used ERMAK CNC

Ermak CNC HVR 3100 x 10 CNC Guillotine Shear Machine is in very good condition

Folding length : 3100 mm 120 Ton Machine is in good condition

Cutting length : 3000 mm Max. cutting thickness : 13 mm Machine is in good condition

Machine is in good condition but you need to order new Control Panel! Maximum cutting length : 3100 mm Maximum cutting thickness : 20 mm

Bending length : 3000 mm 200 Ton Control unit : Cybelec Machine is in good condition

3100 x 6 mm CNC Cybelec with pneum. Sheet metal holding approx. 8000 kg

Hydraulic guillotine shear Manufacturer: Ermaksan -wear resistant blades upper knife: two sides; lower knife: four sides - Control unit: CYBTOUCH 6 - 1.000mm rear guide with drive, precision 0.1mm - 1.000mm side ruler and front supports - metric scales - ball screws on the front supports to facilitate the positioning of the sheets - CE approved front, back and side protection plates -light curtains on the back (labor protection) Delivery time: about 4 weeks -Sheet guide system -Automatic hydraulic adjustment of the cutting distance - Silent high pressure pump - Holding springs -adjustable pedal - emergency stop button - shadow line - retractable finger guard - CE certified regulation and conformity Technical data: Cutting width: 2600 Cutting thickness: 6mm Strokes per minute: 24 Number of fasteners: 12 pieces Pressure: 10 to. Main drive: 11 kw backgauge ...

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. Technical specifications  ...

Capacity: 200 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 70 in 4 Axis MAKE   ERMAK TYPE    CNC HAP YEAR    2007 SPECIFICATIONS Controll   Delem DA 70 in 4 Axis Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical    Hydraulic Bending length   3100 mm Distance between column  2550 mm Press force  200 Ton Throat        400 mm Stroke   200 mm Die height    435 mm Backgauge stroke X in mm   750 mm Number off controlled axis  4 Power   15 kW DIMENSIONS Length   4550 mm Width    2250 mm Height   2850 mm Ermak cnc pressbrake

sheet width:3100 mm plate thickness:6 mm distance between columns:3100 mm no. of strokes:16 - 24 Hub/min cutting angle:0,5 - 1,5 ° down holder:14 Stk. throat:350 mm table height:900 mm oil volume:150 l total power requirement:11 kW weight of the machine ca.:7060 kg dimensions of the machine ca.:4100 x 2200 x 2190 mm 1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment: - CNC controlled hydraulic blade gap adjustment system - CNC controlled cutting angle adjustment system - portable foot pedal - CNC controlled motorized backgauge system - front support arms with t-slot, ruler and flip stop - squaring arm - scales with metric and inches - cutting line illumination and shadow line - emergency stops - swing up backgauge - central lubrication system - front finger protection - rear sliding plates - front sliding plates with ball bearing on the table - 350 mm throat dept ...

Key data: 200 Delem, 4100 DA 70

Capacity: 200 t Folding length: 4100 mm CNC Brand: Delem CNC Model: DA 70 Max. bending length:        4.100mm Distance between column:    3.600mm Max. pressing force:        200T Dis. Beam – Table:          435mm Beam stroke:                200mm Table Width:                225mm Troth beam:                 4.090mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               90mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  4 Power:                  & ...

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTe ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety devi ...

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ba ...

sheet width: 4100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 18 Stück no. of strokes: 15 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC Cybtouch engine output: 11,0 kW back stop - adjustable: 1000 mm range L-W-H: 5000 x 2410 x 1650 mm weight: 8.100 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 14 Stück no. of strokes: 20 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC CybTouch weight: 5500 kg range L-W-H: 4.000 x 2.100 x 1.640 mm total power requirement: 11,0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, incl ...

sheet width: 2600 mm plate thickness: 8,0 mm thickness at Niro-steel: 5,0 mm down holder: 12 Stück no. of strokes: 18 Hub/min oil volume: 200 ltr. cutting angle: 1,5 ° engine output: 15,0 kW weight of the machine ca.: 6.300 kg range L-W-H: 3525 x 2350 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.t ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 28 Stück no. of strokes: 18 Hub/min oil volume: 260 ltr. cutting angle: 0,5 - 2 ° control: CYBELEC Cybtouch engine output: 22,0 kW back stop - adjustable: 1000 mm range L-W-H: 6100 x 2580 x 2460 mm weight: 15.100 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, f ...

Ermak CNCHAP 3100x200 Press Brake Folding length : 3100 mm 200 Ton Machine is in good working condition