GLIMEK Dough Divider SD-180 - exhibition machine, brand new condition, year of manufacture: 2020 - working range 50 - 1.000 g, 120 - 1.600 g or 180 - 2.300 g, capacity range 750 - 1.800 pieces per hour, frequency converter drive for infinitely adjustable machine speed, 100 liter hopper made from stainless steel, machine covers made from stainless steel, mechanical flour duster made from stainless steel power supply: 1.1 kW, electrical supply: 400V/50-60Hz/3~
GLIMEK Conical Rounder CR-400 GM - exhibition machine, brand-new condition, year of manufacture: 2022 - weight range 30 - 2.000 g, capacity range up to 3.600 pieces per hour, centrally adjustable track system, non-stick coating on cone and tracks, infeed at 6'00, outfeed at 12'00, track base plates made of food safe plastic, frequency converter drive for the cone speed, hot and cold air blowing unit, mechanical flour duster from stainless steel, 5 m connection cable and CEE-plug, power supply: 2.8 kW electrical connection: 400V/50-60 Hz/3~
GLIMEK-Dough Divider SD-300 XL - exhibition machine, brand-new condition, year of manufacture: 2022 - working range 150 - 1.150 grams as 2-pocket and 250 - 2.300 grams as 1-pocket, variable speed 1.500 - 3.000 pieces per hour as 2-pocket, stainless steel frame and machine covers, 225 liter stainless steel hopper, PLC with touch screen panel, NI-resist steel mechanism, frequency converter drive, scraper system with oiling device, mechanical flour duster made from stainless steel
GLIMEK Long Moulder MO-881 exhibition machine, brand new condition, year of manufacture: 2018 weight range 30 - 1.800 g capacity range up to 3.000 pieces per hour working width up to 650 mm foldable second pressure board for easy cleaning pressure board adjustable in height pressure board with adjustable side guides machine movable on castors curling net made from stainless steel infeed hopper with centering device adjustable roller spacing three pairs of rollers made of food-safe plastic
GLIMEK-Dough Divider SD-600/2-4 - Exhibition and demonstration machine, brand-new condition, year of construction: 2019, 835 operating hours - Working range 250 - 1,700 g in 2-chamber operation or 100 - 700 g in 4-chamber operation capacity range 1,000 - 3,000 pieces per hour in 2-chamber operation or 2,000 - 6,000 pieces per hour in 1-chamber operation weight range and capacity range infinitely adjustable Touch screen control with recipe management Stainless steel frames and covers 225 litre stainless steel hopper with interior coating Frequency converter drive for infinitely variable speed regulation adjustable pneumatics enables dough-gentle processing Automatic oil level control
Bread intermediate fermentation cabinet Glimek 8 row / bread plant -Fermentation cabinet stainless steel clad -8 row -completely set up immediately available in the warehouse
Exhibition machine, brand new condition weight range 30 - 1.800 g capacity range up to 3.000 pieces per hour working width up to 650 mm collection tray in stainless steel stainless steel for grains and seeds foldable pressure board for easy cleaning height adjustable pressure board pressure board with adjustable side guides infeed conveyor for direct feeding by belt- or conical rounder frequency inverter for stepless adjustment of the belt speed machine movable with lockable castors culing net in stainless steel, adjustable roller spacing two pairs of rollers made from food-approved plastic electrical flour duster mounted on the infeeed conveyor centering unit for dough pieces with two rollers and separate drive
power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.
* Weight range 30 - 1800 g; * Productivity up to 3.600 pieces per hour * Cold and hot air blower installation * Forming guides and taper with non-stick coating * Forming guides with centralized adjustment * Food grade plastic track base plates * Movable machine with fixed rollers * Power supply ca 2.35 kW; * Net weight 460 kg; * Parameters 1190х1350х1455
:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mm turning diameter over slide rest:1000|1200|1500|1600 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1100 mm workpiece weight:12 (15 opt.) t spindle bore:130 mm spindle taper:140 spindle speed (3 steps):2,5-250 U/min metrical thread cutting:1~120 (44 Arten) mm longitudinal feeds:0.1 ~ 12 (56 Arten) mm/U face feeds:0.05 ~ 6 (56 Arten) mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:760 mm movement of the upper support:300 mm tool size:45 x 45 mm tailstock quill diameter:260 mm stroke:300 mm tailstock-quill conus:80 metrisch spindle motor:30 (50 opt.) kW tool holder:4-fach steady diameter:500-800 mm CNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loading warranty:12 months on parts only BRANDNEW conventiona ...
Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mm turning diameter over slide rest:345|480|680|880 mm turning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mm travel of cross-slide cross:370|420|520|620 mm movement of the upper support:200 mm bed width:600 (Monoblock) mm spindle bore:105mm (130 oder 155 opt.) mm spindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/min metric threading:1~240 mm feeds - longitudinal:0.1~24,3 mm/min feeds - cross:0.05~12,5 mm/min rapid traverse longitudinal and cross:4000, 2000 mm/min turning tool - shaft cross cut:32 x 32 mm tailstock quill diameter:100 mm tailstock quill stroke:240 mm taper in tailstock:6 MK main drive motor:11 (15 kw opt.) kW max. workpiece weight between centers:3000 kg Weight approx.:4t bei ...
:SDM-1460 | SDM-1660 | SDM-1860 | SDM-2060 turning diameter over bed:1460 | 1660 | 1860 | 2060 mm turning diameter over slide rest:960 | 1160 | 1360 | 1560 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1180 mm workpiece weight:20 t spindle bore:105 mm spindle taper:140 spindle speed:3-200 1/min, 4 stufig metrical thread cutting:1~60 mm longitudinal feeds:0.1~6 mm/U face feeds:0.05~3 mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:750 | 850 | 950 | 1050 mm movement of the upper support:280 mm tool size:45 x 45 mm tailstock quill diameter:280 mm stroke:300 mm tailstock-quill conus:100; 1:7 metrisch spindle motor:55 kW tool holder:4-fach steady diameter:250-600 mm CNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loading warranty:12 months on parts only BRANDNEW conventional heavy duty center lathe