We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Rotational speed: 90-1450/min.
used
Column drilling machine CORDIA type HS 30 VG Masch. No. 303.081.118 Year of manufacture approx. 1980 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 300 mm Pinol stroke 160 mm Table size 500 x 450 mm Column diameter 125 mm Spindle speed 38-1450 rpm. 12 stages Feed 0.1 - 0.2 - 0.25 mm/rev Motor power 1.5 / 1.7 / 2.3 kW Mains connection 380 volts, 50 Hz - pole-switchable main motor with 3 speeds - 4 gear stages • Tapping device • Table height adjustment via hand crank • Clamping surface at the machine base Space required: L x W x H: 700 x 550 x 2100 mm , weight: 390 kg , good condition; used
used
4 Head series drilling machine make CORDIA type S 18 IIFabr. -No: 630029/30/31/32Year of construction 1974Spindle mount: MK 2Drilling capacity: 18 mm6 speeds: 220 / 29ß / 440/720 / 950/1450 rpmDischarge: 300 mmgr. drilling depth: 120 mmColumn diameter: 110 mmDrive power: 1 hp (750 W)With- height adjustable table- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts
used
Drill, drill press, pillar drill, pillar drill -Manufacturer: Cordia, column drilling machine type S 26 -Motor: 1000W -Speeds: 95 - 1450 rpm, 6 levels -Table size: 320 x 270 mm, travel 500 mm -Spindle mount: MK3 -Spindle stroke: 100 mm -Projection: 280 mm -Columns Ø: 120 mm -Accessories: including lighting and additional. attached vice, see photos -Dimensions: 700/760/H1950 mm -Weight: 325 kg
used
Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm -Weight: 246 kg
used
Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg
used
Drill press, drill press, stand drill, pillar drill -with: clamping table and fixed machine vice -Table size: 275 x 325 mm -spindle taper: MK3 -Projection: 300 mm -Speeds: 90-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 125 mm -Translation via: gears -Number: 1x drilling machines available -Price: per piece -Dimensions: 770/660/H2060 mm -Weight: 284 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 805/550/H1070 mm -Weight: 236 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. Grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg
used
Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg
used
bore capacity in steel (diameter): 30 mm throat: 300 mm bore stroke: 120 mm table surface area: 420 x 370 mm spindle taper: MK 3 spindle turning speed range: 45 - 1450 U/min threading: bis / up to M 20 total power requirement: 2,2 kW weight of the machine ca.: 400 kg dimensions of machine L x W x H: 0,75 x 0,60 x 2,07 m - with thread cutting attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 30 mm throat: 300 mm bore stroke: 120 mm table surface area: 420 x 370 mm spindle taper: MK 3 spindle turning speed range: 45 - 1450 U/min threading: bis / up to M 20 total power requirement: 2,2 kW weight of the machine ca.: 400 kg dimensions of machine L x W x H: 0,75 x 0,60 x 2,07 m - with thread cutting attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 30 mm throat: 300 mm bore stroke: 120 mm table surface area: 420 x 370 mm spindle taper: MK 3 spindle turning speed range: 45 - 1450 U/min threading: bis / up to M 20 total power requirement: 2,2 kW weight of the machine ca.: 400 kg dimensions of machine L x W x H: 0,75 x 0,60 x 2,07 m - with thread cutting attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 30 mm throat: 300 mm bore stroke: 120 mm table surface area: 420 x 370 mm spindle taper: MK 3 spindle turning speed range: 45 - 1450 U/min threading: bis / up to M 20 total power requirement: 2,2 kW weight of the machine ca.: 400 kg dimensions of machine L x W x H: 0,75 x 0,60 x 2,07 m - with thread cutting attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used
used
Boom drilling machine KNUTH type KAB16 Masch. No. 44715 Year of construction 1987 Drilling capacity in steel 16 mm Drilling capacity max. 23 mm Spindle holder MK 2 Pinol stroke 80 mm Projection 550 mm Spindle speed 290 - 2330 rpm 12 steps Clamping surface 650 x 310 mm Distance between drilling spindle Clamping surface max. 890 mm Column diameter 102 mm Motor power 0.55 kW Mains connection 400 volts, 50 Hz Spindle speed via 12 V-belt steps - Drill head height adjustment via hand crank - Drill head swivels +/- 90- Drill head rotatable on the column and on the boom arm Space requirement L x W x H 1030 x 400 x 1000 mm Weight 140 kg very good condition; used
used
Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg
used
Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg
used
Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg
new
Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover