used HEBROCK TOP

HEBROCK TOP 3004 F edge banding machine joint milling up to 2mm milling depth, from 40mm - 1mm milling depth Gluing up to 60mm Joining and corner copying up to 40mm Joint milling Glue basin, maintenance-free, coated HF cross-cut sawing station HF milling station radius / flush Signal lamp for workpiece sequence Extendable workpiece template

Description: Machine available from week 49 See PDF for details edge thickness: 3 mm, workpiece thickness: 60 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,620 mm, weight approx.: 1,160 kg

max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm Radius 3 mm tooling

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Motor 3 kW 380 V with plug 16 A Base mobile folding table extensions 800 mm self build Cut off the edges with tooth saw blade Feeder 3 rollers Crosscut and end caps station without bed.-instructions and without tools

Edge gluing machine Hebrock AKV 3003 DKF Glues, caps, flush milling with radius cutter L x W x H: 4300 x 800 x 17500 mm Weight approx. 650 kg Built in 2005 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge gluing machine Hebrock Euro 2000 Gluing, flush milling without cap L x W x H: 1.8 x 0.9 x 1.3 m Built in 2007 Weight approx. 300 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

with PLC control (incl. touch screen) Hot melt adhesive specification on the workpiece for edge material up to 3 mm Joining milling machine (incl. DIA tool) up to 2 mm milling depth maintenance-free glue basin with interchangeable basin pre-equipment incl. adhesive outlet device RF milling station with pneumatic milling adjustment incl. corner run-away milling machine Surface drawing blade (incl. pneum. Excavation device) Joining head Whispercut Combi milling head Radius milling machine R=2 mm Radius corner milling machine R=2 mm incl. optional accessories: Quick-change device corner milling machine Radius drawing blade (incl. pneum. Excavation) Multi-radius drawing blade (R1/R2) Nesting per station (milling/radius drawing blade) pneumatic 3-point adjustment

Edge gluing machine with hot melt adhesive specification to the workpiece for Edge material up to 3 mm, joining milling up to 2 mm milling depth, maintenance-free coated glue basin, HF cross-cut saw station (approx. 16000 rpm), HF milling station (approx. 16000 rpm), with removable plate cutter, corner round milling machine, Surface drawing blade, groove milling machine (front side), robust chain drive, ball-bearing double roller upper pressure, aggregate view window of Machine back and operator side, extendable workpiece support, Feed approx. 10 m/min

:1 mm Workingpiece thickness from to:16-40 mm Total length:1500 mm

:1-3 mm Workingpiece thickness from to:16-38 mm

I sell a molded part - edge banding machine IMA HKA. Suitable for curve elements. Good condition, possible to check ! RS radius milling machine for molded parts elements in stock also !

I sell an R2-Radius edge milling machine HEBROCK HFF08, Section saw included. Year of construction 2003. Condition like new.

Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 * 800 * 1.250 mm (incl. plate) Machine weight: 95 KG

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

Description: Technical data: Batten thickness: 0.4 - 0.8mm (no HPL) Roll diameter: ø750 mm Plate thickness: max. 10-50mm Workpiece length: min. 170 mm Power supply: 230V, 50Hz Ordering: Relay 1. hot air dryer 3 KW, heating time 1min. 2. cut band flush with workpiece 3. clear space above and below Throughput:4 m/min. Pressure:7 - 8 bar Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,200 mm, weight approx.: 250 kg

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg

Article is original packed

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

This Bench Top Press from Craver is in machine storage at Plastima Used Machinery. The machine is from 1994 and is in good condition – Brand: Carver – Model: 3393-682 – Year built: 1994

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...