We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 45 mm max. module: 1.00 max. gear wheel width: 45 mm Pitch min.: 6 max.: 180 Milling cutter speeds: number (steps): 8 from: 900 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.50 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 600 mm Width: 500 mm Height: 1300 mm Various accessories: Coolant system Dividing plates
used
Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.
used
Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm
used
RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Max diam 250 , max lenght 2000, 3 x heads , change gears
used
max. wheel diameter: 0 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. ...
used
max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Technical details: Wheel diameter - max. 406 mm, wheel width 420 mm, module - max. 4.3, module - min. 0.5, cutter speeds 49 - 246 rpm, table bore diameter 80 mm, total power requirement 7 kW Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 2,200 mm, weight approx.: 3,500 kg
used
Description: Control type: conventional, technical details: tool holder MK4, tool diameter max. Ø 145 mm, table size L: 800 x W: 700 mm, clamping surface Ø 300 mm, table travel 200 mm, division max. 5 module, total power requirement 7.5 kW, machine weight approx. 4.9 t, space requirement approx. 2.8 x 1.5 x 2.3 m, additional information: Application: Gear hobbing machine for gearing straight and helical spur gears, worm gears as well as rollable profiles, cycle milling and individual milling as well as counter and synchronous milling , Information on the machining of spur and worm gears: -Outside Ø max. 250mm with counterholder -Division max. 5mm (module), -Tooth bevel max. 45°, -Tooth width max. Axial milling 200mm and radial-axial milling 240mm, -Milling width max. clamping table counterholder 655mm, milling slide: -swivel 210°, -travel path 350mm, -feed, 2 directions, 16 steps in ...
used
max. wheel diameter:90 mm gear width:300 mm max. module:3 tip circle diameter:max. 65 mm root circle dia. min.:28 mm max. geared Length:150 mm tool length - max.:203 mm tangential ( y-axis ):140 mm axial ( z-axis ):400 mm Tailstock ( z²-axis ):350 mm loading and unloading portal ( z³-axis ):1850 mm milling head -swivable +/-:+ A = 40 / - A = 40 ° working piece table: max. outer diameter / bore hole:120 / 45 mm feeds X-axis:1 - 10000 mm/min feeds Z-axis:1 - 10000 mm/min rapid power traverse in X-and Z direction:10000 m/min rapid motion - y-axis:5000 mm/min fast rapid z²-axis ( tailstock ):10000 mm/min. speeds of tool:300 - 4000 U/min working piece table speed:0 - 1000 1/min. connected load:44 kVA voltage:400 V control voltage:24 kW weight of the machine ca.:7500 kg dimensions of the machine ca.:3170 x 2975 x 2440 mm
used
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden
used
HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support
used
P1251
used
Under current
used
Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional
used
Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty
Description: See photos for details weight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,600 mm
used
max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1,5 total power requirement: 62 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - wo ...
used
max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...
used
Description: Control type: CNC, control name: Siemens Sinumerik 840 C Technical details: Workpiece diameter at ratio 1:10 300 mm, workpiece diameter at ratio 1:1 212 mm, number of teeth - max. 200, number of teeth - min. 6, x-travel 300 mm, X - axis speed 0.1-5,000 mm/ sec., y-travel 400 mm, Y - axis speed 0.1-5,000 mm/sec., A - axis -170 / +170 °, total power requirement 38 kW, machine weight approx. 10 t, space requirement approx. 4.20 x 2.20 x 2.10 m weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,100 mm
used
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.
new
BENDING ROLLERS FUR RING BENDING MACHINE See picture for more info! DUTCHMACH 90m78mjok Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m