used FESTO EMM

Data: as good as new Motor technology AS AC-Synchronous Flange size motors: 80mm Size: M Medium Winding: LS Low Voltage Measuring unit: S encoder absolute, multi turn without brake

Data: as good as new Motor technology AS AC-Synchronous Flange size motors: 80mm Size: M Medium Winding: LS Low Voltage Measuring unit: M encoder absolute, multi turn B Brake

Data: as good as new Motor technology AS AC-Synchronous Flange size motors: 80mm Size: S Short Winding: LS Low Voltage Measuring unit: S encoder absolute, single turn B Brake

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price !!! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purcha ...

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price!!! (Changes and errors to technical data and prices reser ...

Three-point gripper, HGDD-63-A-G1, 1163047, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

length 2 x, 3 x time milling, old but good condition B.?

Valve Islands Manufacturer: Festo Type: VIFB-06-D-1, TN 18 810 1 x INTERBUS-S modules indent.: 5 4 x LR CP A/B-D-1 11 x J-5/2-D-1 C. 22 x MNDH-3-1.4 External dimensions: width x length x height (approx. 73 x 23 x 8,5 cm) All information without guarantee

Crosscut saw motor 1,8 kW Milling motor above 1.8 kW Milling motor below 1.8 kW Sliding table with Superfix manual clamping devices, Saw blade 2 St. split washers

1 x saw pneumatically adjustable 2,5 PS 1 x pin cutter shaft 6 HP 1 x Nutfräserwelle 6 PS Pneum.. Clamping with foot valve Sliding table fence + extension

stable table press with pneumatic cylinder FESTO DN 200-50 to 10 bar loadable max. nominal force : according to FESTO catalogue approx. 18840 N at 6 BAR Steel tube frame press Table passage approx. 1.2m Installation height approx. 400 -550 mm (lift-adjustable steel frame) Pneu. Two-hand operation and maintenance unit Mass: approx. 1.35 x0.75 x 1.6 m

Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price !! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Data: Motor technology AS AC-Synchronous Input current: 5A Input voltage: 230V AC / 50-60Hz Single phase, with 3x slots

Magnet coil, electromagnet, pull magnet -Type: MSN1G-24V -Connection: 24 V DC 2.5 W. -Price: per piece -Number: 14x available -Minimum order: 3 pieces -Weight: 0.1 kg

3 pieces available / Price: 600.00 EUR per piece Data: as good as new Size 55 Stroke: 600 mm M Middle support

Data: as good as new Size 120 Stroke: 1000 mm TB timing belts KF ball circulation guide

4 pieces available / Price: 1,460.00 EUR per piece Data: as good as new Size 120 Stroke: 1800 mm TB timing belts KF ball circulation guide

Magnet coil, electromagnet, pull magnet -Type: MSFG-24/42-50/60-0D -Connection: 24 V DC 4.5 W. -Price: per piece -Number: 14x available -Minimum order: 3 pieces -Weight: 0.1 kg

Items of pneumatic parts Make : Vers. , partly new, 10 pcs cylinder grey Martonair, used but in good condition. 6 pcs. 100mm , RM8032B/M electr. Limit switch 2 pcs. 200mm, RM8032B/M electr. Limit switch 2 pcs. 250mm, detto 1 pc. pistonless cylinder 1 pc. Festo DNC-32-260-PPV-30K2-66K8 new 1 pc. Festo DSNU-25-280 PPV-A 1 pc. Festo DSNU-20 – 150 PPV-A 3 pcs KNOTH , 35/25 , 50/25 , 70/50 , ( φ. / Hub ) Control block, 5 valves, 5/2 wayv. Elekt. 24 V = Control block, 6 valves, 5/2 wayv. Elekt. 24 V = Control block, 4 valves, 5/2 wayv. Elekt. 24 V= 2 pcs. directional control valves, 3/2, Festo, H-3- 1/4, manually operated 1 pcs. directional control valve, 4/3, Festo, HS-4- 3/8, manually operated Control block with 3-way valves and maintenance unit

Manufacturer: Festo 4 Koilen with holder made of aluminium profiles and 4 rollers Hose condition: New for more data see also photos please.

plug -Type: 192 009 -Number: 40x available -Price: complete -Weight: 0.5 kg

Branch branch module -Type: FRM-D-MIDI 170685 -Series: T743 -Pmax: 16 bar -Weight: 0.7 kg

Pneumatic cylinder, compact cylinder -Stroke: 40 mm -Piston rod: 8 mm -Number: 2x available -Price: per piece -Weight: 0.2 kg

Three-point gripper, HGDD-63-A-G2, 1163048, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.