Category: 301 injection moulding machines / Plastic injection machines
Latest update: 08.05.2017 add to watchlist
item-No.: 146314479
New in: 2006

used

Seller: KD FEDDERSEN NORDEN AB
Location: 51158 KINNA Land-se

add to watchlist

2 x Demag Systec 420 / 820 - 2300 , year of construction / year 2006 , 31,000 h operating hours /running hours. Machines with few operating hours and very good condition / Machines with low runninghours and in good condition. - Screw diameter / Screwdiameter x 80 mm , shot volume / shot volume: 1.583 cm3 Extra Equipment / Extar Equipment : - Enlarged ejector plate lt Euromap / Enlarged ejectionplate according to Euromap. - 2 x air valves on movable clamping plate / 2 x pneumatic valves on movable platen. - 2 x air valves on fixed clamping plate / 2 xPneumatikvalves on fixed platen. - 2 x circuits for hydraulic core pull / 2 x circuits for hydraulic corepull. - 2 x connections for core pull to movable clamping plate / 2 x Connections for corepull on fixed plate.

Category: 1108 spare parts
Latest update: 04.12.2023 add to watchlist
approved
dealer
item-No.: 162811522

used

Location: Land-de
Price: 1.250 € add to watchlist

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Category: 1405 cranes
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 14904099

used

check Seller: Fechner GmbH
Location: 77948 Friesenheim Land-de

add to watchlist

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Category: 1108 spare parts
Latest update: 04.12.2023 add to watchlist
approved
dealer
item-No.: 162821988

used

Location: Land-de
Price: 290 € add to watchlist

Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg

Category: 1108 spare parts
Latest update: 04.12.2023 add to watchlist
approved
dealer
item-No.: 162822302

used

Location: Land-de
Price: 250 € add to watchlist

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 25 kg

Category: 1300 other machines and plants
Latest update: 14.09.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 2079889
New in: 1983

used

check Seller: MET-TECH GMBH
Location: Land-de

add to watchlist

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
item-No.: 28411236

used

Location: Land-de

add to watchlist

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Category: 1405 cranes
Latest update: 19.03.2021 add to watchlist
approved
dealer
item-No.: 28411346

used

Location: Land-de

add to watchlist

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Category: 1005 cranes / Mobile cranes
Latest update: 05.01.2021 add to watchlist
approved
dealer
item-No.: 12544161
New in: 1961

used

check Seller: Reinhard
Location: Land-de

add to watchlist

V 70 9 tons good condition since it is always in a dry shed moving contact see: rerec@web.de or mobile: 0049 160 96232593

Category: 1102 engines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413843

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

V 70 9 tons good condition since it is always in a dry shed moving contact see: rerec@web.de or mobile: 0049 160 96232593

Category: 1402 other machines for mechanical handling
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 124136727

used

check Seller: AUER
Location: Land-at

add to watchlist

V 70 9 tons good condition since it is always in a dry shed moving contact see: rerec@web.de or mobile: 0049 160 96232593

Category: 1005 cranes
Latest update: 02.11.2023 add to watchlist
approved
dealer
item-No.: 138933368
New in: 1979

used

check Seller: Project Organisation Alexander Torlach GmbH
Location: 83395 Freilassing, Breslauer Strasse 41a Land-de
Price: VB 55 € add to watchlist

10 pcs. crane runway length approx. 9.5m long HEA 200/190 (s=6 mm) Crane rails 40 x 40 mm Accessories Available on request at an additional cost: - Circuit rail VAHLE Assembly On request, installation/assembly/recommissioning, also constructive changes (wingspan, hoisting unit, etc.), can of course be carried out by us in accordance with relevant regulations or with acceptance(s) throughout Europe. Visit A visit is possible at any time and at short notice, whereby the crane can also be tested under electricity if necessary. to ask? Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info.torlach EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with track connection and container loading ! - O ...

Category: 301 injection moulding machines
Latest update: 12.10.2011 add to watchlist
item-No.: 555021
New in: 1999

used

Seller: Tecplast e. K. Machinery
Location: Land-de

add to watchlist

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Category: 1300 other machines and plants
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 144820066

used

check Seller: CzeMar-Serwis
Location: 46113 Wilkow, Koscielna 10 Land-pl

add to watchlist

Used Machine

Category: 1405 cranes
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 146720294

used

check Seller: AUER
Location: 4407 Steyr-Gleink Land-at

add to watchlist

2 pieces of crane bottles

Category: 301 injection moulding machines
Latest update: 12.10.2011 add to watchlist
item-No.: 555025
New in: 1998

used

Seller: Tecplast e. K. Machinery
Location: Land-de

add to watchlist

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Category: 107 sheet metal working
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 151860382
New in: 1993

used

check Seller: MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

add to watchlist

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Category: 301 injection moulding machines
Latest update: 30.11.2012 add to watchlist
item-No.: 2215538
New in: 1998

used

Seller: Tecplast e. K. Machinery
Location: Land-de

add to watchlist

Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500

Category: 1102 engines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153153103

used

check Seller: IMA GmbH
Location: Land-de

add to watchlist

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160

Category: 301 injection moulding machines
Latest update: 25.07.2013 add to watchlist
item-No.: 4095377
New in: 2000

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Molding machine of Mag Type: Ergotech 100-430, El Exis control: NC 4 year of construction: 2000 Clamping unit Clamping force t 100 Gap mm: 445 Holm dimension mm: min/max height of 420 x 420 mm: 460 / 560 Plate size: 690 x 660 injection unit Screw diameter mm: Gr 40 injection weight: 210 Injection volume cm m³: 231 Spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 5 x 1.6 x 2 machine weight kg: 6900 Miscellaneous 1 Core pull of armored snail

Category: 1102 engines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153153104

used

check Seller: IMA GmbH
Location: Land-de

add to watchlist

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159

Category: 301 injection moulding machines
Latest update: 13.01.2015 add to watchlist
item-No.: 5097589
New in: 1997

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Molding machine of Mag Type: Ergotech 100-310 compact control: NC 4 year of construction: 1997 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 590 x 590 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2640 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP 12,Pneumatikventil

Category: 1102 engines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 153153105

used

check Seller: IMA GmbH
Location: Land-de

add to watchlist

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

Category: 301 injection moulding machines
Latest update: 08.11.2013 add to watchlist
ankerimg
item-No.: 5097599
New in: 1998

used

Seller: Tecplast e. K. Machinery
Location: Mülheim an der Ruhr Land-de

add to watchlist

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Category: 1402 other machines for mechanical handling
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794016

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online