used DELLA TOFFOLA NF

Country: Ukraine Year: 2012 Category: Process Technology Manufacturer: Della Toffola Model: NF 20 Availability: Immediately Overview The Kieselguhr filter was manufactured by Della Toffola in 2012. It was used in an Ukrainian brewery. Due to decreasing production volume, this filter is not used any more as they have other filters with smaller capacity. The filter has only been used for approx. 1000 hours and is therefore still in a very good overall condition. Tech Specs: Capacity: 600 HL/h Filter tank volume: 1,030 l Dosing tank volume: 240 l Centrifugal pump power: 11 kW Dimensions: Length: 2,650 mm Width: 1,500 mm Height: 2,850 mm Weight: 1,400 kg

Used Fossil Flour Filter Della Toffola NF 10 2012 Model NF 10 Year of construction 2012 Recently used Isobaric Voltage 400V 3 stages Frequency 50 Hz Full load current 15 A [...for more information send your inquiry to the seller.] ***refno: FLT08***

Used Fossil Flour Filter Della Toffola NF 15 2012 Model NF 15 Year of construction 2012 Recently used Isobaric [...for more information send your inquiry to the seller.] ***refno: FLT07***

Used Flour Filter Della Toffola 2012 Model NF 20 Year of construction 2012 Recently used Regular maintenance It has an output liter counter [...for more information send your inquiry to the seller.] ***refno: FLT06***

Used Della Toffola rotary filter in stainless steel, surface 20mq, model FVI20, new 2007. Complete of vacuum pump group, feeding pump, extraction pump. With motovariator for drum rotation. Automatic advancement system of the panel cutting knife. With stainless steel mixer HL 52 about. Electric control panel. Complete with use and maintenance handbook, wiring diagram and CE declaration. Filter dimensions: Length 5000mm X Width 2450mm X Height 2300mm about. Mixer dimensions: Ø2300 mm x Height 2700mm about. Pump group with electrical panel dimensions: 2200mm X 1800mm X Height 2500mm about. Total weight kg: 3420 about. 

Overview The Kieselguhr filter was manufactured by Della Toffola in 2012. It was used in an ukrainian brewery. Due to decreasing production volume, this filter is not used any more as they have other filters with smaller capacity. The filter has only been used for approx. 1000 hours and is therefore still in a very good overall condition. Tech Specs: Capacity: 600 HL/h Filter tank volume: 1,030 l Dosing tank volume: 240 l Centrifugal pump power: 11 kW Dimensions: Length: 2,650 mm Width: 1,500 mm Height: 2,850 mm Weight: 1,400 kg

Manufacturer: Della Toffola   Filtration area: 4.5 m2 Drum dimensions: ? 100 x 150 cm Stainless steel frame on wheels Vacuum pump: Travaini TRMA 40-150/F Drum speed control: mechanical Electrical cabinet / control panel Mixing tank

offered without plates. Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm More then 300 machines new and second hand on our seema .de

filtration surface (sqm): 20 discharge of vessel: automatic discharge operating pressure (bar): 12 electrical power supply kW: 27 weight [kg.]: 1.5 volume of vessel (ltr): 1040 More then 300 machines new and second hand on our seema .de

* General * SKU302M513 * LocationBarneveld * MakeDella Toffola * Year of constructionUnknown * Main Features * MaterialStainless steel * Motor0.55 KW * Surface25 m2 * Specified Features - Rotating vacuum filter * Rotating vacuum filtercheck * Filter surface25 M2 * Drum sizesdia. 1600x5000mm * Motor+/- 0,55 KW * With knife dischargecheck * Mechanical operatedcheck * Motorcheck * With liquid pumpcheck * MaterialStainless steel * Information * With switchgearcheck * Floorspace6,5x2,8 M * Total height2,2 MDella ToffolaRotating vacuum filtersBrand > Della ToffolaFilters > Rotating vacuum filters What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Indramat module NFD 02.2-480-016 Bosch Rexroth

Indramat modul NFD 02.1-480-008 Bosch Rexroth

Connection value approx. 18 kW Working width 140 mm Feed below consists of: Conveyor belt 8800 x 60 mm at the bottom Conveyor belt 8800 x 40 mm for stem Feed above consists of: Conveyor belt 7140 x 40 mm top Aggregates: Item. 1 - Scribble 2.2 kW 3000 rpm. Item. 2 - Milling unit 3 kW 6000 rpm. Item. 3 - Milling unit 5.5 kW 6000 rpm. Item. 5 - Belt grinding unit 2.2 kW 120 x 2060 Item. 8 - Belt grinding unit 2.2 kW 120 x 2060 / frame grinding belt Item. 4, 6, 7, 9 - Profile and edge breakunits Suction nozzle 5x100 mm, 1x120 mm

Fllter approx. 2x3 meter with grating covering approx. 300x 300 cm and exhaust air camea Motor 3 KW ex-protected Available from around August 2021 Price net loaded on truck cheaper for self-disassembly

Carton setters Carton dimensions (mm) min. / max. Length (L) 220 / 600 Width (B) 100 / 500 Height (H) 100 / 500 Machine overhauled at the factory, with warranty on replaced parts.

Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Program memory for 99 filling programs Electric power: 4 KW Machine dimensions in cm: Width: 60 Length: 110 Height: 160

specifications: - Volume flow: 8,500 m³/h - Pressing PA max: 700 Pa - Diameter suction nozzle: 400 mm - Filter area: approx. 3.9 m² - Working surface (WxH): 2.0 x 1.95 m - Electrical connection: 380 V, 50 Hz, 2.2 kW - Speed: 1,440 rpm - Transport dimensions (HxWxD): 2.55 x 2.10 x 1.0 m (with pallet and mounted nozzle) - Transport dimensions (HxWxD) with dismantled nozzle: 2.20 x 2.10 x 1.0 m - Weight: approx. 300 kg The extraction wall was completely refurbished in our house and checked for its correct function. It was completely cleaned and provided with new filter mats. Furthermore, the baffle plates on the left and right were renewed. Peel varnish has not been applied, but can be requested on request. The delivery takes place incl. 1 x mechanical control valve (throttle valve) and 1 x associated clamp. When installing the system, the use of a deflector hood is reco ...

* General * SKUR0893 * LocationBarneveld * MakeLe Carbone-Lorraine AG (FRA) * TypePolybloc NF610G * No.17324 * Year of construction1989 * Pressure * Working pressure shell6 Bar * Working pressure tubes6 Bar * Main Features * Shell (Material)Mild steel * Tube (Material)Graphilor * Surface24.5 m2 * Specified Features - Shell and tube heat exchanger * MaterialGraphite Graphilor XBS * Heat exchangercheck * Verticalcheck * Heating surface24.5 m2 * Max. temperature165 Degr.C. * Shell diameter660mm * Shell length1900mm * Max. temperature165 degr. C * Shell connections2x DN150 * Cover connections2x DN200 * Capacity134.1 Ltr * Information * Total height2.4 M * Weight1500 KG * Floorspace1,0x0.9 MLe Carbone-LorraineShell and tube heat exchangersBrand > Le Carbone-LorraineHeat exchangers > Shell and tube heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

* General * SKUR0890 * LocationBarneveld * MakeLe Carbone AG (F) * TypePolybloc NF610G * No.130261 * Year of construction1990 * Pressure * Working pressure shell6 Bar * Working pressure tubes6 Bar * Main Features * Shell (Material)Mild steel * Tube (Material)Graphilor * Surface16.3 m2 * Specified Features - Shell and tube heat exchanger * MaterialGraphite Graphilor XBS * Heat exchangercheck * Verticalcheck * Heating surface16.3 m2 * Max. temperature165 degr. C * Shell capacity80 ltr. * Shell diameter660mm * Shell length1380mm * Max. temperature165 degr. C * Shell connectionsDN150 (2x) * Cover connectionsDN200 (2x) * Capacity94,2 ltr. * Information * Total height1,8 M * Weight1300 Kg * Floorspace0,9x0,9 MLe Carbone-LorraineShell and tube heat exchangersBrand > Le Carbone-LorraineHeat exchangers > Shell and tube heat exchangers What you can expect from Foeth: -- Machine is in working condi ...

* General * SKUR0891 * LocationBarneveld * MakeLe Carbone-Lorraine AG (FRA) * TypePolyblock NF610G * No.17474 * Year of construction1996 * Pressure * Working pressure shell6 Bar * Working pressure tubes6 Bar * Main Features * Shell (Material)Mild steel * Tube (Material)Graphilor * Surface16.3 m2 * Specified Features - Shell and tube heat exchanger * MaterialGraphite Graphilor XBS * Heat exchangercheck * Verticalcheck * Heating surface16.3 m2 * Tube capacity80 Ltr * Max. temperature165 degr.C. * Shell capacity90 Ltr * Shell diameter662mm * Shell length1370mm * Max. temperature165 degr.C. * Shell connections2x DN150 * Cover connections2x DN200 * Capacity93.8 ltr. * Information * Total height1,8 M * Weight1500 KG * Floorspace0,9x0,9 MLe Carbone-LorraineShell and tube heat exchangersBrand > Le Carbone-LorraineHeat exchangers > Shell and tube heat exchangers What you can expect from Foeth: -- ...

Nukon NFPRO CROOS 315 GX 2 KW Fiber Laser Cutting Machine 3000 mm x 1500 mm Machine is in excellent condition

* General * SKUR0894 * LocationBarneveld * MakeLe Carbone AG * TypePolybloc NF 610 G * No.17496 * Year of construction1997 * Pressure * Working pressure shell6 Bar * Working pressure tubes6 Bar * Main Features * Shell (Material)Mild steel * Tube (Material)Graphilor * Surface16 m2 * Specified Features - Shell and tube heat exchanger * MaterialGraphite Graphilor XBS * Heat exchangercheck * Verticalcheck * Heating surface16,3 m2 * Max. temperature165 degr.C. * Shell capacity80 Ltr * Shell diameter660mm * Shell length1370mm * Shell connections2x DN150 * Cover connections2x DN200 * Capacity93.8 Ltr * Information * Total height1,7 M * Weight1250 Kg * Floorspace0,9x0,9 MLe Carbone-LorraineShell and tube heat exchangersBrand > Le Carbone-LorraineHeat exchangers > Shell and tube heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

Nordfab NFRP-Filter 2000 5+1 hjLR. See Appendix for details. Dismantling and loading possible.

X-travel: 700mm, y-travel: 150mm, z-travel: 150mm, spindle diameter: 55mm, rotational speed: 40-8000/min, length: 2100mm, width: 2200mm, height: 2400mm, weight: 2.5t.

Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002