used HEILBRONN REP

a very good, C-frame eccentric pess Heilbronn, Model REP 315, year 2006, pressure 315 tons, table 1400 x 950 mm, ram 1000 x 700, adjustable stroke 25-200 mm, 25-60 s.p.m., ram adjustment 200mm shut height 300-287 mm

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

a very good mechanical double stand press Heilbronn, year of construction 1993, model REPZ 500 S, pressure capacity 500 to., table/plunger 2250 x 1400, plunger adjustment 200 mm, table height over corridor 770 mm, stroke 300 mm, installation height 650 mm. Automatic punching machine with transfer unit and blank loader

a very good mechanical double stand press Heilbronn, year of construction 1993, model REPZ 500 S, pressure capacity 500 to., table/plunger 2250 x 1400, plunger adjustment 200 mm, table height over corridor 770 mm, stroke 300 mm, installation height 650 mm. Automatic punching machine with transfer unit and blank loader

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

pressure: 100 t throat: 350 mm stroke: 8 - 100 mm no. of strokes: 60 Hub/min daylight (stroke down, ram adjustment above): 300 mm ram adjustment: manuell 80 mm table surface area: 850 x 700 mm hole in the table: Dm. 180 mm mm ram surface: 560 x 400 mm ram drills x depth: 40 x 95 mm table height over floor: 850 mm total power requirement: 7,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 1,4 x 2,2 x 2,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

Top width 2000 mm Turning diameter over bed 600 mm Spindle bore about Ã?80 Bed width 430 mm Tailstock MK5 Chuck diameter 315 mm Weight approx. 8to 92. P2b9fy8n Control Bosch CC220 (recently renewed)

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

DECOILER (with coil lifting unit) type HAEMH 5000/1600 capacity 5,00 to. mandrel length 1,600 mm expanding range 460 – 530 mm mandrel – Ø 508 mm mandrel – Ø with steel segments 610 mm height floor to middle of mandrel 1,220 mm coil outside – Ø 1,400 mm working direction (previously) left - right required space (L x W x H) approx. 8,000 x 2,500 x 2,200 mm weight approx. 8,10 to. accessories: ● paper coiling unit motor driven (ground erection) sleeve width max. 1,600 mm sleeve inside diameter 76 mm ● base frame with integrated gear rack (decoiler movement) ● coil lifting unit - over floor – integrated in decoiler base frame ● decoiler motor (auxiliary drive) power 1.1 kW expanding process hydraulically press arm hydraulically press roll driven (motor driven by chain) power 0.75 kW decoiler movement motor driven (by ge ...

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 65 , 350 , 100

Nominal force 65 t

turning diameter over bed: 3600 mm turning diameter over slide rest: . mm turning length: 10500 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 350 mm stroke: 8-80 mm dayligth: 300 mm no. of strokes: 125 Hub/min ram - range of adjustment: 80 mm ram surface: 400x300 mm table surface area: 850x700 mm hole in the table: 350x200 mm total power requirement: 7.5 kW weight of the machine ca.: 4.5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked !!

turning diameter over bed: 500 mm turning diameter over slide rest: 250 mm turning length: 1200 mm turning diameter in the gap: mm turning speeds: 7,1 - 1400 U/min centre height: 250 mm spindle bore: 49 mm total power requirement: 7,5 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,85 x 1,3 x 1,6 m Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force 50 ton Stroke 8 - 100 mm Max. stroke rate 140 strokes/min Drive power 3 kW Clamping surface 650 x 500 mm Machine weight approx. 2,750 kg

Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation

Distance between centers: 1200 mm Center height above bed: 200 mm No other accessories Weight: approx. 1300 kg

Weisser Heilbronn Ø 640 x 3300 mm Distance between centers: 3300 mm Swing over bed: 640 mm Swing over cross-slide: 400 mm Diametre of main spindle bore: 72 mm Number of speeds: 28 > 1400 rpm