used GIARDINA GST

Manufacturer: Giardina, Type: GST 1400, Year: 2005, Work piece width min-max mm: 50-1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: no, Power per lamp watt UV: 80, od distance mm: 100, Conveyor lenght mm: 2000, Outer belt width mm: 2450, Feeding speed m/min: 8-20, Conveyor: Stange, Drive power kW: 1,2, Year :2005

Dryer UV size 70x100 Yer 2006 Working machinery

- Producer Giardina - Type GST 1400/2 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Installation length 3000 mm - Location - Voltage fluctuation max. +/- 5 %

Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005

COMPILATION: 1 drying chamber (400 x 550 cm) 1 spray chamber (500 x 550 cm)

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

- Producer Giardina - Type G 95 / 05 - Year of construction 1997 - Working width 1.300 mm - Working height 900 mm +-20 mm - Part height 3 - 90 mm - Operating side, right - Roller for lacquer ca. 55 Shore - Metering roller 165 mm - Reverse drive - Total connection power 3,4 kW - Weight 1600 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock D-32825 Blomberg - Commodity code 8479 8997 - Voltage fluctuation max. +/- 5 %

Manufacturer: Giardina 1450 mm 40 shore 10 Gummierung<CRLF>, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10,

Manufacturer: Giardina Lackersatzwalze 1450 mm shore 25 30Gummi, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 25, Approx. thickness of rubber coating in mm: 30,

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben<CRLF>1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging:  ...

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: 1,0, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, everse drive: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: yes, Strassenbetrieb: möglich, Carriage: yes, Year :2008

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: links, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: ca.1,2, Auftragswalzengeschwindigkeit m/min min-max: 720, Gummierte Auftragswalze(n): yes, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, kW - Leistung Dosierwalze: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: band, Pump system: membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: möglich, Einbaulänge Auftragsmaschine mm: ca.900, Carriage: yes, Year :2008

Manufacturer: Giardina, Working length mm: 4100, Working widht mm: 1400, Total hight mm: 950, Feeding speed max m/min: ca 25, Feeding speed min m/min: ca 10, Feeding speed continous adjustable: yes,

Manufacturer: Giardina, Working length mm: 4100, Working widht mm: 1400, Total hight mm: 950, Feeding speed max m/min: ca 25, Feeding speed min m/min: ca 10, Feeding speed continous adjustable: yes,

Manufacturer: Giardina, Working length mm: 3500, Working widht mm: 1400, UV-Band: ca 920, UV conveyor belt: 120, Bandkühlung: 60, Frequency converter: yes, Engine power kW: 3500 X 1700, Belt 13 length width mm: Spezialband mit Vibrationsmotor um Wasserbestand und Verlauf des Materials zu egalisieren,

Manufacturer: Giardina Ersatzwalze 1452 shore 60 Gummi 20 mm Neu, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1452, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Giardina, Working length mm: 5000, Working widht mm: 1400, Total hight mm: ca 920, Feeding speed max m/min: 20, Feeding speed min m/min: 8, Feeding speed continous adjustable: yes, Belt 1 length width mm: 5000 X 1700,

Manufacturer: Giardina, Type: Rollbahn, Year: ca.2005, Driven: yes, driven: yes, Length-width mm: ca.980, Total hight mm: 890 +/-, Adjustable: yes, Roller pitch mm: ca.220, Conveyor speed m/min: 10-25, Year :ca.2005

Manufacturer: Giardina 3500 mm 1350 mm, Working length mm: 3500, Working widht mm: 1400, UV-Band: ca 920, Bandkühlung: 6,7, Frequency converter: yes, Engine power kW: 3500 X 1700, Belt 13 length width mm: Vorschub bei 50 Hz 6,7 M/min Istzustand/ über Frequenzumrichter mögliche Geschwindigkeit ca.20-25 M/min,