used ALUP SCK

Сompressor technical data: Power, cubic meters 10,2 Max. pressure, atm 10 Power, kW 75 Overall dimensions., Mm 1610x850x1355 Weight, kg 1050

75.0 kW, max. 10 bar, 10.40 m3/min.

75,0 kW, max. 10,0 bar, 10,40 m3/min.

90.0 kW, max. 10.0 bar, 14.03 m3/min.

90.0 kW, max. 9.0 bar, 14.39 m3/min. In very good condition.

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

Volume flow 6.9 m3/min Engine power 45 kW Compression pressure 10 bar

132,0 kW, max. 8,50 bar, 23,81 m3/min.

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

2 blower units Brand: ALUP Type: 190-1 Serial No.: c2lo401 & c2lo404 With housing 1 blower unit incl. :E-motor 160 kW

Piston compressor with reservoir Make ALUP Type AGK-N-551-270 Year of construction: 2004 Maximum pressure 10 bar Motor power 3 kW Engine speed 1400 rpm. Suction capacity 545 l/min. Flow rate 0.446 m³/min With compressed air tank 270 litres

piston compressor ALUP Flow rate 665 L/min CW 5,5 Pressure 10 bar Container capacity 350 litres

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP Einzelkompressoren HL 3050-Z488 Engine: 2 x 15 kW used, tested !; Dimensions: 3500 x 1200 x 1900 mm

PROD. ALUP TYPE ALLEGRO110 S/N API178778 YEAR 2020 POWER (kW) 110 kw PUMP. (m3/min) 3.6-19.06 (7.0 bar) 3.72-18.3 (8.0 bar) 3.90-17.16 (9.5 bar) PRESSURE (bar) 10 HR (DOC/GENERAL) 22871 INVERTER YES

Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003

Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 750/600/H950 mm -Weight: 80 kg

Description: Serial number: ITJ506362, The appliance has been serviced regularly, No scratches or dents. Last maintenance: 21.04.23., Operating hours: 2,244 hours Location: A-6820 Frastanz Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,600 mm, weight approx.: 470 kg

Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton

KBA Rapida 75a-5+L 5 col. + coater Maximum sheet size: 605 x 750 mm Year of man: 2009 (installed 2010) Impr.119 mil. CIP4 connected Densitronic ErgoTronic console B+R Bernecker + Rainer system control Techkon Spectro Drive Col. bar scanner ITC ink temperature control Double diameter cylinders Ecomatic Ultra-sonic double sheet control SAPC Semi-automatic plate change system VARIDAMP alcohol dampening Technotrans alpha.C Auto ink roller wash Auto blanket wash Auto impression cylinder wash Powder Weko Antystatic Simco Anilox Coating system Haris&Bruno Grafix IR dryer Steel plates in feeder & delivery Extended high pile delivery Compressor AGRE ( ALUP )

Description Automatic Sacks opener Production up to 600 sck/hour or 15 tons/hour Emptying rate up more than 99,99%