| Integrated motor spindle
speedMASTER® |
Drive power (100% DC) 30 kW |
|
Drive power (40% DC) 46 kW |
|
Torque (100% DC) 130 Nm |
|
Torque (40% DC) 200 Nm |
|
Speed range - 15000 rpm |
|
Spindle taper HSK-A 63 |
| Cabine |
Full protection cabin |
| Direct measuring system |
Direct path measuring system |
| NC swivel rotary table |
NC swivel rotary table with pallet carrier max.
table load: 400 kg / 882 lbs rotation B axis: 360° swivel range A
axis: 25° / -200° range X / Y / Z - axis 630 x 800 x 750 mm/24.8 x
31.5 x 29.5 in axis kinematics A / B (basic machine without NC
rotary |
| Clamping hydraulics 2/4 channels f.
working table/setup station |
Clamping hydraulics 2/4 channels for working table
/ set-up station for connection of hydraulic clamping devices incl.
pallet preparation basic machine |
| Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
| Tool magazine, wheel, 123 pockets
HSK-A63 |
Tool magazine wheel magazine (2 wheels) with 123
tool pockets HSK-A63 |
| Operation panel for loading station tool
magazine |
Control panel for loading station tool magazine
with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise
LTSB - 64 bit |
| Infrared measuring probe Heidenhain |
Infrared measuring probe Type Heidenhain TS 460
Tool taper HSK-A 63 |
| Tool measuring in machining area Blum
Laser NT-Hybrid |
Tool measuring in machining area Type Blum Laser
NT-Hybrid tool length and tool diameter measuring |
| Tool breakage control mechanical |
Tool breakage control mechanical version |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| SGS Spindle Growth Sensor |
SGS Spindle Growth Sensor Compensation of the
axial displacement of the motor spindle by an integrated
spindle-growth sensor. (Not in conjuction with motor spindle 18,000
min-1) |
| Production package 40 bar |
Production package: chip conveyor with coolant
unit 980 l paper band filter Discharge height: 950 mm Width: 380 mm
Internal coolant supply 40 bar / 23 l/min through spindle centre (AD)
roof chip rinsing 180 l/min External coolant supply 4 bar / 40
l/min |
| Coolant cooling |
Coolant cooling for internal coolant D4452871
supply 980 l / 259 gallon Cooling power max.: 3,800 W / 5.1 hp |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| TCC Tool Control Center basic
HSK-A63 |
TCC Tool Control Center basic HSK-A63 - Detection
of soiling at the tool interface - Spindle protection by monitoring
the max. forces - Determination of the tool pull-in force |
| TCC Tool Control Center advanced |
TCC Tool Control Center advanced - Extension of
the functional scope of the option TCC basic - Tool- and workpiece
protection - Visualization of the cutting symmetry - Machine
Protection Control MPC |
| Interface for Oil and emulsion mist
separator |
Interface mechanical and elektrical for oil- and
emulsion mist separator |
| Spray pistol with pump |
Spray pistol with pump 2 bar/40 l/min 29 psi/10.4
gallon/min (theoretical pump performance) |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| DMG MORI NETSERVICE |
DMG MORI NETSERVICE Qualified support by
Internet-based remote diagnostics |
| IoT connector |
DMG MORI IoTconnector The IoTconnector allows the
use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on
ADAMOS) |
| SERVICE AGENT (CELOS) |
SERVICE AGENT (CELOS) Overview of all maintenance
work on the machine |
| MESSENGER (CELOS) |
MESENGER (CELOS) Clear live status of the
networked machines |