used HACO TS

HACO TSX 3012 hydraulic guillotine shears were manufactured in Belgium in 2008. The machine’s structure made of welded sheet metal maintains high stability, even during the most intensive work. Guillotine is fitted with high-quality cutting knives, which achieve excellent precision when cutting workpieces with a maximum thickness of 12 mm and a length of 3050 mm. Two hydraulic cylinders with hardened and ground pistons drive the cutting bar guided by special roller bearings. The piston in the cylinder is connected to the cutting bar of the machine by hinged links. All functions, such as setting the cutting length or setting the back gauge stroke, are controlled by the easy-to-use HACO SC70 control system. The guillotine shears weight 8900 kg. Technical specifications of the HACO TSX 3012 guillotine shears - NC control: HACO SC70 - maximum cutting length: 3050 mm - maximum cutt ...

Hydraulic guillotine shear HACO TSX3006 The machine is located in Spain.

: 3050 mm : 06,0 mm : - : 0,5-3,0 ° : 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Key data: 135 t, 3150 mm

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000  

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling  

Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Hydraulic Press Brake HACO type ERMS 20330 Year of construction2002 Capacity: 330 T x 2000 mm Throat depth: 350 mm Command: HACO type ATS 550 - 2 axes Back Rear Gauge Weight: approx 18 T

BRAND: HACO YEAR: 2018 MODEL: HSLX 3006 APPLICATION TYPE: SHEARING LOCATION: SLOVENIA MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1750 MM MEASUREMENTS DEPTH: 3800 MM MEASUREMENTS HEIGHT: 1650 MM MACHINE WEIGHT: 5000 KG CONTROL UNIT BRAND: HACO MODEL: SC100 T Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORKING WIDTH: 3050 MM - WORKING THICKNESS: 6 MM - MAX. CUTTING ANGLE: 3 MM - ENGINE POWER: 7. 50 KW

HACO PPES 30135 5-AXIS CNC press brake was built in 1991 in Belgium. The machine operating with a press force of 135 tonnes performs precision bending of workpieces with a maximum width of 3000 mm. Machining is performed in five axes, which are controlled numerically (Y1, Y2, X, R axes) and by voltage potentiometer (Z axis). Among the extensive equipment on the press there is a CYBELEC DNC 60 CNC controller, DSP LASER light curtains to prevent entry of the operator into the working area and PROMECAM hydraulic top tool clamping. The press brake was continuously serviced and upgraded – during use, the control cabinet with four-axis controller was replaced and the machine’s upper pistons were reconditioned. Technical parameters of the HACO PPES 30135 CNC press brake - maximum press force: 135 t - CNC controller: CYBELEC DNC 60 - number of numerically controlled axes: 4 (Y1, Y2, ...

BRAND: HACO YEAR: 2004 MODEL: TS 3012 APPLICATION TYPE: SHEARING LOCATION: POLAND MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4200 MM MEASUREMENTS DEPTH: 2100 MM MEASUREMENTS HEIGHT: 2400 MM MACHINE WEIGHT: 8900 KG CONTROL UNIT BRAND: HACO MODEL: SP 8 MAIN DRIVE SPINDLE MOTOR POWER: 22.5 KW MEDIA MAIN ELECTRONIC CONNECTION: 380V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX CUTTING LENGTH: 3000 MM - BACK GAUGE STROKE: 1000 MM - MAX CUTTING THICKNESS: 12 MM - CUTTING ANGLE: 0. 5-3 DEG QUALITATIVE MACHINE BENEFITS: - MACHINE CONNECTED, READY FOR TESTS. - ALL PICTURES ATTACHED HERE. THE SELLER WILL SEND US MORE DETAILED PHOTOS SOON

Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id    5325 MAKE        HACO TYPE          TS 306 YOP            80 er SPECIFICATIONS Guillotine / Lazer / Cutting table        Guillotine Cutting lenght         3050 mm Maximum sheet thickness      6 mm Backgauge stroke X in mm        0 - 1000 mm DIMENSIONS Length       3600 mm Width         2100 mm Height        2000 mm

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

Capacity: 320 t Folding length: 4100 mm CNC Brand: _Unknown / Other CNC Model: Robosoft ATS 900 MACH-id     5560 MAKE         HACO belgium TYPE           ERM 40320 YOP             2005 SPECIFICATIONS Max. bending length         4100 mm Distance between column        3150 mm Max. pressing force           320 T Dis. Beam - Table         500 mm Beam stroke                  250 mm Troth beam                     330 mm Approch speed               80 mm/min. Working speed                8 m ...

Sheet thickness: 12,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id    5484 MAKE         HACO TYPE           HSL 3012 YOP             90 er SPECIFICATIONS Maximum sheet thickness         12 mm Max. cutting length                    3100 mm Strokes on full length                 17 mm Strokes in short 1000 length       21 Cutting angle      0,5 - 3 ° Length backgauge        0 - 1000 mm Number off down holders        18 Approach speed         50 mm/sec. Power          15 kW DIMENSIONS  Length  &n ...

Sheet thickness: 13,00 mm void: 0 Table length: 4100 mm Table width: 4100 mm Knife length: 4100 mm MACH-id    5322 MAKE         HACO Belgium TYPE           HSLX 4013 YOP            2000 SPECIFICATIONS Control        Robosoft SC7p Guillotine / Lazer / Cutting table        Guillotine Cutting lenght        4100 mm Maximum sheet thickness        13 mm Backgauge stroke X in mm      0 - 1000 mm DIMENSIONS Length     4300 mm Width       2500 mm Height      2200 mm

Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3050 mm MACH-id     5122 MAKE          HACO Belgium TYPE            HSLX YOP              2011 SPECIFICATIONS Control        Cybelec CybTouch 8 Guillotine / Lazer / Cutting table         Guillotine Cutting lenght         3050 mm Maximum sheet thickness       6 mm Backgauge stroke X in mm      750 mm DIMENSIONS Length        3400 mm Width         4000 mm Height        2100 mm

BRAND: HACO YEAR: 2017 MODEL: ERMS30250 APPLICATION TYPE: BENDING LOCATION: CZECH REPUBLIC MACHINE TYPE: BENDING MACHINES AVAILABILITY: 01 12 2023 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3320 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2750 MM MACHINE WEIGHT: 12900 KG CONTROL UNIT MODEL: EASY BEND 2D MAIN DRIVE PRESSING FORCE: 2500 KN BENDING LENGTH: 3100 MM NUMBER OF AXIS: 4 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORKING STROKE 200 MM - BACKGAUGE STROKE 800 MM - WORK SPEED 8 MM/S - MAIN MOTOR POWER 18. 7 KW - 4 CONTROLLED AXES Y1, Y2, X, R - MANUAL CROWNING (BOMBIERUNG) - INCLUDING TOOLING QUALITATIVE MACHINE BENEFITS: - VERY GOOD CONDITION, LOW HOURS

Capacity: 135 t Folding length: 3100 mm CNC Brand: ATL CNC Model: 2000 Make Haco ERM 135 T Type EUROMASTER - ERM Year 1992 ATL 2000 Capacity (metric tons) 135 Ton Folding length (mm) 3.100 mm Down stroke or Up stroke Synchro Tandem type Y¹+Y²+X+ V1 set universal tooling  

Haco - Com PPM 220 ton x 4100 mm CNC Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 80 mm Working speed: 9 mm/sec Returning speed: 80 mm/sec Electric motor (power): 25 HP Length: 5400 mm Depth: 2400 mm Height: 2800 mm Weight: 16 ton

Prasa krawędziowa CNC/NC Haco ERMS 16-40 40 tons ERMS 16-40 2006