used DECKEL FP1

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Shock head for cover FP1 and FP2 General overhaul new store and painted. Shock length 80 mm

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch

Travel XYZ: 300-150-340mm Spindle holder: Iso 40 S20x2 Spindle speeds: 40-2000 Table size: 260x600mm Floating angle table Digital Heidenhein on 3 axes Some tool holders Engine brake Voltage 3×380 Volt Power 1.1 – 1.3 kW With CE

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm

Key data: 250 mm, 150 mm, 340 mm

- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg

Max. rotational speed: 2000/min, with instruction manual.

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,700 mm

weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,700 mm

- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories

We no longer present this essential machine for all prototypists! In perfect condition, advance in height and width, No noticeable play Functional lubrication 2D visualization at 5microns X axis and Y axis 2-axis swivel table Adjustable sensitive head.

Mechanical dividing head for E.g. FP1 and FP3 all parts complete!refurbished! and repainted Dividing head with the following accessories & #9726;.Faceplate & #9726;.Vise handle & #9726;.Grease gun with a suitable attachment optional accessories & #9726; three-jaw Chuck with key & #9726;.Four-jaw Chuck with key

An unused Spiral fraes with all the zubehoer packed in a wooden box. Suitable probably for lid FP1 bsi lid FP3. Complete access system such as wheel box and alternating wheel, both for the raeder box, as well as for the sub-apparatus are included in the scope of delivery. The device can be used to fraesen spirals or as a sub-apparatus. The facility has probably never been used before and is therefore in a new state. Special price

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

; very good

Full cab cover FP2NC and FP2A Gene his all overhauled newly painted new Macrolonscheiben complete all parts available incl. hose and grid

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz

Why do you need an oil drip tray? Avoid large and expensive damage to your feed motor and the destruction of the drive amplifier. Here a brief explanation: Bed rail oil, which then drips down accumulates at 1. 2 Lands the oil accumulates in the cooling fins of the engine and continues on the way down. At 3, the oil eventually accumulates around then, fatally, after the feed motor to penetrate, which is destroyed as a result. High repair costs and a failure of the machine are the result. But it doesn't have to be. Simply mount the oil drip tray (at no. 2) on the motor (for the spindle drive). The oil drips now at 4 in the tray. Running at 5, the lowest point of the shell in there attached expiration. The oil makes its way through the hose 6 and is headed directly into the oil collecting tray of the machine 7. How to save costly repairs and down time of the machine.

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Reconditioned new safety switches painted with adjustable guard from 1900 up to 6000 RPM over pulley adjustable