used HOLZ HER 12

KW saw unit 4.6 Length 5300 mm Cutting height 2100 mm Cut depth 80 mm Overall machine height 2900 mm Strip stop Weight approx. 700 kg Saw blade ø 300 mm Folding bar

Cutting length: 5300 mm Cutting height: 2200 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 5300 mm Cutting height: 2200 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4300 mm Cutting height: 1925 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw, panel dividing saw, vertical panel saw machine -Horizontal cutting length: 5400 mm -Vertical cutting length: 2300 mm -Diameter saw blade: 220 mm -Motor power: 3.0 kW -Cutting depth: 60 mm -Machine length: 6200 mm -Transport height: 2550 mm -Required space: L6200/ W1100/H2870 mm -Weight: 750 kg

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

HOLZ-HER Edge Leveling Machine Triathlon 1487 V single-sided edge leveling machine in left-hand version with upper web pressure - Edge thickness: 0.4 - 15 mm - Edge height: 66 mm - Plate thickness: min. 8 mm/ max. 60 mm - Feed speed: 12/16 m/min. equipped with: Color screen SPK 18000 CO 1 spraying device for the inlet area 1856 (non-stick agent) 1 spraying device for the outlet area 1856 (Detergent) Joining milling unit Edge magazine automatically for rolls and strips Adhesive application station printed work Cross-cut unit 2 motorized Milling unit Milling unit corner machining 2 motorized Drawing blade unit Surface drawing blade Schwabbelaggregat Electrical connected value 52 A, 17 kW Air connection 3/8", min. 7 bar- Dimensions in mm: approx. 8000 x 1600 x 2000, Weight in kg: approx. 3000

SECOND-HAND EDGER HOLZ-HER MOD. TRIATHLON 1486 V - Pre-milling unit - End trimming unit - Profile cutter unit - radius 0-1-2-3 - Round unit - Glue scraper - Scraper unit -Brushes - Cleaning unit - Spraying device - Suitable for evo or Pur glue - CE rules (year 2002)

I am selling an edge banding machine Holz-Her Sprint 1310, built in 2004. Configuration: Edge banding Cartridge glue Cross-cut saws Swivelling radius milling machines Radius pulling blade Polishing brushes Very good condition, fully operational.

Manufacturer: Holz-Her Fräsständer, for left machine side: links, Number of motors: 2, kW-Leistung : 2,2, Drehzahlen U/min : 11600, Horizontal Rollentastung : yes, Vertical roller sensing: yes,

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm modern control with selector switch for setting the units Pre-milling unit for attachment in front of the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cutting unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic changeover of 0-10° incline of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - bevel milling - 15° Corner Copying Unit - 3 mm Edge Thickness Scraper unit for chamfers and radii with 2 scraper blade carriers Surface Scraper Unit - Finish Machine with all machining tools Machine is WORKING IN VERY GOOD CONDITION

Woodworking Center Holz-Her Easy Master 7015 CNC Equipment and technical data: Software: TwinCAM 32 Milling unit power 4.4 KW, clockwise rotation, 1000-18000 rpm, tool holder sleeve Dmax = 16mm Workpiece support with 4 brackets that can be slid in the X direction, mechanically fastened, each with 2 vacuum cups Travel paths X axis 2.685 mm Y axis 1.09 mm Z axis 140 mm Siemens digital servo drives 4-way side tool changer Boring head: 9 vertical boring spindles in a 32 mm grid. 1 double drilling spindle for horizontal drilling 1 grooving saw assembly, 1.5 KW outer diameter 120mm inner diameter 20mm Vacuum pump with a capacity of 40m³ / h, including vacuum suction Safety mats in the work area Year of construction 2001 Weight approx. 3500 kg. Equipment used only for a short time as a demonstration in school. Very little job translation. The device is in very good condit ...

