used ELIN MKH

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

Krauss Maffei No. 6445689 45 kW

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

Alternator generator ELIN MCT-440 L08 T6B-9 280kw electric motor 400V 757 R/min air cooled Manufacturer: ELIN Model: MCT-440 L08 T6B-9 Number: 715983 Year of built: unknown Performance: 280kw Supply: 400 V Revolutions: 757/min Weight: 2,530 kg for further details please refer to the pictures.

Slow runner with ELIN marine diesel generator 250 kVA.Sehr little running hours!

3 phase squirrel cage motor, 90 kW 1007 r/min, 400 V D, 50 Hz, 158,000A, cos.phi 0.810, TCLB, 40 degrees C, 1000 m, price ex works

Electric motor, three-phase motor -Power: 3 kW -Speed: 930 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 440/340/H320 mm -Weight: 52 kg

Used stuffing machine Edhard MKHX Edhard machines are used for dispensing all kinds of masses for doughnuts, croissants, cookies, moulds, etc. The mass can be changed in an instant by changing the hopper. The masses inserted into the hopper are dosed by means of an electric motor controlled by an electronic panel on which the portion size is set. Thanks to the electronic control, the machine feeds the portions with a very high degree of accuracy, thanks to which we obtain a high quality and repeatability of the final product. Technical data: machine dimensions (W x L x H): 391 x 229 x 241 mm installed power: 1/17 Hp voltage: 220/240 V/50 Hz weight: 5.5 kg double hopper 5.5l 2 needles for stuffing doughnuts.

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

Brueninghaus hydraulic pump A4VSO 125 EO1/10, max. 280 bar, capacity: approx. 125 ccm, ELIN E-motor 55 kW

Power generator Hitzinger, 68 kVA, otherwise gemaess Bilder More: diesel generator, emergency generator, ship diesel Simmering Graz Paucker SGP / ELIN S12 /Elin 250 kVA See pictures below

Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used, tested ! Dimensions: 1000 x 600 x 840 mm

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

Cutting capacity of carbon or medium alloy steel with cold R of 80 dN/mm2 @T = 1150 C: square 40 - 100 mm; round 40 - 100 mm @T = 1050 C: square 40 - 90 mm; round 40 - 100 mm T min/max cut with standard blades 1.000 - 1.250 C Cutting length: 50 - 400 mm Load bank maximum capacity: 10 tons Loadable bar length: 4.5 - 10 m Loadable bars section (round and square) 40 - 100 mm Other relevant plant engineering:  ELIND induction furnace ~ 500 Kw Abundant availability of accompanying documentation