used WMW GOTHA Open Gap Eccentric Presses

material width: 2000 mm material thickness: 10,00 mm no. of straightening rolls: 13 sheet thickness - min.: 3,00 mm diam. of the rolls ca.: 145 mm straightening feed: 16 m/min barrel length ca.: 2330 mm middle distance of straightening rolls: 150 mm back-up rolls ca.: 290 mm No. of supports up / down: 3/3 main drive motor: 30 kW total power requirement: kW weight of the machine ca.: 32 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 2500 mm, 16 mm

Machine type: sheet leveller Stock number: 0997 Make: WMW GOTHA Type: UBR 16 x 2500 /1-10 Year of construction: 1976 Sheet width: 2500 mm Sheet thickness: 16 mm Smallest sheet thickness: 6 mm Number of straightening rollers: 11 Roller diameter: 180 mm Straightening roller diameter: 180 mm Target speed: 10-16-20 m/min Flow speed: 10 m/min Total power requirement: 75 kW Machine weight approx.: 46 t

material width: 2500 mm material thickness: 16,00 mm no. of straightening rolls: 11 sheet thickness - min.: 6,00 mm straightening roll diameter: 180 mm straight. speed ca.: 10-16-20 m/ min bending speed: 10 m/min total power requirement: 75 kW weight of the machine ca.: 46 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 2500 mm material thickness: 16,00 mm no. of straightening rolls: 11 sheet thickness - min.: 6,00 mm straightening roll diameter: 180 mm straight. speed ca.: 10-16-20 m/ min bending speed: 10 m/min total power requirement: 75 kW weight of the machine ca.: 46 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t dayligth: - mm stroke: 8 - 160 mm table surface area: 900 x 900 mm cutting surface: 5500 mm² column travel -side: 560 x 560 mm distance between columns: 950 mm ram adjustment: 125 mm number of strokes - idle run: 42 min-1 table height: 800 mm clamping plate thickness: 100 total power requirement: 18,5 kW weight of the machine ca.: 13,9 t dimensions of the machine ca.: 2,415 x 2,17 x 4,03 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 1600 mm wide. The mill was hardly used because it was the second machine in the plant and served as a spare machine. Currently un-exploited. The machine is undergoing modernization, a completely new control system. The possibility of adapting to the customers needs (extension with roller feeders, receiving, the possibility of sanding rolls and rollers, etc.). Technical data : - year of production: 1983 - sheet thickness: 20 mm - sheet width: 1600 mm - upper straightening rolls: 5 pcs - lower straightening rolls: 6 pcs - rolling speed 10 m / min - engine power: 37 kW - engine power: 2 x 18.5 kW - engine power: 1,1 kW - engine power: 1,1 kW - weight: 39150 kg

Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant

MAX 20 X 1600

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE   WMW Zeulenroda TYPE     PYE 250 N YEAR    80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force   250 Ton Table Length x Width  900 x 630 mm Throat360 mm Die height   1000 mm Stroke Length   500 mm Power  11 kW DIMENSIONS Length    1250 mm Width     2000 mm Height   3800 mm  

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

heavy press with casting stand

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size: 240 x 210 mmProjection: 165 mmDistance table - ram: 250 mmExternal dimensions L x W x H: 400 x 310 x 640 mmColour blueused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size drm. : 200 mm2 recesses in the table: 30, 60 cm wideProjection: 265 mmDistance table - ram: 390 mmExternal dimensions L x W x H: 600 x 280 x 870 mmColor grayused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column screw press make probably WMWTechnical specifications:Pressing force approx.: 10 t (estimated)Handwheel diameter: 800 mmProjection between the uprights: 400 mmTable size: 350 x 440 mmHole in the table Drm. : 100 mmRam: 130 x 110 mmInstallation height: 300 mmExternal dimensions L x W x H: 900 x 500 x 1780 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size Drm. : 200 mmThroat: 250 mmDistance table - ram: 300 mmMandrel diameter: 45 mmExternal dimensions L x W x H: 550 x 220 x 700 mmColor orangeWith- Base 1000 x 500 x 830 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation.

Pressing force: 2500kN, throat depth: 450mm, ram stroke: 40-160mm, weight: 16,2t, including documentation.

pressure: 63 t distance between columns: 320 mm stroke: 8 - 120 mm table-size: 800 x 600 mm ram surface: 500 x 400 mm throat: 315 mm dayligth: 410 mm ram adjustment: 70 mm no. of strokes: 56 / 90 Hub/min total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions: 2,10 x 1,52 x 2,72 m inclinable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t