Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg
This machine is designed for removing heads from the next fish species: cod, pangasius, catfish, and tilapia. Fish size range: 30 - 70 cm. Capacity: up to 40 fish per minute.
Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.
Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184
Baader 184 Filleting machine for whitefish Filleting machine for whitefish Condition: Overhauled This machine is designed for filleting gutted and headed cod, saithe, haddock from 30 to 70 cm in total length (=0,3 - 2,5 kg, h&g) or depending upon the type of fish, also less than 70 cm. Time-tested Baader filleting system with high yield and operational reliability. The Baader 184 is equipped with an integrated skinning unit. Capacity: 24-40 fish/min Power consumption: 10 kW Water consumption: 25 l/min Dimensions: 6,15 x 1,70 x 1,50 m Weight (net/gross): 2550/2850 kg
Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg
Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...
Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg
Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg
Baader Filleting machine for whitefish Condition: overhauled Working range: whitefish from 35 to 70 см (=0,4-2,5 kg) Capacity: 27 fish/min Power consumption: 2,2 kW Water consumption: 20-25 l/min Dimensions: 3,80 x 0,95 x 1,60 m Weight (net/gross): 930/1564 kg
Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.
Baader 185 Filleting machine for whitefish Baader 185 provides filleting and skinning of a whitefish: big and medium cod, haddock, saith, merluza or the same fish. This machine is similar to the Baader 184. Its guidance assemblies and tools are, however, larger dimensioned. The working range of this machine is abt. 50 to 100 cm (=1 - 8,5 kg) for cod , abt. 50 to 90 cm (=1 - 6 kg) for saithe and abt. 50 to 80 cm (=1 -4,5 kg) for haddock, cm meaning the total length of the fish and gutted fish head on. Also can process de-headed fish: cod 40-80 cm (0.8-6.5 kg), saith 40-75 cm (0.8-5.0 kg) and haddok 40-65 cm (0.8-3.5 kg). Also with an integrated skinning unit the Baader 185 is highly efficient with optimal product quality and high yield. Completed with skinner Baader 51. Capacity: 24-32 fish/min Staff: 1 person Power consumption: 10 kW Water consumption: 28 l/min ...
One of the latest innovations by Baader for the fish industry. This machine is designed for filleting defrosted whitefish (with an average capacity of up to 40 filets per minute). Characterized by improved quality of smooth cutting even on soft fish (doesn't leave bloodstains or gaps on flesh). Easy to maintain at the production line, and easy to operate. Power: 4kW Voltage: 3x 400 V/ 50Hz Water consumption: 10L per/min Water pressure: 2,5 bar
Baader 52 DS is in excellent overhauled condition, this deep-skinning machine is specifically designed for efficiently removing the skin, along with the fatty layer between the skin and muscular tissue, using an oscillating blade. The thickness of the cut can be adjusted to meet specific requirements. It is suitable for processing various fish species such as salmon, saithe, merluza, Alaska pollack, and more. With a capacity of skinning 30-150 fillets per minute, Baader 52 DS offers reliable performance. It can be seamlessly integrated with all Baader whitefish and redfish filleting machines, enhancing overall processing efficiency. The power consumption of the machine is 2.0 kW, ensuring energy-efficient operation. It requires an electricity supply of 380 V at 50 Hz. The dimensions of the machine are 2150 x 850 x 1120 mm (length x width x height), providing a compact footprint ...
Baader IS 693 descaling machine, produced in 2004 and recently overhauled, is designed for high-speed descaling operations. It features six descaling spindles, three positioned above and three below the fish. Each spindle has a unique shape, enabling effective descaling of rounded fish such as Salmon weighing between 1 and 7 kg and similar species. The machine’s speed can be adjusted smoothly using a single button, offering flexibility during operation. It is suitable for onshore or offshore installation, depending on the requirements. Technical Specifications: Power Consumption: 4 kW Water Consumption: 20 liters per minute at 2 bar pressure, 30 liters per minute at 5 bar pressure Net Weight: 365 kg
Condition: Excellent The machine is designed for decapitation in continuous mode of cod fish, and can also beused for beheading perch. Size range: fish with a total length of 30-70 cm Performance: Up to 40 fish per minute. Power consumption: 1.87 kW Water consumption: 5 litres per minute. Belt width: 150 mm Divider height: 80 mm Height: 1450 mm Dimensions (DxXV): approximately 2160 x 885 x 1860 mm
Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side. Capacity: 50-160 fillet/min (depends on the fillet size and operator's skill) Power consumprion: 1,5 kW Water consumption: 15 L/min Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134
HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm
EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.
FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35
TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.
FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...