used HELMERDING ER

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 124 mm strokes per minute: 60/90 ram adjustment: 85 mm table surface area: 920 x 600 mm ram surface: 540 x 290 mm daylight, max. stroke above - ram adjustment above: max. 440 mm hole in the table: 290 x 170 mm tool hole in ram: Dm. 50 mm total power requirement: 6,5 - 8,5 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 300 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x560 mm ram surface: 540x280 mm hole in the table: 320x190 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2000x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 250 mm stroke: 6/98 mm ram adjustment: 75 mm no. of strokes: 60/90 Hub/min table height adjustment: 150 mm table surface area: 695 x 500 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 0,9 x 1,6 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 128 mm ram - range of adjustment: 80 mm strokes per minute: 60 - 90 table surface area: 920 x 600 mm ram surface: 540 x 290 mm hole in the table: 315 x 180 mm daylight, max. stroke above - ram adjustment above: 520 mm tool hole in ram: Dm. 50 mm total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 1,8 x 1,7 x 2,2 m Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball spindle adjustment using a ratchet - automatic central lubrication VOGEL - Operating instructions / CE declaration available Machine is partially overhauled in our company as follows: - dismantled, clea ...

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

a used stamping machine Helmerding, type KDH/2100/2, BauJ. 2008 Pressure 315 to., partially overhauled, Siemens S7 controller, hydraulic. Overload protection, complete helmerding conveyor system, distance between the stands 2100 mm, installation height 500 mm, stroke 40-200mm, 20-100 strokes, table surface 2000 x 1200 mm

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

pressure: 25 t throat: 190 mm stroke: 12-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 60 mm table surface area: 560x350 mm ram surface: 310x150 mm hole in the table: 150x100 mm table height: 800 mm tool hole in ram: Ø 30 mm weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1500x1500x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 190 mm stroke: 12-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 60 mm table surface area: 560x350 mm ram surface: 310x150 mm hole in the table: 150x100 mm table height: 800 mm tool hole in ram: Ø 30 mm weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1500x1500x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 230 mm stroke: 20-120 mm no. of strokes: 130 Hub/min ram - range of adjustment: 70 mm ram surface: 330x170 mm table surface area: 600x450 mm hole in the table: 200x120 mm : 150 mm weight of the machine ca.: 3.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: machine number: VR-1130 control: SIEMENS Simatic Multi Panel strip width: 250 - 1600 mm strip thickness: 0.8 - 4.0 mm diameter of all straightening and feed rolls: 140 mm straightening speed, frequency controlled: 30 m/min.  , please also have a look at the video and the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 6,300 x 2,700 x 2,400 mm, weight approx.: 11,000 kg

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Manufacturer: Ergoline, model: ergo-metrics 900L. (B) 115-230V, 20 999W, 30-130W, 5 load levels 1-99 minutes, 8 x programmable, with LCD display, measuring blood pressure and pulse measurement year: November 1993. Elek. Voltage: 115-220V Elek. Performance: 20-999W. Condition: Good! question? write us. 2hand4sale.de

Carton erector, Lantech – second-hand - : Price from location: 22.500.- € (net), dismantled, packed and loaded! Manufacturer: Lantech Supplier: Bang & Co Type: Case Eroctor Model: C-2000-Hotmelt Machine number: SM20144342 Year of construction: 2014 400V, 3L+N+PE, 50Hz,4,52kW 6 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: 25 cartons per minute with speed option Adhesive Tape, Hot Adhesive, flash / snap bottom closure

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

Ladies and gentlemen, we can offer you on request various aircraft spare parts new and used. With a friendly greeting Trade & Translations

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm ***** Basic unit ***** X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg ***** pneumatic ***** Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 ***** electrics ***** Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard ***** General ***** Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 10 ...

We offer spare parts and accessories for hose pouring machines. Visit our homepage: www.protech-web.de