used APV GAULIN MC

Brand: APV Gaulin Type: MC 120-3TPS capacity: 20.000 l/h pressure: 205 bar Stages: 2 Dimensions: 170cm x 130cm x 175cm (LxBxH) Country of Origin: Germany YOM: 1993

Used homogenising Brand: APV Gaulin Type: MC45-5TPS capacity: 11,600 l / h Dimensions: 215 cm x x 130 x 165 cm (Lxwxh) Country of origin: Germany YOM: Max working pressure: 345 bar Piston diameter: 54 mm Valve: Poppet valves including control panel

Brand: APV Gaulin Type: MC 45-5TPSX capacity: 7.500 l / h current pressure: 345 bar Stages: 1 stage Dimensions: 215 x 152cm x 160cm (Lxwxh) YOM: 1982 Engine: PLS 280M; 90KW; 975 r/min; 380 V; 176 amp; 50 Hz

Manufacturer: APV Gaulin Type: MC7 - 2.9TPS YOM: 1999 converted to a high-pressure pump Output: 3000 l/h Pressure: 200 bar

Brand: APV Gaulin Type: MC 18-3TPS capacity: 7.500 l / h YOM: 1993 Max working pressure: 200 bar Motor: 55 kW Dimensions: 165 cm x 130 cm x 130 cm (Lxwxh) Electric: 380 V / 3 phase / 50 Hz Stages: 1 stage

We are offering a used milk homogenising, APV Gaulin MC of 7 it is in good condition and what running in a dairy up until lately. The homogeniser can be inspected near Berlin.

Manufacturer: APV Gaulin Type: MC30 Capacity: 12.000 l/h Pressure: 210 bar Condition : Fully refurbished in 2018 in very good condition includes control panel with soft starter

Stock# U2406 Used stainless steel contact parts (AISI 1.4405S) piston homogenizer by APV model Gaulin 5-4.3B. Machine has working output up to 500 l/h, with working pressure up to 300 bar. Machine has three cylinders belt driven by el motor 5.5 kW, 960 rpm, 380-400 V, 50 hz. Cylinders are water cooled, cooling water consumption up to 80 l/h. Mounted on four stainless steel legs. Shipping dimensions: L 99 cm x W 81,5 cm x H 99,6 cm. Last time used in food industry. Includes technical documentation.

This APV Gaulin MC120 homogeniser is a 5-cylinder machine which is designed for 25.000 liter per hour with a maximum pressure of 210 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on both stages. Piston diameter: 70 mm. Motor: 160 kW - 380 V - 281 Amp - 50 Hz - 1483 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available. Note: the head is cracked, needs to be repaired / renewed., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressur ...

This APV Gaulin MC45 homogeniser is a 3-cylinder machine which is designed for 20.000 liter per hour with a maximum pressure of 172 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on the inlet and manometer on the stages. Piston diameter: 76 mm. Motor: 90 kW - 380 V - 172 Amp - 50 Hz - 1485 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly i ...

This APV Gaulin MC18 homogeniser is a 3-cylinder machine which is designed for 10.000 liter per hour with a maximum pressure of 175 bar. The homogensier is equipped with 2-stages with poppet valve cylinder. Manometer on the stages. Piston diameter: 54 mm. Motor: 55 kW - 400 V - 96 Amp - 50 Hz - 1.480 rpm. Overpressure valve. Oil pumping system inside the machine. Stainless steel cladded., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly in the milk. The fat droplets are crushed by forcing the milk through fine nozzles under high pressure. This process prevents a layer of cream from forming on the milk., Excluding:, - Feetplates., - Name tag / typeshield on the homogeniser, so model and capacity based on motor power, piston diameter and pressure gauge., Type of Machine: Homogeni ...

Used 2-stage APV GAULIN G-37 homogeniser with 5000 L/H capacity and 200 Bar pressure. Year of manufacturing: 2005 Used in dairy plant on homogenising milk. Very good condition. Running condition. Tested on water.

APV Gaulin Homogenizer LAB 200/350/200/3 350 ltr./h, max. pressure: 350 bar

Power: 1000 l / h, maximum pressure: 550 bar, frame of the machine cast Ferro cladding made of stainless steel, plant 2003 completely overhauled, then no longer in use with two-stage homogenizing valve for manual operation, PLUG, 1st stage 2.Stufe in-PILOTED, with stainless steel Cabinet, completely wired for 30 kW, IP55, Star Delta starting, for wall mounting

Brand: APV Type: 15M capacity: 50 l / h Stages: 2 stages Max pressure: 8000 PSI (550 bar) Power: 2.2 kW (3HP)

Type: MC 18 - 3TPS Capacity: 5.000 l / h Max working pressure: 200 bar Motor: 55 kW Electric: 380 V / 3 phase / 50 Hz

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,

Gaulin MC15-5TPS homogeniser, 3850 l/u, 350 bar. 2 stage, manual operated homogenising valves, Fully overhauled, as new condition.

Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.

Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.

Gaulin 2 stage MicroGap homogenising valve. very good condition.

* General * SKU143P637 * LocationBarneveld * MakeGaulin * Type30-30CD * No.48810664 * Year of constructionunknown * Pressure * Working pressure1000 Bar * Main Features * Capacity113 Ltr./Hr. * Motor5.5 KW * Pressure1000 Bar * Specified Features - Piston homogeniser * Piston homogeniser(1x) * Capacity113 l/h * Number of pistons:3 * Motor5,5 KW, 380 Volt (50 Hz) * MaterialStainless steel * Information * Floorspace0,9x0,7 M * Total height1,5 M * Weight430 KG * Extra Specificationsincluding Alfa-Laval P20-HB plate heat exchanger 4 bar * Technical specs * Extra information15.000 PSIG (approx. 1000 Bar)GaulinPiston homogenisersBrand > GaulinMills > Piston homogenisers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

This APV Gaulin MC45 homogeniser is a 3-cylinder machine which is designed for 11.600 liter per hour with a maximum pressure of 320 bar. The homogensier is equipped with 2-stages with poppet valve cylinder. Manometer on the stages. Piston diameter: 54 mm. Motor: 100 kW - 380 V - 180 Amp - 50 Hz - 1475 rpm. Oil pumping system inside the machine. Stainless steel cladded., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly in the milk. The fat droplets are crushed by forcing the milk through fine nozzles under high pressure. This process prevents a layer of cream from forming on the milk., Excluding:, - Feetplates, Type of machine: Homogeniser, Capacity: 11.600 liter per hour, Stages: 2 stages, Max. Pressure: 320 bar, Valve cylinder: Poppet valves, Piston diameter: 54 mm, Motor: 100 ...

This APV Schröder Gaulin MC45 homogeniser is a 3-cylinder machine which is designed for 12.000 liter per hour with a maximum pressure of 280 bar. The homogensier is equipped with 2-stages with poppet valve cylinder. Electric pressure transmitter (IFM) on the stages. Overpressure valve on the block. Piston diameter: 60 mm. Motor: 110 kW - 380 V - 201 Amp - 50 Hz - 1482 rpm. Forced cooling on the motor for running at low capacity. Oil pumping system inside the machine. Stainless steel cladded., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly in the milk. The fat droplets are crushed by forcing the milk through fine nozzles under high pressure. This process prevents a layer of cream from forming on the milk., Excluding:, - Feetplates, Type of Machine: Homogeniser, Capacity: 12.0 ...

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h