used FASTI 209

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this  ...

sheet width: 1620 mm plate thickness: 3,0 mm distance between columns: 1700 mm daylight opening: 350 mm adjustment: UW 80 mm pivoting angle: 180 Grad total power requirement: 2,2 / 1,5 kW weight: 1.740 kg range L-W-H: 2.713 x 1.200 x 1.500 mm Furnishing: - electric / motorized swivel bending machine - Drive of the upper and bending beam - FASTI PLC control model FM 5 * 5.7 LCD touch screen display * Numerical input via membrane keyboard * Memory size for 20 programs with 20 steps each - swiveling control panel - manual backgauge - manual lower beam adjustment - Double foot switch - Operation manual - 2x front fenders * Replacement bending rails (upper tool) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3240 mm Daylight opening: 350 mm bending angle max.: 0 - 135 ° adjustment of lower beam: 80 mm power capacity: 2,2 / 1,5 kW total power requirement: 3,7 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 4,3 x 1,1 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 2,0 mm distance between columns: 2100 mm daylight opening: 350 mm adjustment: 80 mm pivoting angle: 180 Grad total power requirement: 3,8 kW weight: ca. 2200 kg Furnishing: - Robust electric motorized folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - electrical adjustment of the traverse paths of the upper beam - manual lower beam adjustment - Free-moving dual footswitch - with new pointed rail - Operation manual * Machine video : https://www.youtube.com/watch?v=n48Mu4hQrDs https://www.youtube.com/watch?v=pVX99IFvx0g The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 2,00 mm distance between columns: 2100 mm daylight opening: 350 mm adjustment: 80 mm pivoting angle: 180 Grad total power requirement: 3,8 kW weight: ca. 2200 kg Furnishing: - Robust electric motorized folding machine - Bending angle adjustment via electric potentiometer * infinitely adjustable * with digital value display - manual % automatic mode selectable - electrical adjustment of the traverse paths of the upper beam - manual lower beam adjustment - Free-moving dual footswitch - with new pointed rail - Operation manual * Machine video : https://www.youtube.com/watch?v=n48Mu4hQrDs https://www.youtube.com/watch?v=pVX99IFvx0g The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending capacity at 45 kg/mm2: 2540 x 2 mm 6 angles pre-adjustable Automatic or manual operation Double foot switch 1 additional edge rail 1 additional bending rail wide

Max. bending length 2540 mm Max. plate thickness 2,0 mm Equipped with: Motorized back gauge 2500 mm Segments Service tools etc.

sheet width: 2040 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,80 t dimensions of the machine ca.: m Manual and automatic bending process possible Bending angle adjustable via potentiometer Stroke height of the upper beam and material thickness can be preselected via DIP switches Polished bending rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: approx. 1800 kg

Offer 23336 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kg / mm², strength 3 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic sequential control for a complete workflow - Coding switch - Upper beam stroke up + down adjustment - Maximum opening width / stroke of the upper beam 350 mm - Height adjustability - the bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 2.2 kW - with - E.- foot button - Flat rail + pointed rail - Space requirement approx. W 3200 x H 1600 x D 900 mm - Weight approx. 2800 kg

Press brake, bending bench, bending machine, folding machine, die bending machine -Handover: in current condition as seen -Note: the right side of the upper beam was repaired (welded) -Condition: fully functional -Manufacturer: Fasti, folding machine type 2095-25-2 -Max. Working width: 2540 mm -Max. Sheet thickness: 2 mm -Opening width: 290 mm -Connected load: 3.7 kW -Clamping: via threaded spindle -Bending angle: adjustable via potentiometer -Dimensions: 3615/1790/H1780 mm -Total weight: 2760 kg -Handover in current condition as seen

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC hydraulic - bending machines, second-hand CNC - hydraulic folding machine, used FAB. / make: FASTI Model: 215/20/6 Control / control: FASTIMATIC CNC 4000 Performance: / sheet thickn.: max. 7mm (3000 N / mm2) at nominal working width Performance: / sheet thickn.: max. 6mm (4000 N / mm2) at nominal working width Maximum sheet thickness /. Max sheet thickn. 9.5 mm width / operation length: 2040 mm Lift of the upper cheek / vertical travel upper beam: 500 mm Adjustment of the lower Beam / adjustment below beam: 80 mm Weight / weight: 6.8 to Engine output (connected load: 7,5 kW) Specification / specifications: Double footswitch / feet double switch incl. tool set / incl. set of bending tools CNC - controlled Backgauge / CNC back stop

Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

sheet width: 2.100 mm plate thickness: 3 mm distance between columns: 2.100 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fasti Work Three-roll sheet metal bending machine 9019 007 109-25-8 2540 X 8 N/mm²

Specifications: working width 1540 mm - material thickness at 40 kg / mm² strength 6 mm - Bending angle setting electronically preselectable 0 - 135 ° - largest opening width / stroke of the upper cheek 200 mm - Height adjustability - the bending cheek 100 mm - the lower cheek 100 mm - Upper cheek drive 400 V / 2 kW - Bending cheek drive 400 V / 7 kW - E.- Foot switch - Space requirement approx. W 2400 x H 1650 x D 1100 mm - Weight approx. 4000 kg

sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

sheet thickness: 1.25 mm steel Roller center distance: 63 mm