used AMK AN

* General * SKU293T678 * LocationBarneveld * Makeunknown: missing type plate * Main Features * MaterialStainless steel * Volume315 Ltr. * Motor11 KW * Specified Features - Z-blade mixer * Z-blade mixercheck * Capacity315 Ltr. * Trough sizes860x840x740 mm * With covercheck * With jacketcheck * Single gearedcheck * Motor11 kW 380 Volt * Mechanical tiltingcheck * Motor750 W 346 V/2 A 220/380 Volt * Screw dischargecheck * Motor11 kW 380 Volt * MaterialStainless steel * Information * Mounted on framecheck * With switch(as is) * Floorspace2,5x1,6 m * Total height2 m * Weight3000 kgAMK AachenZ-blade mixersBrand > AMK AachenKneaders > Z-blade mixers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

Data processing!

Volume: 600 ltr. Material: Stainless steel

Volume: 400 ltr. Material: Stainless steel; --> Mixer equipped with a heating jacket.

Control comes from plant dismantling was tested and maintained until the last Plant is sold in complete or in individual parts

Material : areas in contact with the product in stainless steel Volume : 80 ltr. Drive : 10 KW Screw drive : 6,8 KW Operating temperature: 250°C Pressure inside : - 1 bar.

Luminous flux motor, motor, gear motor, electric motor, three-phase gear motor -Motor speed: 2950 rpm -Speed gearbox: 124 rpm -Power: 0.37 kW -Construction: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 630/220/H180 mm -Weight: 30 kg

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT Smaller and larger quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expe ...

Formwork accessories, uses:: anchor nuts DW15, largely EUR5,90 / piece anchor nuts DW15, small EUR2,90 / piece other dimensions (DW20, DW26,5) on inquiry

Motor Loher ANWA-250ME-04F No. 3225457 IN the B34 50 Hz 74HP kW 74/100 HP 380/400 V 440 / 460 100/97 A 86/114 0.87/0.88 0.88 cosP 1478/1482 / min 1780/1773 IP54, 495kg Used from Husky injection moulding machine GL225RS 60/50

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

2nd hand Van Wyk liquid and powder dispensing equipment with dust collector 128pcs tanks with Multi axis Posistioning Unit incl parallel sequence controller WPM 311 Gebrauchte Abfüllung von flüssigen und pulverförmigen Materialien mit Staubabsaugung. 128 Vorratsbehälter mit einer voll automatischen Posistionieranlage ( Multi axis Posistioning Unit incl parallel sequence controller WPM 311 )

Pick and Placement Machine (assembly of printed circuit boards with corresponding small components) including 8 flex feeders MYDATA Automation AB Sweden Dimensions: length 2440 mm height (Exclusive monitors) 1410 mm width 1090 mm Weight:approx. 600 kg Purpose: Assembly of printed circuit boards with various small components Year built/age: 1997 Condition: Good and functional Special features (deviation from the standard): The Flexfeeders are included Documentation (technical as well as technical): All documents are available

Used Gea aseptic form, fill and seal machine. Year 2000. Machine for filling and packing cream or condensed milk. Filling capacity 5-15 cm3. Filling temperature 20-25 ° C capacity 36,000 cups / h (maximum capacity at 30 cycles / min) number of cups per measure 20 32 mm format 10-cup block production speed max. 30 cycles / min

Pick and place Servo feeder Herzog+Heymann/Sigma; good condition; maintained and tested by Sigma Customer Service; Format max.200x150mm, min.50x50mm; Material thickness 0.1-6mm; High-speed version up to 18,000/h Pick and place servo feeder Herzog+Heymann/Sigma; good condition; checked by the support of Sigma; size max.200x150mm, min.50x50mm; thikness 0.1-6mm; high speed version up to 18.000/h.

Liebel Flarsheim ANGIOMAT 6000 Digital Injector System used and functional. You will receive a VAT invoice.

37 Tsudakoma Zax looms for sale in running condition 12 Tsudakoma Zax Looms 280cm - 110" Year 2002 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 13 Tsudakoma Zax Looms 330cm - 130" Year 1998 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 12 Tsudakoma Zax Looms 340cm - 1430 Year 2001 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop  ...

max. pole diameter 80 mm Weight approx. 520 kg Dimensions LxWxH: 1520 x 610 x 1350 mm

INJECTION PUMP AND VALVE SETS, 167052, 167046, 167044 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

1) 90050981 Terminal ST 200 KYR (RS-485) with cyrillic keyboard (black), black case, illuminated display, Memory for 1000 texts, activated RS-485, interface (D-Sub-15 socket), 485 interface can be used as RS-232 or RS-422 can be operated (combi) including: - 050.885.040 Power supply - 93051772 Connection cable RS-422 interface (2m), D-Sub-15 plug to D-Sub-9 socket – 2 pcs - 93051722 Connection cable RS-232 interface (2m), D-Sub-15 plug to D-Sub-9 socket – 2 pcs 2) 050.112.120 Block regulatory REA-JET 1/16 (95-240V - 50/60Hz) One Line - 16 nozzles – 2 pcs 3) 050,080,040 cable 16 K6

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

1. UHT: - GEA Finnah - YOM: 1991 - Capacity: 1200 l/h 2. Steep tank: - Rieger Behälter GmbH - YOM: 2008 - Cooling mantle - Volume: 6,250 l - Max. Pressure: 3.5/-1.0 bar 3. Homogenizer - GEA Nirosoavi NS3037 H - YOM: 2001 - Capacity: 2,000 l/h - 2 stages, max. 250 bar

with 6 heads; the monoblock consists of: - capsule dispenser: - capsule pre-and cripmer More then 300 machines new and second hand on our seema .de

Killing and evisceration Killer , Meyn from 2000 Bleeding channel Scalding 2006 from Stork Plucking A-16 from Stork Plucking finisher from Stork Transfer System Meyn 2010 Vent cutter machine from Meyn 2010, 20 units Eviscerator machine from Stork 2004, 24 units Neck breaker machine from Meyn 2010 Skin neck cutter from Meyn 2010 Lung remover machine from Meyn 2010 Inside / outside washing machine from Meyn ,2010 Intenstine line from Stork 2004 Lever collector and washer from Stork 2004 Gizzard machine from Stork 2004 Control table from Storlk 2004 Gizzard washer from Stork 2004 Overhead conveyor for arrival , killing and evisceration als included, control panels included

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Main shaft cone: Morse 6 Spindle travel - W axis 680 mm Year of manufacture: 1960 Tool with accessories: 45° milling cutter, small turning head, cartridge holder, 8 different knife holders, table can be rotated. With additional water cooling. Drilling from the spindle is perfect, feeds work, stable machine!