We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Tech. Data VS 4 maximum strip width 250 mm, maximum advance length 400 mm Max band thickness 2.5 mm maximum band cross-section 600 mm2 Holding power sled pliers - up to 1,6 t Holding force holding pliers - up to 1 t Thrust - up 0.4 t Damping - hydraulic Feed accuracy +-0.01 mm (distance) Tech. Data VS 3 Max. Band width 160 mm maximum advance length 230 mm Max. Band thickness 2.5 mm, max. band cross-section 400 mm2 Holding force slide clamp up to 900 kg Holding pliers up to 600 kg, feed capacity 240 kg complete with instructions, control, cam
used
bandwidth 90 mm, masses 0.8 x 0.8 x 2.2 m , Btto 320 kg/ pcs
used
material width:300 mm coil weight:0,5 t coil internal diameter:420 - 520 mm coil external diameter:1400 mm weight:0,6 t dimensions (WxDxH):0,8 x 1,2 x 1,7 m expansion:pneumatic
used
Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min
used
coil weight: 2 x 0,15 t clamping range: 265 - 485 mm band width: 200 mm Thickness of sanding paper: 0,1 - 4 mm total power requirement: 0,25 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Double reel, reel, discharge reel, motor reel for sheet metal processing, punching machine, eccentric press, hydraulic press, automatic punching machine, motor reel, winding roll, decoiler, sheet metal unwinder -Manufacturer: Wanzke, reel height adjustable, with drive -Diameter/width: adjustable, see photos -Drive: 0.37 kW -Speed: 9 rpm -Dimensions: 1000/960/H1410 mm -Weight: 208 kg
used
material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m
used
HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500
used
Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm
used
HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water
used
Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg
used
We have for sale 4 pcs of Hydraulic Press 750 T single action table 3000 x 1900 mm Very good condition Under power
Muller Press, hydraulic press force 1000 T, double action, table 2600 x 2250 mm 2 pcs available
used
Foil stamping press make SCHÖN & CIE type 22 BFabr. -No: 25864Technical specifications:max. pressing force 60 tTable size 350 x 320 mmHeating power 50 - 450 ° CPunching stroke adjustable 1 - 14 mmDrive power 1.5 hp / 1410 rpm.External dimensions 800 x 1100 x 1550 mmWith:- infinitely adjustable punching and embossing time- infinitely adjustable film transport- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...
used
Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic single-column press make SCHÖN type UTE-BCFabr. -No: 1619 built in 1977Max. Press force: 50 tStroke length: 150 mmTable size: 550 x 750 mmDiarrhea opening: 80 mmBear size: 500 x 300 mmOutreach: 280 mmInstallation height: 350 mmPassage width to the rear: 150 mmDrive power: 7.5 hpDimensions L x W x H: 1300 x 1400 x 2400 mmWeight approx. 2000 kgWith- adjustable stoppage time- Blower- Jogging mode- Photocellused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your ...
used
Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Laepple Hydraulic Press 750 T Single Action – Table 3000 x 1900mm Excellent condition 4 pcs available