Voltage 380V 24A Edge feeder 1901 Glue station, 1906 Printing 1913 1974 saw unit Milling unit with 2 mm 1975 rounding cutters Buffing unit 1944 Dust nozzle 100 mm Glue height 50 mm To glue er thickness up to 5 mm Extendable roller pad Length 3700 mm Width 1100 mm

Power supply 400V 7, 2kW Suction Ã? 1 x 70 + 1 x 100 mm Workpiece thickness min/max 6/45 mm Workpiece length of min 180 mm Workpiece width of min 60 mm Roles - and stripes Edge magazine rolls in 1901 to 3 mm Glue nozzle 1906 Printing unit 1914 End trimming unit 1976 edge thickness of 13 mm Milling unit 1943 flush 12 mm Milling unit 1942 R2 Milling units 1942/1943 as currency units RADIUS scraper 1927 Buffing unit eintauchen 1944 pneumatically controlled Edges have control over DAZ 11 Compressed air connection of min. 6 bar

1901 = Plater 1907 = momentary nozzle at the bridge 1915 = chamfer cut 1914 pressure - 4 mill = 1915 = chamfer cut 1920 = flush / chamfer 1920 = rounding 1935 = loop, elektropneum. with single - or off dive control, Schleifbandgeschw. 22 m/s 1944 eintauchen controlled buffing, aggregate = swivel 2 advance speeds 8 + 16 m / min. Suction connector 160 mm Nominal current 32 A - 16 kW Granupress (granules) Workpiece height min/max6 / 45 mm Workpiece length min. 140 mm Werkstückbreite60 mm Routes control programmable Edge height max. 66 mm Kantenstärke0, 3-30 mm Edge thickness roll max. 3 mm Lxwxh: 6600 x 1300 x 1720 mm Weight 1700 kg

Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...

Control Panel top Edge feeder 1902 Adhesive order station, 1906 Caps scissors 1902 Printing 1816 End trimming unit 1918 Milling unit 1942 M Rounding scraper 1929 Contour trimming unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air 6 bar Suction connection ø 120 mm Length 5300 mm

Weight approximately 1950 kg Control Panel 1888 Preliminary milling unit 1961 Edge feeder 1901 momentary nozzle Printing 1913 MOT End trimming unit 1918 1942 top milling unit Milling unit 1942 up/down rounding milling Scraper 1929 Contour trimming unit 1983 Surface scraper 1964 Buffing unit 1944 Length 5900 mm Connection value 21.4 A

Power supply 400V / 11kW Suction connection ø 1 x 100 mm Compressed air 6 bar Weight 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness of min. 6 mm, 45 mm Workpiece length of min. 180 mm Workpiece width of min. 60 mm Feed 13 m / min Edge thickness of 5 mm, roll 3 mm Edge magazine 1301 with DAZ 11 Glue station, 1906 Printing unit 1914 End trimming unit 1976 Milling unit flush 1942 Milling unit RADIUS R2 1943 Scraper 1927 Buffing unit 1944

Power supply 400V 4, 4kW Compressed air 6 bar Extraction 1 x 80 mm Lxwxh: 3970 x 1420 x 1200 mm, width with removed from roller: 1990 mm Weight 625 kg Workpiece thickness min/max: 6/45 mm Workpiece width of min. 60 mm Workpiece length of min. 180 mm Roll edge thickness 3 mm, max. 8 mm strips Edge feeder 1901 Glue nozzle 1906 End trimming unit 1976 RADIUS scraper 1929 Milling unit 1942 DAZM for better adhesive

Power connection 400 V / 0.8 / 1.0 A Speeds 1400/2800 rpm 2 rolls 2 speeds Right/Left Run Stand HxWxL 700 x 400 x 1100 mm Weight approx. 30 kg

Power connection 400V 1.3 kW Right/Left Run 2 speeds electric via switches 2 speeds via gearbox 2/4/6/5/10/12/15/30 rpm LxWxH: 1200 x 450 x 700 mm Weight approx. 42 kg with tripod

Length machine 4430 mm Glue thickness 0.3-13 mm Height 51 mm Glue min. 200 mm Feed speed 13 m/min Connection value 7kW Air connection 6 bar Suction diameter 100 mm Cutter change unit flush rounding 1942 - 1943 Magazine 1901 Glue station 1906 Printing unit 1914 Caps 1976 Drawing blade 1927 Schwabbeln 1944