: 200 ton x 3600 mm Passage between uprights: 3100 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 70 mm/sec Working speed: 8,8 mm/sec Returning speed: 74,6 mm/sec Electric motor (power): 25 HP Length: 4100 mm Depth: 1900 mm Height: 2700 mm Weight: 12 ton

Haco PPH 60 ton x 3100 mm Capacity: 60 ton x 3100 mm Backgauge: manual Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 280 mm Depth of throat: 200 mm Table width: 135 mm Locking speed: 70 mm/sec Working speed: 8,8 mm/sec Returning speed: 74,6 mm/sec Electric motor (power): 5,6 kW Length: 3280 mm Depth: 1200 mm Height: 2100 mm Weight: 4,5 ton

Haco PPB 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: no backgau Passage between uprights: 2550 mm Max stroke: 120 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 180 mm Locking speed: 60 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 7,5 kW Length: 3260 mm Depth: 1600 mm Height: 2520 mm Weight: 7 ton

Haco PPH 1604 Capacity: 160 ton x 4100 mm Backgauge: no backgauge Passage between uprights: 3600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 63 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2545 mm Weight: 10 ton

Completely restored and painted MODEL PPH 40/135 Useful length mm 4050 Between studs mm 3550 Power Tns 135 Cinse collar Mm 250 Motorized backgauge Manual fine adjustment Standard punch tooling Multi-mouth matrix Approximate dimensions: mm 4500 x 1700 x 2400

Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between stands 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg -with: - Two-hand control panel with foot switch

Specifications: Machine stands over the hallway, does not go into the floor - Printing capacity 400 t - Working width 3100 mm - Passage between stands 2600 mm - Table width 300 mm - Projection 400 mm - Installation height 500 mm - Ram stroke 550 mm - Table height 1000 mm - Drive 400 V / 50 kW - Space requirement approx. W 4100 x H 3800 x D 2200 mm - Weight machine approx. 24800 kg - Weight accessories approx. 1000 kg -with: - Swivel arm – control panel for press depth - Control ATS 460 renewed in 2007 - two-hand control panel, foot switch, - Sharpening tool 2500 mm - V – die 2700 mm - various short press brake tools

3 axes: Y1 / Y2 / X Capacity: 135 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 250 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

pressure: 60 t : 24 V Axis: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * including analogue depth display - manual backgauge, with analogue position display * adjustable from the front * on ball screws * 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt. ...

pressure: 40,0 t chamfer lenght: 1600 mm distance between columns: 1100 mm table width: 60,0 mm column arm: 200 mm table height: 800 mm dayligth: 300 mm stroke: 100 mm ajustment speed: 70,0 mm/s working feed: 8,8 mm/s return speed: 75,0 mm/s oil volume: 100 Liter engine output: 4,0 kW weight: 2500 kg range L-W-H: 1800 x 1210 x 2090 mm Furnishing: - electro-hydraulic press brake - easy to use - swiveling operation, front left - electro-mechanical adjustment of the immersion depth (Y axes) * including analogue depth display - electro-mechanical adjustment of the back gauge (X axis) * 2x manually adjustable stop fingers * Lateral + height adjustment possible (Z+R axis) - Tool system at the top - System A = AMADA including top wedge crowning - Tool system below - Sysetm A = AMADA - freely movable 2-hand/foot control - Rear safety device (protective door) * Machine link: https://mhp.logotech. ...

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

HACO TSX 3012 hydraulic guillotine shears were manufactured in Belgium in 2008. The machine’s structure made of welded sheet metal maintains high stability, even during the most intensive work. Guillotine is fitted with high-quality cutting knives, which achieve excellent precision when cutting workpieces with a maximum thickness of 12 mm and a length of 3050 mm. Two hydraulic cylinders with hardened and ground pistons drive the cutting bar guided by special roller bearings. The piston in the cylinder is connected to the cutting bar of the machine by hinged links. All functions, such as setting the cutting length or setting the back gauge stroke, are controlled by the easy-to-use HACO SC70 control system. The guillotine shears weight 8900 kg. Technical specifications of the HACO TSX 3012 guillotine shears - NC control: HACO SC70 - maximum cutting length: 3050 mm - maximum cutt ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Key data: 135 t, 3150 mm

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000  

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling  

Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm